Airsoft Mounts

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

An M-LOK to Harris-Style Bipod Lug Adapter for Airsoft replicas, particularly AR / M4 Platform Assault Rifles with an M-LOK Handguard, or M-LOK Style Sniper Rifles such as the Ares Striker or CM.708. If you want to mount a Bipod where you only have M-LOK Rail Slots, then this is exactly what you need.

If you are looking for a way to run your AK on a single point sling, this steel sling point from CYMA will give you what you need! The Steel Tactical Sling Mount attaches to your AK receiver and sits between the pistol grip and receiver itself, providing a sling loop on the left side of the rifle. This sling loop is ideally suited to hook type slings and single point bungee slings. 

A set of low profile alloy scope rings of 25mm diameter that attach to 20mm RIS/RAS rails. 

Having trouble getting a good view down your red dot sight when wearing full-face protection? A riser mount is what you need! This riser mount attaches to any 20mm Picatinny rail and provides a raised rail section approximately 4cm long, allowing a low-profile micro red dot sight to be far more visible when using facial protection, helmets and other headgear that might get in the way. The use of a riser mount has the added benefit that it gives you a greater ability to acquire your optic when shooting in unconventional positions and helps encourage a more upright and relaxed shooting stance.

A sight rail which is compatible with 20mm RIS, designed to bolt into place on the carry handles of M4 and M16 type Airsoft guns, allowing users to install optics onto their guns. 

Ideal for Airsofters wearing full-face masks, wide goggles or simply using a very low-profile optic, this 1"/2.5cm high raiser block allows users to increase the height of their 20mm RIS rail mounted accessories to a more usable position. 

A Low Profile Receiver Mount for SMG-5 and G3 Platform Airsoft Replicas, providing you with a medium length of 20mm RIS/RAS Rail on top of your Rifle, ideal for installing a Red Dot or Telescopic Sight. If you own one of these Airsoft Guns then a Receiver Mount is the only viable way to mount a Sight onto your replica. It is easy to install, needing only a couple of screws to be tightened up to hold it in place.

An Alloy constructed sling mount for KeyMod rail systems, which comes included with a QD sling loop ready for any basic-clasp sling.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

High quality scope mount designed for AK series including 74, ak14 and AKM. With a 20mm rail you can attach a range of sights from ACOGS to sniper scopes.

An Aluminium Alloy constructed Cantilever mount for 30mm Scopes, which easily mounts onto 20mm RIS/RAS Rail Systems. It offers two connection points with four securing screws in each mount. The base of the mount attaches to 20mm rails by unscrewing the securing nuts, placing onto the rail and re-tightening.

This red dot sight mount plate is compatible with the Ares SC-016 micro red dot sight and allows it to be mounted above the Ares SC-015 rifle scope in a "piggyback" manner. The plate is constructed from CNC machined aluminium and includes two mounting bolts and an Allen key.

If you want to shoot while you shoot, we suggest a sight mounted to your sight! The WADSN LPVO Mount Offset Optic Base is designed to mount to the WADSN LPVO 30mm Scope Mount and provide an instantly accessible red dot sight. This mount base is compatible with RMR, T1 and T2 style sights, and may also fit others. The mount is constructed from aluminium with steel screws, and comes with an Allen key and a Torx key so you don't have to rummage in your toolbox! 

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

If you are in need of a raised LPVO style dual ring mount, you're in luck! The WADSN LPVO 30mm Scope Mount is designed to accept any riflescope with a 30mm tube, and provides a slightly higher than normal mount position to aid those who use full-face protection and facilitate the most modern shooting stances. The mount is constructed from aluminium with steel mounting screws, and its design also offers the opportunity to mount a red dot sight on the side through the use of the LPVO Mount Offset Optic Base.