All Two-Tone Airsoft Guns

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If your pistol tastes dictate the elite look, the Delta Armory P02 EU17 Gas Blowback Pistol belongs on your belt! This full metal EU-series GBB pistol is uniquely stylish, designed to imitate real-world customised pistols designed for tactical and competitive shooting. The P02 boasts Delta's unique imitation hand-stippled frame and a super-slick SAI style slide, mimicking the "Tier One" pistol, one of the trendsetters in the world of custom EU-series pistols.

The P02 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you prefer a pistol which telegraphs its customised nature discretely, the Delta Armory P02 EU17 Gas Blowback Pistol is the one for you. Supplied in a polymer hard pistol case with wave foam internals, the P02 is professional and sporty in equal measure!

If your pistol tastes dictate the elite look, the Delta Armory P02 EU17 Gas Blowback Pistol belongs on your belt! This full metal EU-series GBB pistol is uniquely stylish, designed to imitate real-world customised pistols designed for tactical and competitive shooting. The P02 boasts Delta's unique imitation hand-stippled frame and a super-slick SAI style slide, mimicking the "Tier One" pistol, one of the trendsetters in the world of custom EU-series pistols.

The P02 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you prefer a pistol which telegraphs its customised nature discretely, the Delta Armory P02 EU17 Gas Blowback Pistol is the one for you. Supplied in a polymer hard pistol case with wave foam internals, the P02 is professional and sporty in equal measure!

If you've decided on an EU series sidearm but need something a step above the basic options, the Delta Armory P03 Hive EU17 Gas Blowback Pistol should be in your sights. This full metal EU17 platform is internally based on the Tokyo Marui design but rocking a full external style-up with hexagonal slide serrations, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, giving it a look akin to high-end custom pistols popular in the United States without the painful price!

Adding to its mission-ready features, the P03 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure.

If you like the custom pistol aesthetic but aren't a fan of ported slides, the Delta Armory P03 EU17 Gas Blowback Pistol should suit you perfectly. With no speed holes but plenty of speedy styling, this is the sidearm for the practical-minded skirmisher not afraid to stand out!

If you've decided on an EU series sidearm but need something a step above the basic options, the Delta Armory P03 Hive EU17 Gas Blowback Pistol should be in your sights. This full metal EU17 platform is internally based on the Tokyo Marui design but rocking a full external style-up with hexagonal slide serrations, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, giving it a look akin to high-end custom pistols popular in the United States without the painful price!

Adding to its mission-ready features, the P03 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure.

If you like the custom pistol aesthetic but aren't a fan of ported slides, the Delta Armory P03 EU17 Gas Blowback Pistol should suit you perfectly. With no speed holes but plenty of speedy styling, this is the sidearm for the practical-minded skirmisher not afraid to stand out!

If you've decided on an EU series sidearm but need something a step above the basic options, the Delta Armory P03 Hive EU17 Gas Blowback Pistol should be in your sights. This full metal EU17 platform is internally based on the Tokyo Marui design but rocking a full external style-up with hexagonal slide serrations, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, giving it a look akin to high-end custom pistols popular in the United States without the painful price!

Adding to its mission-ready features, the P03 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure.

If you like the custom pistol aesthetic but aren't a fan of ported slides, the Delta Armory P03 EU17 Gas Blowback Pistol should suit you perfectly. With no speed holes but plenty of speedy styling, this is the sidearm for the practical-minded skirmisher not afraid to stand out!

If you prefer shorter AR platforms and want something full metal with a programmable MOSFET, the Delta Armory DA-A13-EGL ALPHA™ 8" M-LOK M4/AR-15 AEG is one of the best options out there. Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

Inside, we're also remarkably well-equipped! Inside, we have a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. Also present inside is the Delta Armory EAGLE™ programmable MOSFET/ETU, a serious game changer!

With the EAGLE™ ETU, you can program the fire controls for burst modes of various durations, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking using only the trigger and fire selector of the gun itself. The result is an incredibly advanced M4 AEG with almost unlimited flexibility via the advanced EAGLE™ ETU and full compatibility with aftermarket upgrades for those who want more. If you like your ARs as cutting edge on the inside as they are externally, the Delta Armory DA-A13-EGL ALPHA™ 8" M-LOK M4/AR-15 AEG should suit you perfectly!

If you are in the mood for an AK but you want one from this century, an AK-12 is the AK for you. The Double Bell AK-12 is the most affordable AK-12 replica yet released, boasting full metal construction with a high proportion of steel parts, a 6.03mm tightbore inner barrel, quick change spring equipped version 3 gearbox and steel gears running on 8mm ball bearing bushings.

Double Bell's AK-12 offering differs from previous AK-12s in that it is more closely based on a standard AK, with an easy access battery compartment beneath the hinged top cover, a standard AK fire selector switch instead of the extended type and a standard AK receiver with authentic stamped Cyrillic selector markings. While this isn't 100% purebred AK-12, it gives you the silhouette of the most modern Russian service rifle and its plethora of accessory rails for a more affordable price and without compromise when it comes to build materials. If you want the heft, majority steel build and sheer presence of an AK platform without the difficulties mounting accessories, the Double Bell AK-12 will do the trick!

The Type 870 Series just got a tacti-cool update in the form of a KeyMod Pump Handle, Handstop, Unique Stock Assembly and a Full-Length Top 20mm Rail. Amazingly crafted, with a Full Metal external construction aside from a Polymer Pistol Grip, this is one of the most realistic Airsoft Shotguns out there at the moment.

Lee Enfield fans have had a great year...just like busses, you wait forever for a nice Lee Enfield replica and 3 arrive within the space of 6 months! The G&G LE4 MK1-P is G&G's Enfield offering, and differs from the others in its green gas power source, allowing more precise dimensional accuracy and heightened realism when compared to springers.

The G&G Lee Enfield is a truly innovative platform, feeding from 30rnd stripper clip style magazines (we like to call them "clipazines") with its gas tank inside the stock, making it far more skirmish capable than other gas bolt actions, and beating the springers with its smooth and fast bolt action with a realistically sized bolt. When your clipazine runs dry it pops up to allow for a quick reload, and the LE4 comes with 3 clipazines included. If you want the most realistic Enfield skirmish experience, this is the one to go for!

If you seek a compact, full metal M4 platform with a realistic build and licenced trademarks, the EMG Noveske 7.5" Gen.3 DIPLOMAT AEG should be in your crosshairs. A CQB-optimised alternative to the carbine length Noveske INFIDEL, the DIPLOMAT boasts an intimidatingly loud muzzle report thanks to its pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal parts thanks to the OEM, CYMA Platinum. 

Internally, the DIPLOMAT is kitted out with the impressive CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. 

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barreled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

If you seek a compact, full metal M4 platform with a realistic build and licenced trademarks, the EMG Noveske 7.5" Gen.3 DIPLOMAT AEG should be in your crosshairs. A CQB-optimised alternative to the carbine length Noveske INFIDEL, the DIPLOMAT boasts an intimidatingly loud muzzle report thanks to its pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal parts thanks to the OEM, CYMA Platinum. 

Internally, the DIPLOMAT is kitted out with the impressive CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. 

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barreled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

If you seek a compact, full metal M4 platform with a realistic build and licenced trademarks, the EMG Noveske 7.5" Gen.3 DIPLOMAT AEG should be in your crosshairs. A CQB-optimised alternative to the carbine length Noveske INFIDEL, the DIPLOMAT boasts an intimidatingly loud muzzle report thanks to its pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal parts thanks to the OEM, CYMA Platinum. 

Internally, the DIPLOMAT is kitted out with the impressive CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. 

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barreled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

Another extremely well-equipped pre-upgraded sniper rifle hits the market, but this one is different. The ASG Steyr Mannlicher Scout rifle is based on the real-world design, the brainchild of legendary rifle designer Jeff Cooper. This rifle provides everything you need to snipe with the utmost efficiency. An unusual looking beast, the Steyr Scout is designed by the best, and I have to say, the Airsoft version lives up to my every expectation of this phenomenal platform...

If you seek realism and want to challenge yourself in game, the EMG Noveske N4 "Ghetto Blaster" 10.5" MWS ZET System GBBR will scratch that itch! This Gas Blowback Rifle boasts full metal construction, licensed Noveske trademarks and some incredible internals modelled from the best when it comes to GBBRs; the Tokyo Marui ZET system.

This rifle is definitely a step up from a battery-powered M4! A GBBR provides unparalleled realism with its realistic operations such as loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While it may seem like a lot to learn and get used to, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licensed by Noveske through EMG and manufactured by Double Eagle, the "Ghetto Blaster" has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks. It also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR up and running.

If you seek realism and want to challenge yourself in game, the EMG Noveske N4 "Ghetto Blaster" 10.5" MWS ZET System GBBR will scratch that itch! This Gas Blowback Rifle boasts full metal construction, licensed Noveske trademarks and some incredible internals modelled from the best when it comes to GBBRs; the Tokyo Marui ZET system.

This rifle is definitely a step up from a battery-powered M4! A GBBR provides unparalleled realism with its realistic operations such as loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While it may seem like a lot to learn and get used to, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licensed by Noveske through EMG and manufactured by Double Eagle, the "Ghetto Blaster" has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks. It also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR up and running.

If you seek realism and want to challenge yourself in game, the EMG Noveske N4 "Ghetto Blaster" 10.5" MWS ZET System GBBR will scratch that itch! This Gas Blowback Rifle boasts full metal construction, licensed Noveske trademarks and some incredible internals modelled from the best when it comes to GBBRs; the Tokyo Marui ZET system.

This rifle is definitely a step up from a battery-powered M4! A GBBR provides unparalleled realism with its realistic operations such as loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While it may seem like a lot to learn and get used to, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licensed by Noveske through EMG and manufactured by Double Eagle, the "Ghetto Blaster" has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks. It also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR up and running.

If you seek realism and want to challenge yourself in game, the EMG Noveske N4 "Ghetto Blaster" 10.5" MWS ZET System GBBR will scratch that itch! This Gas Blowback Rifle boasts full metal construction, licensed Noveske trademarks and some incredible internals modelled from the best when it comes to GBBRs; the Tokyo Marui ZET system.

This rifle is definitely a step up from a battery-powered M4! A GBBR provides unparalleled realism with its realistic operations such as loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While it may seem like a lot to learn and get used to, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licensed by Noveske through EMG and manufactured by Double Eagle, the "Ghetto Blaster" has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks. It also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR up and running.

A compact version of an instantly recognisable classic; the M60E4 "Pig". This tactical variant of the LMG was designed to bring hard-hitting firepower to battlefields where a large unwieldy Support Weapon would be impractical. As you would imagine, it's built like a tank and has excellent quality of life features such as an electronic trigger and rate of fire adjuster.

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

The Double Eagle M58B is a Spring Powered Pump Action Shotgun with a Single Barrel, meaning that it can fire BBs with more power and accuracy than its' Tri-Burst equivalents.

The Double Eagle M58B is a Spring Powered Pump Action Shotgun with a Single Barrel, meaning that it can fire BBs with more power and accuracy than its' Tri-Burst equivalents.

If you've set your sights on a sniper rifle but don't want to break the bank, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is a fantastic option! Based on the original MB03, a close copy of the TM VSR-10, the AE version is upgraded on the inside with a 6.03mm tightbore inner barrel, a steel spring guide, 90-degree piston/trigger sear set and reinforced steel parts throughout the trigger group.

This makes the MB03AE robust enough internally to handle higher power springs, though the pre-installed APS-2 spec mainspring puts out an impressive 412 FPS approximately with 0.2g BBs. Externally, the MB03AE is simple and functional, equipped with a 20mm Picatinny receiver rail for your scope, front and rear sling points and a 20mm Picatinny bipod rail on the bottom, ready to be kitted out sniper rifle style. A spiral-fluted aluminium outer barrel adds a bit of visual interest and style to make it stand out next to the original MB03 and the reprofiled bolt handle ensures you don't scrape your knuckles on your optic when working the bolt.

As far as entry-level sniper rifles go, the MB03AE is a cut above the rest and boasts a fantastic quality polymer stock with a textured finish, indicating fibre reinforcement. If you want to sample Airsoft sniping without getting in too deep financially, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is the perfect thing!

A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more. 

If you're put off full metal SMG-5s because of their immense weight, this high density polymer alternative should suit you perfectly! The Golden Eagle SMG-5 A5 RAS replicates the iconic SMG design in its RAS configuration, with 20mm Picatinny rails at 3, 6 and 9 o'clock on the handguard, ready for your mission essential accessories. Up front, we have a QD flash hider mounted to a threaded tri-lug muzzle device, giving you loads of tracer and suppressor mounting options straight out of the box.

On the inside, the G.E SMG-5 is modestly equipped but surprisingly potent for the price. The internals are based around the Tokyo Marui SMG-5, meaning a version 2 gearbox, slider adjustable HOP-up unit and full compatibility with aftermarket TM spec upgrade parts. Improving on the original TM design,Golden Eagle has added 7mm ball bearing bushings into the mix for reduced friction, increased rate of fire and a smoother gearbox report. Another nice little sweetener is the platform's 6.03mm tightbore inner barrel which raises FPS and improves accuracy, saving you a few quid when it comes time to upgrade!

This BO Dynamics DIAMONDBACK DB15 AP306 7" M4/AR-15 AEG is compact and lightweight, it is constructed from a high-density, lightweight polymer and is scratch-resistant, great for newcomers who are still trying to get to grips with the skirmish lifestyle. It also features a Helios suppressor or compensator so you can find your favourite look or gameplay style. This package also includes an 11.1V crane battery, a balance charger, tools and 2x 20mm Picatinny rail sections. This is a brilliant deal for newer players as it includes everything they need to shoot this AEG straight out of the box!

This rifle is also equipped with a MOSFET that allows for programmable firing modes, this is an amazing feature for the relatively low price and gives beginner players a chance to experiment with different firing modes, additionally, the MOSFET will also protect your rifle from short circuits and burnouts.

If you're a fan of staying swift, sneaking around the battlefield and surprising unsuspecting foes, then the BO Dynamics DIAMONDBACK DB15 AP306 7" M4/AR-15 AEG is perfect for you!

An Airsoft 6mm BB Gun, designed in a bullpup configuration, based off the Austrian Steyr AUG. The gun features an Alloy Front end, and Sight with Polymer Body and Foregrip.

If you prefer the old days when real men carried full-length rifles, you'll definitely be into the Specna Arms SA-B06 ONE™ M16A4 AEG! This full metal M4/AR-15 platform is based around Specna's original ONE™ series M16A4 but now comes equipped with the Kestrel Basic ETU, a programmable MOSFET which is far more advanced than its moniker "Basic" suggests!

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 509mm 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M16A4 AEGs on the market!

Whether you're working on a GWOT-era USMC loadout or you prefer the iconic M16 silhouette to its prolific shorter sibling, the Specna Arms SA-B06 ONE™ M16A4 AEG; Kestrel Basic ETU is the big M4 you need!

If you love your Russian platforms but are not stuck in the past, the CYMA CM.039C AK-47 Tactical AEG Rifle should definitely interest you. This beast is constructed using a lot of steel components to help provide an extremely realistic weight. It comes equipped with a foldable foregrip, so you can take down your opponents with precise handling whilst on the battlefield.

Inside, you'll find a 6.03mm tightbore inner barrel which provides some extra power and accuracy when sending BBs down range. The gearbox is a version 3 fitted with 18:1 steel gears running on 8mm ball bearing bushings, a tried and trusted formula guaranteeing consistency. If you're searching for an ultra-modern tactical AK replica to live out your tactical fantasies, the CYMA CM.039C AK-47 Tactical AEG Rifle is one to watch!

If you are stuck between an upgraded pistol or a GBB SMG for CQB or sniper backup duty, why not get both in one? The APS Black Hornet Plus GBB SMG is a complete set including a unique upgraded EU18 style GBB pistol, an APS carbine kit and a proper laundry list of accessories so you can run it either as a fully decked-out SMG or a suppressed pistol at your leisure.

This kit represents great value when you consider the plethora of accessories and options included. The heart of this beast, whether you run it in the carbine kit or as a suppressed pistol is its extended 47rnd CO2 magazine and 165mm 6.03mm steel tightbore inner barrel giving it the power, gas efficiency, cold resistance and range to outdo practically anything its size. If you struggle to choose between a GBB pistol and SMG, now you don't have to!