All External Airsoft Parts & Attachments

The Acetech Quadra Muzzle Flash Tracer Unit is built for players who want maximum visual effect in a compact size. Designed with aggressive pistol builds and compact primaries in mind, this Airsoft tracer unit keeps your setup sleek while adding bright tracer illumination and realistic muzzle flash simulation. Its CNC-machined aluminium body provides excellent durability without unnecessary weight, making it ideal for speedsoft, CQB, and night skirmishes.

With three selectable firing modes, including tracer only, muzzle flash only, or a combined effect, the Quadra adapts easily to different environments and gameplay styles. Whether you're running a sidearm indoors or a short AEG outdoors at dusk, this tracer unit enhances shot visibility for both aiming feedback and intimidation factor. The compact dimensions also mean it fits most open holsters, allowing pistol users to keep it mounted without disrupting draw speed.

Internally, the unit houses a rechargeable Li-ion battery with USB-C charging for modern convenience and fast top-ups between games. Supporting firing rates up to 35 rounds per second, it keeps up with high-speed builds and rapid trigger setups. Rear-mounted buttons allow simple power and mode selection, though setup should be completed before mounting to a pistol, as controls become inaccessible once installed.

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you need an optic on your SMG-5 or G3 setup, this will do the trick! The Tokyo Marui Low 20mm Picatinny Rail Mount for SMG-5/G3 is made from alloy, providing a 20mm Picatinny rail on the top, ready for your choice of red dot sight or scope.

This mount affixes to the HK claw lugs present on SMG-5, G3, HK33/53 and MC51 receivers and should fit most options on the market, though ideally this is paired with a Tokyo Marui-branded platform. If you want a red dot sight or scope on your SMG-5 or G3, add this, and you'll be set!

If you're looking for ways to customise your AK, the 5KU Folding AK Skeleton Stock w/Folding Butt Plate is the key! Designed for side-folding AK receivers (AKS-74, AKS-74U, AK-74M, etc.), this ultra-modern stock is made from CNC-machined aluminium, boasting lower weight than the standard AK skeleton stock, improved ergonomics and a folding butt plate to make it even more compact.

Compatibility-wise, this should fit most AK side-folding receivers on the market, both GBBR and AEG, though certain brands will potentially require modification. If you're after a modern side-folding stock solution for your AK build, 5KU has you covered with the Folding AK Skeleton Stock w/Folding Butt Plate!

If your Deagle simply isn't big enough, you need this conversion kit! The Armorer Works 10" Hand Cannon Kit for Desert Eagle, is compatible with Armorer Works and WE Desert Eagles (some are branded Cyber Gun), and gives you a whopping 10" barrel.

Along with an extended barrel, you get plenty more rail space for accessories and a 14mm CCW threaded tip. Also included in this conversion kit are a Racoon City-styled pistol grip, a rear iron sight and an extended safety lever.

Beef up the already beefy Deagle with the Armorer Works 10" Hand Cannon Kit for Desert Eagle and make it look like the iconic sidearm from "Resident Evil 2"!

This conversion kit will require you to disassemble your Desert Eagle to install it. Make sure you know what you are doing before attempting this!

This lens protector is a must-have product for any Airsoft Skirmisher who intends to play in a CQB environment, protecting your sights and scopes from being shot out by stray BB. Guess what's cheaper: A new sight or lens protector?

Ships with peel-off protective film to keep the lens perfectly clear when you attach it to your RIF.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

If you love realism and will do anything to get closer to the real thing, the HASTA NEBULA Tactical Mist Tracer Unit Gen.2 belongs on your primary. The first of its kind in the world, this tracer unit not only provides muzzle flash, rainbow muzzle flash and tracer functionality but also provides realistic simulated muzzle gasses with each shot. With slick new functionality comes the need for intel, so make sure you thoroughly read the "Special Instructions" section of the full product description before ordering!

This is the Gen.2 version, redesigned to be smaller, lighter and stronger than ever before. The new unit is now only 36mm in diameter, around 10mm shorter and tips the scales at approximately 179 g, making it nearly 30g lighter than the original. Other improvements include a fixed fluid tank to eliminate the possibility of leaks if installed incorrectly and a stronger rear collar, ensuring if you hit cover with your NEBULA Gen.2 mounted it has a far higher chance of survival!

The mist generation function runs off a water-glycol solution, just like smoke machines used in film and TV production and the internal fan gently blows the simulated muzzle gas out of the front of the suppressor each time a BB passes through. Powered by an internal rechargeable LiPo battery and charged via Micro-USB, the NEBULA Gen.2 is a seriously groundbreaking piece of Airsoft technology and we are pleased to see it return in its new and improved form!

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

If you're in the market for a micro tracer unit but you want muzzle flash, the Eshooter FLARE M Tracer Unit with Muzzle Flash is your best bet. This ultra-compact tracer unit rivals the smallest on the market, measuring approximately 5.4cm long with a 2.8cm diameter and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE M is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE M is intended to be mounted on 14mm CCW male threaded outer barrels and includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare M. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter and you can rock the FLARE M too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE M charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE M is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

A Suppressor for Airsoft Guns with a 14mm Clockwise or Counter Clockwise Thread, which is made from Aluminium to be both tough and lightweight. 

The Suppressor is foam filled, which will slightly dampen your Muzzle Report, and it also has a Spring Core which keeps the foam in position and stops your BBs fouling on the foam as they try to leave the barrel. 

If you have a custom Airsoft Gun or want to hide an Inner Barrel Extension, then this Dummy Sound Suppressor is the perfect finishing touch.

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

If you are after a lightweight, simple suppressor to add to the look of your AEG, rather than dominating it, the Dummy sound suppressor from CYMA may be just what you need!

An Airsoft suppressor designed to be fit onto Airsoft guns which have a 14mm Counter Clockwise, CCW, threaded outer barrel, and has a textured body for easy attachment and removal. The suppressor is filled with foam designed to reduce the amount of noise your gun makes by absorbing a small amount of the sound when your Airsoft Gun is fired.

This suppressor is perfect for any Airsoft Skirmisher who is looking to give their Airsoft rifle a new look, or for those who want to modify the sound of their Airsoft replica.

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

A mock Suppressor for Airsoft Guns with a 14mm CCW Thread, which is made with an Alloy Outer Shell and features Foam Inserts inside to slightly deaden the sound of your replica, and a Spring Core to ensure the BB Flight Path stays clear. Perfect for hiding an Inner Barrel Extension or just to make your Replica that extra bit 'tacti-cool'.

A thread adaptor which allows the attachment of Silencers and Suppressors to WE Europe Pistols with internally threaded 11mm CW outer Barrels. This adapter provides a 14mm CCW male thread, ready for the most common tracer units and suppressors!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).