Airsoft Grips & Stocks

Infinitely functional and incredibly comfortable. Dubbed the Heavy Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece. With a rubberised butt plate for comfort when held against your person, this stock goes even further than that! This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

Although branded as 'Heavy Ops' this stock, it's anything but, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. The rubberised butt plate is removed by pushing together the two side pins revealing the battery compartment within. The compartment is wide enough to house a crane stock battery and with an inner length of roughly 17cm, you have ample room to house larger batteries for longer gameplay. The slide adjuster is also widened and textured for ease of adjustment, making you ready for any situation.

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

Is your AR stock too long? Maybe you carry a PDW AR15 AEG as a secondary but don't fancy the additional weight of a PDW sliding stock? The CYMA ultra-compact M4 stock may well be what you have been searching for.

This fits on a normal AR15 buffer tube but is optimized for use with a shortened buffer tube, making it even more compact. The butt plate can be removed similarly to a full-sized crane stock if you have a small enough battery to fit inside this lil' guy! This would also work well with a battery sling.

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Visor/Respirator Stock is designed to mount to any 20mm Picatinny rail, primarily those found on MPX and MCX rifles, and other AEG/GBB primaries with 1913/20mm Picatinny stock mounting apparatus. Feel free to mount it to any rail on your AEG, but don't blame us for the funny looks!

The stock body is constructed from aluminium to keep the weight low, and the butt plate is rubber with linear texture to promote positive grip, with or without body armour. The folding/mounting mechanism is constructed from steel to provide the strength needed, and the QD sockets on either side of the stock are also steel, and fully functional. The Visor/Respirator stock is designed specifically to provide perfect sight alignment when wearing bulky face gear, allowing you to see down your optic without requiring a riser and increasing height over bore.

Looking to make your SMG-5 AEG even more compact? Perhaps you had an accident with your previous stock and need a replacement? Here it is, and at a price that makes sense even for a more affordable SMG-5.

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

If you are rocking a primary with a 1913/20mm Picatinny stock interface, this should be of interest! The SigAir 1913/20mm Picatinny Telescoping Folding Stock is compatible with the SigAir MPX, MCX and any other Airsoft gun with a 1913/20mm Picatinny stock mounting interface. 

Amongst its many tricks, the 1913/20mm Picatinny Telescoping Folding Stock can fold to the side, be adjusted into any of 6 lengths of pull settings and includes a steel QD sling socket on either side. With official licencing from SigAir and full Sig Sauer trademarks, this stock is the perfect addition to a cutting-edge realism-focussed build!

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

This one's for all you AK lovers looking to treat your rifle to a new receiver and stock. Constructed entirely from durable steel, this will undoubtedly give you AK a nice sturdy feel with a good weight balance. The stock itself is skeletonised to keep the weight balance and to allow it to fold into the receiver and lock in place with a latch.

The receiver has all the hallmarks of a classic AK body, with its signature level style mag release and angular trigger guard and is even complete with the iconic AK dovetail side mount, to which you can attach the tactical accessories of your choice.

Whether your looking to spruce up your AK47 with a new receiver and folding stock, or fancy creating some Frankenstein's monster of a rifle by attaching this to a non Russian rifle (we won't judge), this solid piece of gear is a great buy at the price.

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

This slim profile Stock is designed for AR / M4 platform Airsoft Electric Guns, and will attach to any kind of AEG Buffer Tube. There is no dedicated Battery Compartment on this Stock, so you will need to fit your Battery inside the Buffer Tube of your gun. The Rubber Butt Pad is removable to make Battery installation easier; simply pull back the tiny tab on the underside and pull the Pad downwards.

A spare or replacement standard M4 type stock for Airsoft M4/M16/AR-15 AEGs with an AEG type buffer tube.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

A compact, functional and straightforward collapsing Stock for M4 / M16 AEGs, beautifully constructed by PTS. If you're looking for a high-quality Stock that's ergonomic and functional, look no further.

If you own the incredible Tokyo Marui AKM GBBR you should really stick with the stock that's already installed, "nyet, rifle is fine" and all that considered. For those who don't care and want to add some utility to their rifle for greater comfort and flexibility regardless, the EMG Rifle Dynamics stock adapter will bring your AKM into the 21st century! This stock adapter set includes a replacement stock tang with pistol grip mount, and both an M4 GBBR buffer tube adapter and a 20mm Picatinny rail adapter, all precisely machined from aluminium and complete with Rifle Dynamics markings. 

An Aluminium constructed Adjustable Stock for AK Platform replicas that have a Side-Folding Triangle Stock as standard. This Stock will completely replace your original Skeleton Stock and provide a much more comfortable and better looking design, with adjustable Cheek Pad, adjustable Stock length and comfortable adjustable Rubber Butt Pad.

This is one for the AK lovers! The Russian Firearm Fanatics and the Weekend Gopnik Operators, here to complete the tactical aesthetic of your AK is the 5KU PT-3 Telescopic Stock, featuring a full alloy construction and a rubber butt pad, this replica PT-3 Classica stock is a fine addition to your Eastern Operator loadout.

This Folding and Sliding Stock is designed for AK Models that have the Skeleton Triangle Side-Folding Stock as standard, and is constructed to a great standard from Aluminium. It has a Thick Rubber Cheek Rest and Butt Pad, both of which can be adjusted for height, and the whole Stock can be made longer to suit all shapes and sizes of user.

Looking for one of the best PDW stocks on the market, both in form and function? The Krytac Trident PDW stock is what you've been searching for! This stock is constructed with steel stock bars and a steel locking mech to guarantee effective long term function and has a uniquely modern style that was until now exclusive to the Krytac Trident PDW AEG. This PDW stock is remarkably compact, with no wasted space whatsoever and enough room for a standard buffer tube type 7.4V LiPo 1300mAh stick battery with space to spare. If you are building a custom PDW AEG, the Krytac CSS2 PDW stock's compact and well thought out design makes it hard to beat!

A real wood furniture component kit, ideal for converting your L1A1 SLR from it's late 1970's era black Polymer furniture, to its original, iconic wooden hand guard, stock, pistol grip and carry handle.