G&G Armament TR16 SBR 308 MK2

G&G Armament
Code:
£369.99
  • No Mag Detection
  • Bolt Lock on Empty
  • Programmable Burst

The G&G TR16 SBR .308 is part of the fantastic range of G&G Products featuring the amazing G2 Gearbox, which offers a tonne of features such as 'No Magazine Detection, Programmable 3/5rnd Burst Fire and Functional Bolt Stop, as well as being ready for 11.1v LiPo Batteries. Enjoy incredible performance and Trigger Response, coupled with a highly realistic construction and operation, to make your Airsoft gaming more immersive than ever!

Full description

Description

Built by G&G to the highest of standards this rifle is part of their top quality range, with durable and robust materials which are sure to last. The weapon is constructed almost entirely from alloy, with an alloy handguard, outer barrel, iron sight set, buffer tube, sling plate, upper and lower receiver and internals, with a polymer stock and pistol grip. The weapon is incredibly sturdy and wobble free thanks to its high-precision design and top quality manufacturing process.

The biggest stand out feature of this weapon is the custom made .308 style receiver, which is designed to mimic .308 style rifles commonly used in the real world as designated marksman rounds thanks to their higher calibre, making it a great starting point to any DMR load-out, or even as a base for advanced DMR builds thanks to its advanced features.

The weapon features G&G's ETU integrated MOSFET system, an electronic control unit which is highly advanced with multiple features. The ETU is designed to add features, as well as protect the weapon, with battery protection to prevent the weapon from firing when the voltage is too low, along with motor jam and spring compression detection should the worst happen. The ETU also adds the ability to reprogram the weapon full auto mode, allowing it to be configured to fire in three and five round burst modes, and can be changed back to full auto mode should it be required. The ETU in this edition of G&G's rifle is also the latest version, being 50% smaller in size, but with all the features you would expect from the original version, a much needed improvement allowing larger batteries to be stored in the stock. The Stock also has a convenient easy-access Butt Pad which just needs pulling out to get access to the battery compartment. Please note that this is hinged and doesn't twist/remove from the Stock, so don't pull too hard!

Thanks to the ETU and the new magazine design the weapon now features a fire-stop system which prevents the weapon from firing when the magazine is empty, or when no magazine is inserted. The magazines are specially designed with button on the rear of the magazine which extends when no BB are in the magazine, and the feed nub is extended so it can be detected by the system. Unlike other the extended nubs found in other brand's magazines G&G's is designed to fold, preventing the nub from being snapped or damaged if the magazine is forcefully placed by accident into the magazine well. The magazine is also semi-transparent, specifically designed to allow you to see the internal mock .308 rounds for added levels of realism, along with a 40 round mid-cap magazine design.

The weapon allows for high levels of customisation, with a modern 8.5'' M-LOK railed handguard that features M-LOK slots for the installation of M-LOK compatible accessories, such as grips, torches, lasers and more. The top of the handguard also features a 20mm RIS / RAS Rail, the most common type of Airsoft rail used, allowing for a wide variety of sights and scopes to be attached to the weapon. The top rail also joins up with the receivers rail to create a full length monolithic rail allowing even the largest sight and scope setups to be used, as well as advanced holographic and magnifier setups with ease. The weapon's flash hider is also removable to reveal a 14mm CCW threaded outer barrel which allows for the attachment of a wide range of aftermarket silencers, suppressors and even tracer units.

The weapon is extremely comfortable to hold, with an extended trigger guard for glove users, a blade trigger for style and ease of use, and an ergonomic pistol grip which features finger ridges for a tighter and more comfortably hold. The rear of the weapon also features an ambidextrous sling plate to allow the use of a wide range of sling setups, including one point slings allowing the weapon to be shouldered quickly.

The weapon is fully ambidextrous, something rarely seen in AR / M4 builds, with an ambidextrous magazine release, fire select and mock bolt release. Thanks to the weapons ambidextrous design the weapon can be used by both left and right handed shooters, and is also great for allowing the user to transition shoulders in tighter environments, or when taking corners.

Included in the box is the TR16 SBR .308 and a 40rnd Mid-Cap Magazine that is filled using a Speedloader, and will feed every single BB into the Gun until it is empty, where it will lock the Bolt back for realism (just insert a fresh Magazine and press the Bolt Release to get firing again). Whether you want an imposing Airsoft Gun that is happy in both CQB and Outdoor environments, or you want an incredibly realistic-operating Replica that makes an excellent base for a DMR Project, then the G&G Armament TR16 SBR .308 is absolutely ideal.

Features:

  • .308 Style DMR Receiver
  • Great starting point for a highly realistic DMR build or loadout
  • Integrated G&G ETU Electronic MOSFET unit
  • Designed for use with 11.1v LiPo battery
  • 8.5'' M-LOK Railed Hanguard for attachments and accessories
  • 90° fire select system for quicker fire mode changing
  • Handguard features full top-length 20mm RIS / RAS Rail for sights and scopes
  • Semi-Transparent 40 Round Mid-Cap magazine
  • Magazine features dummy rounds for extra realism
  • Empty-stop system stops the weapon from firing when the magazine is empty or not in the weapon
  • Magazine feed nub folds to prevent snappage if the magazine is placed into the weapon accidentally unloaded
  • Grub screw secured removable compensator style flash hider
  • 14mm Counter Clockwise CCW threaded outer barrel for attaching silencers and suppressors
  • Completely ambidextrous weapon
  • Ambidextrous magazine release
  • Ambidextrous mock bolt stop
  • Ambidextrous charging handle
  • Ergonomic pistol grip with finger ridges for a more comfortable hold
  • Extended trigger guard for use with gloves
  • Low profile bladed trigger
  • Removable top 20mm RIS / RAS flip-up ironsights
  • Rear ambidextrous sling mounting plate
  • Six position sliding stock
  • Stock can be locked into place to prevent wobble
  • Rubberised butt plate to prevent slippage
  • Rotary style hop-up unit for range and accuracy
  • G&G Warranty sticker sealed gearbox
  • Redesigned gearbox with structural improvements
  • Increase in gearbox strength due to its new design
  • Improved air seal, with double nozzle o-ring and cylinder head
  • Rear wired gearbox for storing battery in the stock of the weapon
  • Programmable ETU Mosfet system
  • Redesigned ETU to reduce space requirements
  • Programmable to 3 round bust, 5 round bust and full auto fire modes
  • Low power battery protection system
  • Motor Jam / Spring Compression warning system
  • Mock gas block and tube for added realism
  • Branded:
    • 'MODEL.'
    • 'G2H ADVANCED'
    • 'CAL. 6mm AEG'
    • 'G200808066'
    • 'P1TR0L3453'
    • 'G&G ARMAMENT'
    • 'COMPLETE A.E.G. SERIES'
    • 'MFG. BY G&G ARMAMENT'
    • 'MADE IN TAIWAN'
    • 'P/N G03215'
    • 'M-LOK RAIL VIII 8.5"'

Package Includes:

  • G&G Armament TR16 SBR 308 MK2
  • 40rnd Low Cap Magazine
  • Instruction Manual

Special Instructions:

This weapon requires a minimum of an 11.1v LiPo to work. If you use a low charge battery, or a battery under 11.1v LiPo the battery protection will be triggered and refuse to fire.

Please note that the weapons butt plate does not slide off, but must be rotated once the catch has been released.

To set Full Auto to 3-Round Burst, switch the fire selector to semi-auto mode and hold the trigger for 10 seconds. Once completed the MOSFET will beep to announce the configuration

To set Full Auto to 5-Round Burst, switch the fire selector five times from semi-auto to full-auto. Once completed the MOSFET will beep to announce the configuration

To reset Full-Auto to Standard, hold the trigger down for 10 seconds. Once completed the MOSFET will beep to announce the configuration.

The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.

Specification

General

Weapon Construction External
Weapon Type
Assault Rifle
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 330fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Package
Included Items
  • Magazine
  • Instruction Manual
Skill Level Icon
User Skill Level
Regular Player, Experienced Player,

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.8kg
Weapon Length Collapsed
Length (Collapsed)
70.5cm
Weapon Length Extended
Length (Extended)
80.5cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Two Tone Icon
Pre Two-Toned
No
Construction Icon
Construction
Alloy flash hider, outer barrel, handguard, receiver, rails, buffer tube, sling plate & trim. Polymer pistol grip & stock.
Weapon Construction External
External Construction
Polymer
Alloy
Gearbox Icon
Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
Powered By
Electric
Blowback Icon
Blowback
None
Weapon Platform
AR Platform, AR .308 LR, Assault Rifle,
Magazine Style Icon
Magazine Style
Assault Rifle, M4 / AR Platform, AR .308,
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Patrol Base | Burst
Burst
Programmable
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Ambidextrous
Weapon Configuration Icon
Weapon Configuration
Standard
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.25g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Rotary
Hop-Up Unit Location Icon
Hop-Up Location
Behind mock bolt when charging handle to the rear

Furniture

Weapon Furniture Icon
Furniture
  • Railed Handguard
  • Flip-Up Ironsights
  • Railed Receiver
  • Ambidextrous Magazine Release
  • Sliding Stock
  • Ambidextrous Fire Selector
  • Ambidextrous Bolt Release
  • Threaded Outer Barrel
  • Ambidextrous Sling Plate
Rail System Icon
Rail System
20mm RIS / RAS , MLOK Rail System,
Icon Stock Positions
Stock Setting
Sliding
Weapon Length Extended
Stock Positions
6 Position
Sight Type Icon
Sight Type
Iron Sights
Sling Plate Icon
Sling Options
Buffer Plate

Barrel

Icon Thread Type
Outer Barrel Thread Type
Male
Icon Thread Direction
Outer Barrel Thread Direction
CCW (Counter Clockwise)
Outer Barrel Thread Size
14mm

Magazine Specific

Magazine Type
Low Capacity , AEG,
Magazine BB Capacity
Approx. 40 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Wiring Icon
Gearbox Wiring
Rear Wired
Digital Trigger Icon
Gearbox Electronic Trigger
Yes
Battery Specific
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Suggested Battery
Suggested Battery Type
Li-Po
Suggested Battery Configuration
Stick
Suggested Battery Voltage
11.1v

Product Testing Data

Notepad Icon
Test Description
330FPS
Notepad Icon
Tested Using
ASG Blaster 0.20g BBs
Notepad Icon
Test Date
18/03/21

Detailed Power Tests

FPS
FPS, using 0.20g BB
Approx. 330fps, using 0.20g BB

Need ideas for something extra?

Like this Airsoft Gun? Check out these awesome Products!