- Three Round Burst
- Electronic Trigger Unit
- RIS/KeyMod Handguard
An electric powered M4 replica with an Alloy receiver, a programmable three round burst, electronic trigger unit for a sharper trigger response and an Alloy combination RIS/KeyMod handguard.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
This compact and sturdy offering from G&G is almost exclusively built from a tough Alloy, only the pistol grip and stock are made from Polymer which leads to a very solid rifle which is pleasant to shoulder. It features all the usual electronic goodness you would expect from a higher-tier G&G product, such as their electronic trigger unit which gives you a sharp and snappy trigger response and lighter pull. It also features a three round burst mode which is engaged by holding the trigger down in single for 10 seconds which replaces your auto with burst. The robust Alloy handguard features a combination of short 20mm RIS rails, a full length top RIS rail and several KeyMod slots which forms a groove for your hand with no accessories attached, and offers you plenty of options should you wish to attach your torches, lasers, grips and more! By removing the grub screw in the flash hider, it will rotate off to reveal a 14mm CCW standard thread for the addition of suppressors, tracer units and other muzzle devices that are compatible to further enhance the performance or aesthetic of this already top-tier performer. The weapon is rear wired and has a six position sliding crane stock which leaves you ample battery space; we recommend the use of a 9.6v 1600mAh NIMh battery with this weapon due the low voltage cutoff, which means that the weapon will stop firing when a lower power battery starts getting drained. If you're looking for top-shelf performance in a compact package with high quality build materials for a substantial feeling RIF, this is the choice for you.
Features:
- G&G Electronic Trigger Unit
- Built-in MOSFET
- Smooth & snappy trigger response
- Low voltage cutoff
- Alloy 20mm RIS/KeyMod combination handguard
- 14mm CCW threaded outer barrel
- Six position sliding crane stock
- Alloy ambidextrous sling plate
- Flip-up iron sights
- Adjustable sights (windage/elevation)
- Rear wired
- V2 gearbox
- Mini Tamiya connector
- Warthog style flash hider
- Three round burst (hold trigger in single for 10 secs)
- Programmable trigger
- Alloy receiver
- Markings:
- GC Combat Machine
- G&G ARMAMENT
- INTERMEDIATE SERIES
- MADE IN TAIWAN
- 006739
Package Includes:
- GC16 MPW AEG
- Magazine
- Manual
- Cleaning Rod
Specification
General
 |
Assault Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 320fps ± 10%, using 0.20g BB
|
 |
|
 |
Regular Player
|
Weight and Dimension
 |
Approx. 2.27kg
|
|---|---|
 |
64cm
|
 |
74cm
|
Construction
 |
Black
|
|---|---|
|
|
Black
|
 |
Alloy flash hider, outer barrel, handguard, receiver, rails, buffer tube & trim. Polymer pistol grip & stock.
|
|
|
Polymer
Alloy
|
 |
Polymer
Alloy
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
M4 / AR15 / M16
|
 |
STANAG
|
 |
    Programmable
|
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Gear
|
 |
Behind mock bolt plate when charging handle to the rear
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS , KeyMod ,
|
 |
Sliding
|
|
|
6 Position
|
 |
Iron Sights
|
 |
Buffer Plate
|
Barrel
 |
Male
|
|---|---|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
210mm
|
Magazine Specific
 |
High Capacity, AEG,
|
|---|---|
 |
Approx. 300 Rounds
|
 |
Fill Window
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V2 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
Battery Specific
 |
 |
|---|
Suggested Battery
 |
Ni-Mh
|
|---|---|
 |
Crane
|
 |
9.6v
|
Product Testing Data
 |
320FPS
|
|---|---|
|
|
ASG Blaster 0.20g BBs
|
|
|
20/10/18
|
Take this Airsoft gun to the next level!
- Approx. 4000 BBs
- Multi-Polish Process
- 1KG Bag of 0.25g BBs
Match Grade BBs created for Airsoft Guns and Weapons, created with a Multi-Polish Process to give an excellent finish. The BBs are constructed from PLA (Polylactide) Material, and feature a 0.01mm +/- Tolerance for improved consistency.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- 300rnd Mid-Cap
- Tough & Weighty
- Steel Construction
A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.
- 3 MOA Target Dot
- 1 MOA Adjustment
- Waterproof & Rugged
A T-1 style optic which is protected by tough Rubber Armour, has eleven levels of brightness on its' 3 MOA Target Dot and comes included with both a high and low profile 20mm mount. Enjoy real-steel quality at Airsoft prices.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- Hex Patterned
- Caliber Markings
- Marui Compatible
A spring-fed mid-cap magazine for AR platform Airsoft replicas, with an attractive Hex-pattern to improve handling and aesthetics ten-fold. They are available in both Black and Tan.
- Red Dot Setting
- Ultra Low Profile
- Adjustable Reticle
A replica of the Trijicon RX01 non-magnified Reflex red dot sight, which provides quick target acquisition whilst in the field, allowing for two eye open targeting.
- Screw Top Lid
- 3300 x 0.25g BBs
- 0.01mm Tolerance
A screw-top bottle that contains 3300 high quality, competition-grade 0.25g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.25g BBs are a great option for those playing outdoors, particularly if you have a high speed gun and want to keep overall BB costs down whilst maintaining top-tier performance.
- For Recoil Shock Guns
- Mid-Capacity Magazine
- 82 Round Capacity Mag
An Airsoft Magazine designed for use with Tokyo Marui's STANAG Accepting Recoil Shock range, with a design based upon the STANAG Standardized Magazine used by NATO Forces.
- Very clear red dot
- 1x magnification
- For 20mm Rails
An Airsoft Sight created by THETA OPTICS which features a red-dot system where a small red dot is projected into the vision of the user while they are looking down the sight. Red dot sights are designed to allow you to aim quicker as once the red dot is zeroed it will always bee on point whatever angle you are looking at the sight through, and also allows you to shoot with both eyes open for a better field of view.
This sight is perfect for those skirmishers who are getting into Airsoft and are looking for a sight which has a great clear sight picture at a low price. The sights' dot is very clear, and is extremely well priced for the quality.
- Compact Tracer
- 35 BBs Per Second
- 22,000 Shot Battery
A fully licensed and Alloy constructed AceTech Tracer Unit which is based on the Noveske KX Series Flash Hiders. It can handle up to 35 BBs per second and will last for roughly 22,000 shots on a full charge of the internal USB-rechargeable battery.
- Foam Filled
- Alloy Construction
- 14mm CCW & 22mm CW
The moment all AK users have been waiting for; a high quality PBS-4 Suppressor replica made from Alloy with both a 14mm CCW and 22mm CW thread.
Like this Airsoft Gun? Check out these awesome Products!
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Slide Forward to Open
- Available in Multiple Sizes
- 40mm MOSCART Launcher
Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.
- Mechanical Recoil
- 14mm CCW Thread
- KeyMod Handguard
A seriously tough and good-looking AR/M4 platform replica which is powered by electric, features a KeyMod rail system complete with handstop and rail adaptor, and comes packaged with the Bolt Recoil Shock System for a hard-kicking mechanical recoil.
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Accurate Replica
- All Alloy Construction
- Period Authentic Replica
A 6mm BB Airsoft gas blowback pistol, based on the iconic M9 handgun. This is an incredibly realistic replica of the Beretta M9 pistol, featuring authentic all alloy externals with ergonomic polymer grips just like the real thing.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- TM AWS Compatible
- AirsoftPro Compatible
- Integrated Carry Handle
Russian rifle lovers rejoice! This replica of the lesser-seen SV-98 platform is a Bolt Action Spring Powered Sniper Rifle which is constructed to be compatible with TM AWS parts, as well as AirsoftPro parts. If you're looking for a Sniper Rifle which is highly upgradeable and different from the norm, you just found it.
- 3 x Magazines
- Consistent Rifle
- Solid Construction
A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.
- Folding Bipod
- Full Stock Design
- Autowind Magazine
An electrically powered 6mm BB Airsoft realistic replica of the updated M249 SAW MK2 with full solid stock, a squad support weapon with a 2400 round magazine and an inbuilt folding bipod allowing it to be fired from an emplaced position.
- Adjustable Stock
- Rear Flip-Up Ironsight
- Part of the SA Core Range
Based off the rifle length M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms as part of their CORE beginner rifles range.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- Full Alloy Design
- High Quality Finish
- Gas Blowback Pistol
A high quality, faithful, Airsoft 6mm BB replica of the Colt 1911A World War 2 (WWII) .45 ACP Pistol. This highly detailed piece really stands out from the crowd with the satisfying recoil and loud report when it fires.
- Fiberglass Polymer
- 14mm CCW Thread
- KeyMod Handguard
G&G have added yet another masterpiece to their infallible Combat Machine series, which features an 8.5" KeyMod Rail System, 14mm CCW Thread, Flip Up Ironsights and a Sliding Crane Stock for Crane Stock style Batteries.
- Electric Pistol
- Fully Automatic Mode
- Great Starter Sidearm
A semi / fully automatic none blowback Airsoft 6mm BB Gun Pistol in the style of the Mark XIX Desert Eagle in .50 Action Express.
- Strong Recoil
- Tough Externals
- Railed Handguard
A compact M4 platform Airsoft Electric Gun, which is more than capable of performing outdoors as well as in CQB, and is packed with the Bolt Recoil Shock System to provide a solid kick in the shoulder when you fire it.
- 20mm Railed Handguard
- Integrated Suppressor
- Quick Change Spring
An Airsoft electric powered 6mm M4 based replica, with an Alloy 20mm RIS handguard, rear wired crane stock, flip up iron sights and an integrated suppressor as standard.
- Stamped Steel
- Sliding Crane Stock
- 14mm CCW Thread
An Airsoft Electric Gun replica of an AK platform rifle, which offers rock-solid external and internal build quality, coupled with a railed handguard, 14mm CCW thread, dovetail side rail and AEG buffer tube with a sliding Crane Stock.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of M9 pistols, featuring 'Racoon City Police' trademarks.