Full Metal Airsoft Guns

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you are looking for a cheap base gun for your dream sniper rifle build, this is ideal! The CYMA CM.701 Spring Bolt Action Sniper rifle is based on the popular R700 series of real steel bolt action rifles on the outside and is a clone of the Tokyo Marui VSR-10 Pro on the inside. The outer barrel and receiver are constructed from alloy and the stock is textured high density polymer, matching the metal proportions of the real thing perfectly.

On the inside, CYMA has generously added a 6.03mm tightbore inner barrel into the mix for improvements in accuracy and a slight FPS boost. Also present is a far stronger spring than in the Tokyo Marui version, the result of which is 500 FPS straight out of the box on a 0.2g BB. If you are building a beast of a sniper rifle, this would be a great start, just don't forget you will need an aftermarket 20mm Picatinny rail if you want to mount a scope!

A certified hand cannon in Airsoft form! This iconic beast of a pistol is fully licensed from Dan Wesson for maximum realism as well as making for a great skirmish weapon. 

Created by ASG with their brand new design, this gas non-blowback CO2 revolver if for those of you who want something a little more chunky in the palm when the enemy is in your sights!

A certified hand cannon in Airsoft form! This iconic beast of a pistol is fully licensed from Dan Wesson for maximum realism as well as making for a great skirmish weapon. 

Created by ASG with their brand new design, this gas non-blowback CO2 revolver if for those of you who want something a little more chunky in the palm when the enemy is in your sights!

If you're into historical platforms and seek the most realistic experience, check out the S&T PPSh-41 EBB Submachine AEG; Real Wood! This beast boasts full metal construction and a gorgeous real wood stock, making use of a high proportion of steel in the build for an authentically hefty feel in the hands and a truly realistic experience. The iconic PPSh-41 silhouette is completed with the included drum magazine which is constructed from steel and holds an incredible 2000 BBs. While this PPSh-41 is compatible with both stick and drum magazines from S&T, the included drum is probably enough!

To make matters all the sweeter, the S&T PPSh-41 has an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG. 

Inside the unique gearbox shell we have 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you're in search of a WW2-era Ruskie replica well suited to a highly mobile playstyle, the S&T PPSh-41 EBB Submachine AEG; Real Wood is a fine choice!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

Those in search of a modern AR with a long range leaning, check this out! The DA-A15-ETU ALPHA™ 13" M-LOK M4/AR-15 from Delta Armory brings the cutting-edge styling of the slickest real steel M4s out there along with pre-upgraded internals pushed to the max, making it a serious foe to face down with in an outdoors environment.

As with the other ALPHA™ line AEGs from Delta, the DA-A15-ETU boasts full metal construction with flawless machining throughout, but unlike standard ALPHA™ AEGs, this one is the ETU version. Delta's ETU AEGs are even more upgraded than the standard ALPHA™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. Whether you are going full DMR with this build or using it as it comes, you are very well equipped for long range warfare with the DA-A15-ETU!

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

If you're searching for a top-tier primary you'll never need to upgrade, get eyes on the Novritsch SSR4 Mk2 M4/AR-15 AEG! This is the latest iteration of the SSR4, boasting a fresh new look with its unique receiver, handguard and muzzle brake design with all the best bits from the original game-changing SSR4 platform.

Inside, you'll find CNC steel 16:1 gears, a 30K high-torque motor, CNC aluminium compression parts and a 6.03mm tightbore inner barrel paired with a rotary TDC HOP-up unit, just like the original. What's changed? The Mk2 boasts a super-strong reinforced gearbox shell and modular adjustable trigger system, resulting in a longer lifespan and more customization options than ever before!

On the outside, a lot has changed, including a new magnetic dust cover for more convenient HOP-up adjustment, a new buffer tube mount design which allows for easier access to the quick change spring system, not to mention the exterior design which leans into the Novritsch aesthetic with its dynamic swept back handguard and muzzle brake design. If you're after an M4/AR-15 platform with proven internals designed for pure skirmish performance and packed with user-friendly features, the Novritsch SSR4 Mk2 M4/AR-15 AEG is the one!

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA MOSFET Edition line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a type 1 cylinder and a polymer piston with a full steel tooth rack. Tying this selection of high-end internals together is the CYMA Zeus MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're sick to death of M4/AR-15 AEGs, who can blame you? The Novritsch SSR77 A2 AUG AEG is a breath of fresh air, based on the old-school-cool AUG design with modern attachment interfaces and pre-upgraded internals throughout, ideal for the skirmisher who wants a unique primary platform with performance to match the latest M4 AEGs to hit the market.

On the outside, the SSR77 A2 is dressed to impress, boasting a unique CNC aluminium M-LOK handguard, reduced profile upper 20mm Picatinny rail and a pair of QD sling sockets on each side, ready to be decked out like the most cutting edge M4s. Inside, things are even more impressive! This is one of the first AUG replicas to hit the market with a programmable MOSFET pre-installed, meaning SSR77 owners can join the SSR4, UTR45 and Gate TITAN owners enjoying burst mode, binary trigger and several levels of pre-cocking adjustment. If you've ever mourned that all the sick technology is in M4 replicas, the SSR77 A2 AUG AEG should put a smile back on your face!

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

Whether you are new to the sport or a veteran looking for something a bit different, the VORSK EU18 Vented Slide GBB Pistol; Metallic Edition definitely stands out! Boasting full metal construction and a striking metallic finish on the slide, flared magazine well and trim parts, this is the same proven VORSK EU18 Vented Slide dressed in its Sunday finest.

This means we are treated to a 6.03mm tightbore inner barrel for improved accuracy potential and a steel slide stop for extra strength on a known high-wear part, along with a full complement of external upgrades, tracer compatibility and more. If your sidearm tastes demand an imposing and dazzling piece, the VORSK EU18 Vented Slide Metallic Edition should suit your style!

Whether you are new to the sport or a veteran looking for something a bit different, the VORSK EU18 Vented Slide GBB Pistol; Metallic Edition definitely stands out! Boasting full metal construction and a striking metallic finish on the slide, flared magazine well and trim parts, this is the same proven VORSK EU18 Vented Slide dressed in its Sunday finest.

This means we are treated to a 6.03mm tightbore inner barrel for improved accuracy potential and a steel slide stop for extra strength on a known high-wear part, along with a full complement of external upgrades, tracer compatibility and more. If your sidearm tastes demand an imposing and dazzling piece, the VORSK EU18 Vented Slide Metallic Edition should suit your style!

An absolute classic, still in use today by a whole host of countries for both service and recreational shooting, now as an Airsoft pistol!

The brilliant blue slide, gives this EU18C a striking and, but more importantly, it requires no UKARA to purchase and with it being factory painted you can get straight into the action and start skirmishing ASAP.

A reliable gas blowback pistol, with lightweight polymer frame and tough alloy slide, with both semi and fully automatic functions, this is a go-to tried-and-true pistol for many Airsofters.

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you are having a tough time deciding between all the modern handgun designs out there, and you aren't sure whether to go for a PPQ, M&P or Glock, now you no longer need to decide! The CANiK TP9 is a very recent handgun designed in Turkey and manufactured in the USA which takes the things people love about other platforms and combines them to make one of the most ergonomically pleasing pistols we have ever handled. To sweeten the deal, the EMG TP9 Elite Combat comes with a 14mm CCW male threaded outer barrel, a magazine well flare and a 20mm Picatinny frame rail, meaning the TP9 is ready for any battlefield role you have in mind! 

If you're looking for a compact AR platform with more than its fair share of perks, look no further than the Delta Armory DA-A13-ETU ALPHA™. This AEG is at the very top of Delta Armory's range, boasting the full metal external build of the ALPHA™ series paired with the ETU series internals, resulting in a beast of a platform, both inside and out.

Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip based on the gunfighter mod.3 grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

The news is similarly impressive inside! The version 2 gearbox has a reinforced shell, CNC aluminium piston and cylinder heads, CNC steel 16:1 gears running on 7mm bushings and a high torque neodymium magnet motor to deliver the torque needed for a lightning-fast trigger response. The barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, granting this compact PDW-esque AR surprising long range performance. A programmable ETU/MOSFET system improves electrical efficiency and allows for burst mode, binary trigger and pre-cocking to be programmed in using the fire controls of the AEG itself. If you don't want the fuss, troubleshooting and tuning that comes with upgrading your own beast of an AEG, no need to put yourself through that, Delta Armory has done it for you!

If you're looking for a DMR style build ready for locking to semi with a quick change spring system, this bundle is for you! We paired Delta Armory's 14" R15 FREYA™ Gen.2 with their superb 1.5-5X40BE LPVO scope with mount and the Swiss Arms QD Suppressor! A couple of extra mags, a bag of BBs and a speed loader are also included in this bundle to get you going.

This thing looks the business, a proper modern DMR/SPR build, but also gives the option to lock the R15 FREYA™ to semi-auto only, switch out the spring and make it a proper DMR! If you had a DMR build planned, why not save a few quid with the DMR Dominator Bundle?

Whether you're curious about the speedsoft playstyle or seek a reliable, proven and efficient platform as your first sidearm, the Action Army AAP-01 Assassin GBB Pistol; Pre Two-Tone Blue is at the head of the pack. Boasting an astonishing full-auto fire rate and a snappy semi-auto trigger response, the AAP is all about performance; designed for maximum efficiency and packing a 6.03mm tightbore inner barrel to keep you competitive in game.

One of the major perks of choosing the AAP-01 over comparable affordable sidearms is its vast aftermarket parts range; offering everything from carbine kits through 20mm rails to stylish receivers and frames, allowing you to build it out to make it truly yours. As it comes, the AAP-01 is rocking a set of brilliant light-enhancing iron sights designed for fast target acquisition and a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor.

Compatible with common EU-series magazines and equipped with ambidextrous controls, the AAP-01 is easy to master, affordable to run and a fantastic shooter, especially when put side by side with conventionally laid out pistols in a high-intensity CQB scenario. If your sidearm needs prioritise performance, customisation options and cost-effectiveness, you won't find anything better than the Action Army AAP-01 Assassin GBB Pistol; Pre Two-Tone Blue!

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

If you like your sidearms to stand out, the VORSK EU18 Solid Slide GBB Pistol; Metallic Edition sure does! This is the proven VORSK EU18 Solid slide we have all seen before but treated to a gorgeous metallic finish on its slide and trim parts, setting it apart from the usual boring black EU series pistols and allowing those without UKARA to get it right away!

Like the other VORSK EU series offerings, the EU18 Solid Slide Metallic Edition boasts full metal construction, a 6.03mm tightbore inner barrel and a full compliment of upgraded externals, including a pre-installed thread adapter, flared magazine well and an enhanced frame with comfortable faux-stippling texture. Available in a range of metallic colour options including red, purple and V-blue; if a sidearm with a side of style is on the menu, the VORSK EU18 Solid Slide Metallic Edition should suit your tastes!

If you like your sidearms to stand out, the VORSK EU18 Solid Slide GBB Pistol; Metallic Edition sure does! This is the proven VORSK EU18 Solid slide we have all seen before but treated to a gorgeous metallic finish on its slide and trim parts, setting it apart from the usual boring black EU series pistols and allowing those without UKARA to get it right away!

Like the other VORSK EU series offerings, the EU18 Solid Slide Metallic Edition boasts full metal construction, a 6.03mm tightbore inner barrel and a full compliment of upgraded externals, including a pre-installed thread adapter, flared magazine well and an enhanced frame with comfortable faux-stippling texture. Available in a range of metallic colour options including red, purple and V-blue; if a sidearm with a side of style is on the menu, the VORSK EU18 Solid Slide Metallic Edition should suit your tastes!