Airsoft Under £25

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

If you're into modern shooting techniques and running PTS EPM Gen.2 mid-caps, these should interest you! The PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack are genuine real steel magazine enhancements designed for real P-Mag Gen.2 AR-15 magazines but also compatible with PTS EPM Gen.2 mid-cap magazines. 

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight, the PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack is what you need!

FPS Softair brings you the Polymer Piston w/Steel Tooth Rack for Marui NGRS SCAR-L/H, featuring a technopolymer body and a full rack of steel teeth for a good combination of high strength and low weight.

The loaded technopolymer assures great mechanical resistance and dimensional precision. The tooth rack was manufactured through the use of MIM (Metal Injection Moulding) technology since this production process guarantees dimensional accuracy and sturdiness equal to those of solid machining.

The metal injected is SAE 4650 steel, currently considered the best for this type of use. The sliding guides are designed to minimize friction and hold the lubricant for a long period of time, so you can be safe in the knowledge that your TM NGRS SCAR will have reliable and long-lasting functionality.

If you need a high-quality magazine for your M4/AR-15 AEG, you are in luck! The Novritsch 225rnd Magazine is the gen.2 model of Novritsch M4 magazines and comes with some new refinements and improvements. It comes with a monopod baseplate, perfect for shooting from a prone position. It also has a number matrix on the bottom so you know which magazine you're using.

There is also a viewing window on the side of the magazine so you know when you're running short on BBs. The baseplate is also easily removable and the internal magazine can be removed for easy maintenance and cleaning. This magazine is the perfect choice for any skirmisher who is looking for a reliable and consistent performance!

An ultra low-profile and tough Flip Cap for Objective Lenses with an outside diameter of 50-59mm, which has 270° of motion so that your cover can sit vertically or sat back on the scope. This is the perfect way to protect your lens in style when your rifle is not in use or in transport/storage.

A rugged and flexible Eyepiece Lens Cover for Telescopic Scopes with an Eyepiece diameter between 41.5mm and 46mm (1.6-1.8"). It offers a dual position cap and weatherproof defence against the elements. Ideal for protecting your lenses during transport or storage.

A replacement for your Airsoft gun's standard flash hider, this compact 14mm CW threaded compensator is a small way to dramatically alter the appearance of your Airsoft gun. 

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

We put this pack together to serve those who run a tracer-equipped pistol in CQB and want to get all their consumables in one go, with a tasty discount as a bonus! 

If you have yourself one of the cutest backup pistols around, the Cyber Gun Colt Junior, you may want a spare mag to give you an even better chance in those last-ditch scenarios! The 7 rnd Colt Junior GBB Magazine from Cyber Gun is similarly laid out to a standard GBB magazine but miniaturised. The magazine can be loaded through the feed lips at the front, and the gas fill valve can be found on the magazine base plate. The left side of the magazine features a pull-down follower, making it easy to load BBs even without a speed loader.

If you are less of a loud and proud skirmisher and more of a low-profile and stealthy kind of player then you need to make sure your primary is also dressed for the part! The Novritsch Camo Cover - SSQ22 fits perfectly on the Novritsch SSQ22 rifle and is designed so that it doesn't interfere with any of the controls of the platform.

It helps to break up the highly recognisable outline of an Airsoft platform with its woodland colours and irregular shape. The Cover is constructed from Nylon fabric mesh, complete with 3D leaves to make it truly disappear in a natural environment. The cover mounts to your SSQ22 via Velcro straps and an adjustable bungee cord, allowing you to get a snug fit and keep the controls accessible regardless of your choice of mission essential accessories.

If you intend to defeat millions of years of evolved threat recognition instincts, getting ghillied up with the Novritsch Camo Cover - SSQ22 on your primary will give you your best shot at remaining invisible on the battlefield!

If you are less of a loud and proud skirmisher and more of a low-profile and stealthy kind of player then you need to make sure your primary is also dressed for the part! The Novritsch Camo Cover - SSQ22 fits perfectly on the Novritsch SSQ22 rifle and is designed so that it doesn't interfere with any of the controls of the platform.

It helps to break up the highly recognisable outline of an Airsoft platform with its woodland colours and irregular shape. The Cover is constructed from Nylon fabric mesh, complete with 3D leaves to make it truly disappear in a natural environment. The cover mounts to your SSQ22 via Velcro straps and an adjustable bungee cord, allowing you to get a snug fit and keep the controls accessible regardless of your choice of mission essential accessories.

If you intend to defeat millions of years of evolved threat recognition instincts, getting ghillied up with the Novritsch Camo Cover - SSQ22 on your primary will give you your best shot at remaining invisible on the battlefield!

If you are less of a loud and proud skirmisher and more of a low-profile and stealthy kind of player then you need to make sure your primary is also dressed for the part! The Novritsch Camo Cover - SSQ22 fits perfectly on the Novritsch SSQ22 rifle and is designed so that it doesn't interfere with any of the controls of the platform.

It helps to break up the highly recognisable outline of an Airsoft platform with its woodland colours and irregular shape. The Cover is constructed from Nylon fabric mesh, complete with 3D leaves to make it truly disappear in a natural environment. The cover mounts to your SSQ22 via Velcro straps and an adjustable bungee cord, allowing you to get a snug fit and keep the controls accessible regardless of your choice of mission essential accessories.

If you intend to defeat millions of years of evolved threat recognition instincts, getting ghillied up with the Novritsch Camo Cover - SSQ22 on your primary will give you your best shot at remaining invisible on the battlefield!

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

If you're looking for SAIGA-12 mags for your Double Bell SAIGA-12 AEG or want to give your AK a different look, the Double Bell 300rd Hi-Cap Magazine for SAIGA-12K AEG is what you need. This polymer high-capacity magazine holds approximately 300 BBs and is filled through the fill window at the top of the magazine body. Simply pop the fill window door open, pour your BBs in, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're good to go!

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction.

An Aluminium constructed folding rear iron sight for 20mm rails which is fully adjustable for windage and elevation.

If you are looking for an excellent replacement piston for your AEG then look no further! The RetroArms 14.5 Steel Tooth Piston is the perfect piston upgrade. Its injection moulded carbon-reinforced polymer ensures premium quality and consistency, the fourteen-and-a-half steel teeth are highly wear-resistant and greatly extend the lifespan, and it also keeps your Airsoft rifle performing up to standards. The half-tooth allows the piston to be picked up by the gears more easily and minimises the chance of the teeth bouncing off the gear and causing internal damage.

The RetroArms 14.5 Steel Tooth Piston is great for high-performance builds and is designed for version 2 and version 3 gearboxes. Make your AEG premium with this simple upgrade piece!

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

If you need a battery for your AR36 AEG or polymer handguard equipped M4/AR-15 AEG this one will do the trick! The 7.4v 1800mAh 20C LiPo Flat Nunchuck Battery from Electro River is a flat nunchuck style battery, also known as a "butterfly" configuration. Unlike other nunchuck batteries, this won't inside a crane stock and is more suitable for large polymer handguards such as those found on AR36 and M4A1 AEGs and will also fit nicely in most fixed rifle stocks.

The battery itself is a 2-cell 7.4V LiPo with a wire length of approximately 9cm between the cell groups and the connector, and each of the two cell groups measures 10 x 0.6 x 3.5cm approximately. The pre-wired connector is the common mini-Tamiya type and the continuous discharge rate is 20C, with a maximum discharge rate of 40C.

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

If you are having trigger issues with your ARCTURUS M4/AR15 AEG this replacement original part set should cure it! The ARCTURUS Microswitch V2 for ARCTURUS AEG series includes the microswitch itself, a Deans/T-plug battery connector and spade connectors all wired together for a relatively simple installation procedure. The set should not require soldering to install, but as always, we recommend a certain level of confidence and expertise if you plan on installing this part.

Fixed up your faulty platform and get it back on the battlefield in no time!

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

If you want to make your AK a little more... AK. Then the LCT AK104 Flash Hider is for you! This flash hider is a replica of the real steel AK104 trumpet-style flash hider. It attaches to 24mm CW threading and is constructed from steel, giving it a hefty weight and a realistic feel. It has a wear-resistant finish and its sturdy construction ensures that it will survive more than its fair share of skirmish-related bumps.

To fit this flash hider on more common threads you will need a 24mm to 14mm thread adapter. Give your AK the classic look with a real steel-styled flash hider and keep your AK in the 20th century, right where it belongs.

The Shadow Foam Hot Foam Smoother is similar to a soldering iron and is perfect for adding some final smoothing touches or creating some personalised designs such as engraving your name into your Shadow Foam. It includes three different tips, a circular tip, a pointed tip and a leaf tip. These are extremely useful for brushing over bumps and removing foam fluff.

The product also includes a stand for your tool, so you do not have to risk burning your table whilst using this tool. Remember to operate this tool safely, it gets extremely hot and the correct safety procedures must be followed whilst using it.