All External Airsoft Parts & Attachments

If you're running a heavy LMG or DMR build, the NUPROL Bipod Foregrip w/20mm Picatinny Side Rail is the ideal accessory! A combination of a vertical foregrip and spring-loaded bipod with a 20mm Picatinny side rail, this nifty device is inspired by the real "Grip-pod" issued to the British Army for the L85A2 and often seen on MK46 LMGs wielded by US Special Forces.

To deploy the bipod, simply press the button on the front (or rear, depending on how you orient the grip on your rail). To stow it, simply push the legs together and then upwards until they lock into place. This version of the Bipod Foregrip also includes a 20mm Picatinny side rail, ready for a tactical flashlight, laser or whatever else you need.

The Bipod Foregrip mounts to 20mm Picatinny rails via its integral mount, requiring no tools to do so; simply loosen the wing nut on the side, position the grip and tighten the wing nut down again. Whether you're building out your L85 for the "in-theatre" look or you need something lighter than a conventional bipod for your LMG or DMR, you're in good hands with the NUPROL Bipod Foregrip w/20mm Picatinny Side Rail on board!

If you're running a heavy LMG or DMR build, the NUPROL Bipod Foregrip w/20mm Picatinny Side Rail is the ideal accessory! A combination of a vertical foregrip and spring-loaded bipod with a 20mm Picatinny side rail, this nifty device is inspired by the real "Grip-pod" issued to the British Army for the L85A2 and often seen on MK46 LMGs wielded by US Special Forces.

To deploy the bipod, simply press the button on the front (or rear, depending on how you orient the grip on your rail). To stow it, simply push the legs together and then upwards until they lock into place. This version of the Bipod Foregrip also includes a 20mm Picatinny side rail, ready for a tactical flashlight, laser or whatever else you need.

The Bipod Foregrip mounts to 20mm Picatinny rails via its integral mount, requiring no tools to do so; simply loosen the wing nut on the side, position the grip and tighten the wing nut down again. Whether you're building out your L85 for the "in-theatre" look or you need something lighter than a conventional bipod for your LMG or DMR, you're in good hands with the NUPROL Bipod Foregrip w/20mm Picatinny Side Rail on board!

If you're running a heavy LMG or DMR build, the NUPROL Bipod Foregrip w/20mm Picatinny Side Rail is the ideal accessory! A combination of a vertical foregrip and spring-loaded bipod with a 20mm Picatinny side rail, this nifty device is inspired by the real "Grip-pod" issued to the British Army for the L85A2 and often seen on MK46 LMGs wielded by US Special Forces.

To deploy the bipod, simply press the button on the front (or rear, depending on how you orient the grip on your rail). To stow it, simply push the legs together and then upwards until they lock into place. This version of the Bipod Foregrip also includes a 20mm Picatinny side rail, ready for a tactical flashlight, laser or whatever else you need.

The Bipod Foregrip mounts to 20mm Picatinny rails via its integral mount, requiring no tools to do so; simply loosen the wing nut on the side, position the grip and tighten the wing nut down again. Whether you're building out your L85 for the "in-theatre" look or you need something lighter than a conventional bipod for your LMG or DMR, you're in good hands with the NUPROL Bipod Foregrip w/20mm Picatinny Side Rail on board!

If you’re looking for a clean, stylish suppressor to complete a premium airsoft rifle build, the EMG Guardian Airsoft Suppressor is a perfect choice. Precision-machined from CNC aluminium, it offers a flawless finish and features standard 14mm CCW threading, making it compatible with most airsoft assault rifle platforms.

Inspired by real-steel SureFire SOCOM suppressors, it features engraved EMG training trademarks and an arched grip section at the base for easy, secure fitting. The suppressor is also tracer-ready, with a removable base that reveals an internal spring designed to hold tracer units such as the AceTech Lighter S.

Available in three different lengths, the EMG Guardian suits any setup, from compact CQB builds to longer DMR platforms.

If you’re looking for a clean, stylish suppressor to complete a premium airsoft rifle build, the EMG Guardian Airsoft Suppressor is a perfect choice. Precision-machined from CNC aluminium, it offers a flawless finish and features standard 14mm CCW threading, making it compatible with most airsoft assault rifle platforms.

Inspired by real-steel SureFire SOCOM suppressors, it features engraved EMG training trademarks and an arched grip section at the base for easy, secure fitting. The suppressor is also tracer-ready, with a removable base that reveals an internal spring designed to hold tracer units such as the AceTech Lighter S.

Available in three different lengths, the EMG Guardian suits any setup, from compact CQB builds to longer DMR platforms.

The EMG Guardian Tracer Mock Suppressor is the perfect upgrade for players looking to add aggressive styling, tracer performance, and practical barrel extension to their airsoft rifle. Featuring a built-in AceTech tracer unit housed within a compact and lightweight suppressor body, the Guardian delivers outstanding BB illumination while maintaining a clean, professional look. Ideal for CQB, woodland, and low-light environments, this is a premium muzzle device designed for serious airsoft use.

If you're seeking stock options for your Delta Armory STRIBOG™ or 1913 interface-equipped platform, this is what you need! The Delta Armory 1913/20mm Picatinny Minimalist Stock for STRIBOG™ AEGs is made with a robust steel folding mech and integral QD sling sockets, a side folding design with a button-less folding mechanism. This stock mounts to the 1913/20mm Picatinny stock interface found on the STRIBOG™, MPX, MCX, VMP-2S, VMP-2SD and VMP-2C platforms. 

The set includes the choice of two CNC aluminium stock bars, a drop-stock which lowers the butt plate to provide more clearance for full face protection and a conventional straight stock bar. Whether your STRIBOG™ is short of a stock or you're after more modular stock options for your 1913 interface-equipped primary, the Delta Armory 1913/20mm Picatinny Minimalist Stock for STRIBOG™ AEGs is a great option!

If your STRIBOG™ is going stockless, here's what you need! The Delta Armory Polymer Folding Stock for Grand Power STRIBOG™ AEG is designed to replace the included 1913/20mm Picatinny interface, offering a simple, robust side folding stock with QD sling sockets built into each side, ready for QD sling swivels. 

This is the STRIBOG's simplest stock option, akin to older SMGs like the UMP, with its lightweight, skeletonised design and serrated butt plate. At the heel of the stock, we can also find a discrete Delta Armory logo engraved in, but realism fans need not worry; this marking is small enough that it won't mar the realistic looks of your STRIBOG™!

If your primary has a 1913/20mm Picatinny stock adapter and you like the idea of a folding stock, the Airsoft Artisan 1913/20mm Picatinny M4/AR-15 Folding Stock Tube Adapter is exactly what you need. This high-quality aluminium adapter comes with a steel mounting bolt and buffer tube.

The buffer tube is machined to allow for wire routing in rear-wired setups. The main perk of this stock adapter is its low weight, tipping the scales at 323g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock-equipped AEG or GBBR, this is perfect for the job!

If your primary has a 1913/20mm Picatinny stock adapter and you like the idea of a folding stock, the Airsoft Artisan 1913/20mm Picatinny M4/AR-15 Folding Stock Tube Adapter is exactly what you need. This high-quality aluminium adapter comes with a steel mounting bolt and buffer tube.

The buffer tube is machined to allow for wire routing in rear-wired setups. The main perk of this stock adapter is its low weight, tipping the scales at 323g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock-equipped AEG or GBBR, this is perfect for the job!

Designed to prevent accidental HOP-up adjustments, the Perfect Airsoft TDC Shield for Novritsch SSG11 Sniper Rifle mounts to the top of the SSG11's TDC HOP-up dial, shielding it from the front and sides. This prevents your rig, sling, or the environment itself from catching on the dial and affecting your zero. The dial is still accessible through the open section, which faces the shooter, allowing for mid-firefight adjustments to cope with changing conditions. 

The TDC Shield is made from polymer and mounts via a single screw, making installation an absolute breeze. Compatibility-wise, this part is strictly for the Novritsch SSG11 and is unlikely to work with other sniper rifles. If you want to perfect your SSG11's on the field functionality, the Perfect Airsoft TDC Shield for Novritsch SSG11 Sniper Rifle will do the trick!

If you want a real-steel look with adjustable length, the EMG Gemtech Lunar 9 Mock Suppressor is a great choice for pistols, DMRs, and everything in between. Made from CNC-machined aluminium, it features faithfully reproduced Gemtech trademarks and a branded Gemtech logo end cap.

Sleek yet aggressive in design, the Lunar 9 looks right at home on 9mm and .300 Blackout platforms, though being airsoft, anything goes. The suppressor’s length is adjustable by removing the front section and refitting the Gemtech front cap, giving you a full length of 19cm or a compact 13cm configuration.

Both setups offer enough internal space to house a tracer unit, making it ideal for CQB and low-light games. It mounts to the common 14mm CCW, making it appropriate for any Airsoft platform from pistols to DMRs!

If you're searching for parts to customise your TM Saiga-12, the Laylax 1913/20mm Picatinny Rear Stock Base for TM Saiga-12K GBB will give it a touch of modernity! Made from CNC-machined aluminium with a QD sling socket built in, this stock adapter allows cutting-edge 1913/20mm Picatinny stocks to be fitted in seconds and switched out at will.

The 1913 interface allows you to choose from minimalist folding stocks, AR buffer tube adapters, Visor/Respirator stocks ideal for full face protection and plenty more, just like the ultra-modern MCX and MPX platforms. We think the Saiga 12 would look mint with the Airsoft Artisan MCX Triangle Folding Stock, but with this adapter on board, your options are practically unlimited!

If your LCT or GHK folding stock AK doesn't feel modern enough, this is for you! The Airsoft Artisan M4 Stock Adapter for LCT/GHK AK Folding Stock Series allows you to attach a standard M4 stock to your AK, improving its ergonomics and its style if you pair it with some other modern furniture!

The stock tube is constructed from CNC aluminium and features a skeletonised design, which makes it weigh on 160g! On both sides of the buffer tube, there are points where you can mount the included QD sling point. There are seven points of adjustment underneath, so you can set your stock to the perfect length for your playstyle.

If you want to bring your LCT or GHK folding stock AK to the 21st century, the Airsoft Artisan M4 Stock Adapter for LCT/GHK AK Folding Stock Series is a great place to begin!

If your LCT or GHK folding stock AK doesn't feel modern enough, this is for you! The Airsoft Artisan M4 Stock Adapter for LCT/GHK AK Folding Stock Series allows you to attach a standard M4 stock to your AK, improving its ergonomics and its style if you pair it with some other modern furniture!

The stock tube is constructed from CNC aluminium and features a skeletonised design, which makes it weigh on 160g! On both sides of the buffer tube, there are points where you can mount the included QD sling point. There are seven points of adjustment underneath, so you can set your stock to the perfect length for your playstyle.

If you want to bring your LCT or GHK folding stock AK to the 21st century, the Airsoft Artisan M4 Stock Adapter for LCT/GHK AK Folding Stock Series is a great place to begin!

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762-QD Dummy Suppressor belongs on your gat! Well-suited to Sig MCX and Rattler builds, this suppressor comes with a steel flash hider for the QD purpose, which mounts onto any 14mm CCW threading. The SRD762-QD makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Inside the SRD762-QD, you'll find a spacer to accommodate a 34mm diameter tracer module, and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762-QD Dummy Suppressor is as well-made and good-looking as they come!

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762-QD Dummy Suppressor belongs on your gat! Well-suited to Sig MCX and Rattler builds, this suppressor comes with a steel flash hider for the QD purpose, which mounts onto any 14mm CCW threading. The SRD762-QD makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Inside the SRD762-QD, you'll find a spacer to accommodate a 34mm diameter tracer module, and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762-QD Dummy Suppressor is as well-made and good-looking as they come!

If you want to give your Glock sidearm a more menacing look, the Airsoft Artisan Rail-Mounted Compensator for Glock 17 & 18C GBB will do the trick! A truly gorgeous piece of CNC-machined aluminium with a hard-wearing anodised finish, this compensator is rail-mounted, meaning it won't mess with accuracy or compromise gas efficiency, unlike compensators which mount to the barrel. 

The compensator includes a built-in 20mm Picatinny rail, ready for your choice of tactical flashlight or laser aiming module. Compatibility-wise, this comp is specifically for the "service pistol" sized Glocks, the Glock 17 and Glock 18C, and won't fit other Glock designs. Give your Glock a sprinkle of aggression with this stylish and superbly made compensator from Airsoft Artisan!

Whether your CM.098 upper receiver is battered or you're working on a hot-swap upper project, the CYMA Alloy Upper Receiver for CM.098 AEG should please! Made from alloy with a charging handle, mock bolt, dust cover, and forward assist button pre-installed, this set makes a great start to a "hot-swap" upper project, but also makes a fantastic replacement if your CM.098 series AEG is scratched, marked or cracked. Compatibility-wise, this is strictly for CYMA's CM.098 SR-25 AEG series and is unlikely to work with other brands' SR-25 replicas. 

If you're running an AMD-65 or AK and need more rails, the Airsoft Artisan AMD-65/AK 20mm Picatinny Rail Mount was made with you in mind! Immaculately machined from aluminium using CNC technology with a hard-wearing finish, this rail mount is designed to mount between the barrel and gas tube, on the rear of the gas block, providing 20mm Picatinny rails on each side with QD sling sockets built in. 

Compatibility-wise, this should fit AMD-65 replicas perfectly and can also be paired with most AK-47/74 replicas, though you may need to carry out modifications or change parts for a perfect fit. 

If you're running an AMD-65 or AK and need more rails, the Airsoft Artisan AMD-65/AK 20mm Picatinny Rail Mount was made with you in mind! Immaculately machined from aluminium using CNC technology with a hard-wearing finish, this rail mount is designed to mount between the barrel and gas tube, on the rear of the gas block, providing 20mm Picatinny rails on each side with QD sling sockets built in. 

Compatibility-wise, this should fit AMD-65 replicas perfectly and can also be paired with most AK-47/74 replicas, though you may need to carry out modifications or change parts for a perfect fit. 

If you need a menacing suppressor to top off your build, the EMG CGS Group Helios DT Airsoft Suppressor is a slick choice! An ultra-modern suppressor design based on the real steel CGS Helios DT, the EMG replica boasts official licensing from Chaos Gear Supply (CGS) Suppressors with the gorgeous engraved trademarks that come with it!

Designed to accept tracer modules of 28mm diameter or even larger modules via its internal 14mm CCW male threading, the Helios DT is a versatile device equally at home looking great on your primary as it is with a tracer module, foam filling or covering an extended inner barrel.

The "DT" in the name denotes "direct thread", meaning you can rock the ultra-modern suppressor look without the excess weight or complication of a QD mechanism, the valuable niche the Helios DT occupies in the real steel suppressor market. If you're all about realism, seeking a suppressor for your rifle build, the EMG CGS Group Helios DT Airsoft Suppressor is the perfect finishing touch!

If you're looking for a modern QD suppressor to trick out your build, the EMG CGS Group SCI-SIX Airsoft Suppressor is what you need! Licensed by Chaos Gear Supply (CGS) Suppressors via EMG, this QD suppressor is made from CNC-machined aluminium with flawlessly engraved realistic trademarks across the design, elevating the realism of any rifle build.

The SCI-SIX mounts to the included flash hider via QD threading, making it quick to mount and remove, with no tools required. The included flash hider is made from steel and mounts to 14mm CCW male barrel threading, making it compatible with most AEGs and GBBRs. If you seek a slick, modern suppressor with detailed trademarks and an aggressive aesthetic, the EMG CGS Group SCI-SIX Airsoft Suppressor belongs on your build!

If you're styling up your SCAR and need more stock options, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG should be on your shopping list! Made from flawlessly machined aluminium with a hard-wearing anodised finish applied, this adapter fits WE and VFC SCAR replicas, both the L and H models, in both GBBR and AEG flavour.

The set includes the adapter itself, with integral QD sling sockets on each side, and a GBBR-style buffer tube with a steel castle nut. The included buffer tube offers 6 adjustment positions and should fit most M4/AR-15 sliding stocks on the market. If you're sick of the Ugg boot stock and want all the options under the sun for your SCAR, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG will do the trick!

If you're styling up your SCAR and need more stock options, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG should be on your shopping list! Made from flawlessly machined aluminium with a hard-wearing anodised finish applied, this adapter fits WE and VFC SCAR replicas, both the L and H models, in both GBBR and AEG flavour.

The set includes the adapter itself, with integral QD sling sockets on each side, and a GBBR-style buffer tube with a steel castle nut. The included buffer tube offers 6 adjustment positions and should fit most M4/AR-15 sliding stocks on the market. If you're sick of the Ugg boot stock and want all the options under the sun for your SCAR, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG will do the trick!

If your CM.098 lower receiver is looking worse for wear, this original replacement will have it looking factory-fresh! The CYMA Alloy Lower Receiver for CM.098 AEG is made from alloy, packaged with a magazine release, bolt catch and ambidextrous fire selectors. 

Compatibility-wise, this lower is designed specifically for the CM.098 AEG series and is unlikely to work with other brands' SR-25 AEGs. Whether your lower is a bit scratched or it's taken a massive impact and cracked, the CYMA Alloy Lower Receiver for CM.098 AEG is the key to fixing it up!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, with faithful licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Mock Suppressor with Flash Hider will do just that!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, with faithful licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Mock Suppressor with Flash Hider will do just that!

If you're looking for a realistic tracer unit to complete your build, the EMG CGS Group SCI-SIX Airsoft Suppressor; FLARE Mono Tracer is a fantastic option! Licensed by Chaos Gear Supply (CGS) Suppressors via EMG, this QD suppressor is made from CNC-machined aluminium with flawlessly engraved realistic trademarks across the design, elevating the realism of any rifle build.

The included flash hider is made from steel and mounts to 14mm CCW male barrel threading, making it compatible with most AEGs and GBBRs. Included in the set is a 14mm CCW to 11mm CW adapter, allowing you to remove the internal FLARE Mono module and mount it to your WE or Army Armament pistol, should you need to. If you need a menacing, modern suppressor with licensed trademarks, a flawless build and a well-respected tracer module inside, the EMG CGS Group SCI-SIX Airsoft Suppressor; FLARE Mono Tracer is exactly that!

If you need a tracer with realistic styling, the EMG CGS Group Helios DT Airsoft Suppressor; FLARE Mono Tracer is exactly that! An ultra-modern suppressor design based on the real steel CGS Helios DT, the EMG replica boasts official licensing from Chaos Gear Supply (CGS) Suppressors with the gorgeous engraved trademarks that come with it!

Inside, this variant is equipped with an EShooter FLARE Mono tracer unit, a compact muzzle flash tracer which is already on the market and is well respected. The unit can be used either inside the Helios DT or separately using the included 11mm CW thread adapter, meaning if you need a suppressor for your rifle and a compact tracer for your pistol, this set can do both at once!

The "DT" in the name denotes "direct thread", meaning you can rock the ultra-modern suppressor look without the excess weight or complication of a QD mechanism, the valuable niche the Helios DT occupies in the real steel suppressor market. If you need an instinct aiming advantage up close but you prioritise realism, the EMG CGS Group Helios DT Airsoft Suppressor; FLARE Mono Tracer is the right tool for the job!