Specna Arms - EDGE™ Range

If you enjoy emptying magazine after magazine, then you probably know the pain of having to spend your hard-earned cash on more BBs. Luckily for you, the Specna Arms EDGE ULTRA 0.25g Precision 6mm BBs are the solution! These BBs are extremely affordable, but don't let this low price fool you! It absolutely does not mean a compromise on quality, as shown with the extremely low tolerance of only 0.01mm, which means the BBs are consistently precise and smooth firing. These BBs come in a 1KG resealable bag and are the 0.25g variant - perfect for assault rifle primaries and Mid-cap magazines.

Reliable and precise, these BBs are both. Whilst boasting a low, affordable price. For spraying and praying or skirmishing on a budget, these BBs are the perfect choice!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

The MK18 SA-E19 EDGE is an EDGE Series replica from Specna Arms, that comes included with a fully licensed Daniel Defense 20mm Rail System, as seen on the MK18, everyone's Special Forces AR of choice. Being an EDGE Series replica, it also comes packaged with the Gate ASTER MOSFET, Quick Change Spring System, Rotary Hop Unit, 6.03mm Inner Barrel, Unique Serial Number and awesome Zinc Aluminium, Steel and Polymer externals.

Specna's ORION™ reinforced gearbox has gained an excellent reputation since it was released installed in the EDGE™ series of AEGs, and now Specna are offering you the opportunity to create your next gearbox build with a solid, reliable shell to tie it all together. Rated to handle heavy springs and including enhancements such as radiused cylinder windows and quick change spring functionality, the ORION™ gearbox shell is probably a tad more affordable than it should be!

Searching for an M4 that stands out? The Specna Arms SA-E39 EDGE™ M4/AR-15 AEG; HAL ETU™ is a full metal build with a unique ported receiver design inspired by weight-reduced 3-gun competition rifles, which prioritise handling and speed. A revamped version of the previous SA-E39, the HAL ETU version boasts modernised ergonomic furniture, M-LOK side rails pre-installed and the HAL programmable MOSFET, adding programmable fire modes, precocking and trigger sensitivity adjustment into the proven EDGE™ internal formula. 

Inside the ORION™ V2 gearbox, we are treated to a CNC aluminium nozzle, a CNC aluminium ball bearing piston head, a CNC aluminium cylinder head, a polymer piston with a full steel tooth rack and an ESA quick-change spring guide with ball bearings in its base to reduce rotational force applied to the gearbox shell. The gearset is a steel 18:1 standard ratio example running on 8mm ball bearing bushings, providing a smoother gearbox report and reducing friction to boost the rate of fire. 

Also inside is Specna's usual 6.03mm tightbore inner barrel and rotary HOP-up combo, providing excellent accuracy potential and the ability to tune trajectory for different ammo weights more precisely than with the older "gear" HOP-up unit. If you're a speedy skirmisher seeking a primary with race gun-style looks, the Specna Arms SA-E39 EDGE™ M4/AR-15 AEG; HAL ETU™ should be on your shopping list!

A highly realistic replica of the instantly recognisable M4A4 platform, which features Zinc Aluminium externals, excellent internal parts, a quick change spring, GATE MOSFET and fully licensed, engraved trademarks.

This '2.0' upgrade to the SA-E14 features a GATE ASTER MOSFET for even more fine control and features than before, a Solar™ Trigger, Helium™ Flat HOP Bucking and the updated ESA2 Quick Change Spring System.

Bring your old AEGs back to life with the Specna Arms 18:1 Steel Gear Set for Core™& EDGE™ Replicas! This standard ratio gearset is made from steel and is compatible with any version 2 or version 3 gearbox-equipped AEG, just like the ones found in the Core and EDGE series from Specna Arms. Being a standard 18:1 ratio set, these gears will turn once for every 18 motor revolutions, giving you a great balance between speed and torque.

These are the perfect replacement parts to keep around just in case of the worst, or you finally get the time to tinker with that ancient Airsoft rifle that's sitting in your garage.

If you need a replacement lower receiver for your M4/AR-15 AEG, this is perfect for you! This Specna Arms Lower Receiver is an original replacement part for the Specna Arms EDGE™ series, but is compatible with most M4/AR-15 AEGS, thanks to its standard shape and dimensions.

It is constructed from alloy, features a preinstalled fire selector, as well as some cool-looking Specna Arms trademarks. This is a great replacement part to get your old Airsoft platforms back up and running. It's affordable and hardwearing, making it a perfect part for your loaner/beginner replica!

If you need to fix up your Specna Arms EDGE™/PRIME™ H-Series, you need this upper receiver! It is a replacement original part, and is a perfect replacement part if your old upper receiver is looking worse for wear. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! 

If you need a replacement lower receiver for your M4/AR-15 AEG, this is perfect for you! This Specna Arms Lower Receiver is an original replacement part for the Specna Arms EDGE™/PRIME™ H-series. The dedicated ESA2.1 revised spring guide (2024) is required for this upper receiver.

It is constructed from alloy, features a preinstalled fire selector, as well as some cool-looking Specna Arms trademarks. This is a great replacement part to get your old Airsoft platforms back up and running. It's affordable and hardwearing, making it a perfect part for your loaner/beginner replica!

If you need to fix up your Specna Arms EDGE™/PRIME™, you need this upper receiver! It is a replacement original part, and is a perfect replacement part if your old upper receiver is looking worse for wear. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! 

If you need a replacement lower receiver for your M4/AR-15 AEG, this is perfect for you! This Specna Arms Lower Receiver is an original replacement part for the Specna Arms EDGE™/PRIME™ series, but is compatible with most M4/AR-15 AEGS. The dedicated ESA2.1 revised spring guide (2024) is required for this upper receiver.

It is constructed from alloy, features a preinstalled fire selector, as well as some cool-looking Specna Arms trademarks. This is a great replacement part to get your old Airsoft platforms back up and running. It's affordable and hardwearing, making it a perfect part for your loaner/beginner replica!