Airsoft Guns Above £300

If you love a bit of unique old-school cool, the Bolster Tuned CYMA CM.058 PP-19 Bizon SMG AEG should be in your sights! Based on the CYMA CM.058 Bizon, this rare Russian SMG replica is a sight to behold with its distinctive cylindrical magazine, side-folding skeleton stock and menacing trumpet flash hider, but inside, things get even better!

Like the more conventional Bolster Tuned CM.113 AKS-74U, the Bizon is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings to keep it running reliably long term. Replacing the copper trigger contacts, we have the space-aged Gate ASTER II™ ETU, the ASTER II boasts several quality of life improvements, more customisation options than ever before and Bluetooth 5.2 connectivity built-in, allowing you to change settings wirelessly on your smartphone or mobile device.

The HOP-up has been enhanced with a Prometheus Purple Hop Rubber With Nub  to extend the range out to 60 meters and beyond with astonishing accuracy. To give it the insane rate of fire Bolster Tuned AEGs are known for, the team fitted CYMA Platinum 13:1 CNC High-speed gears, and the result is an incredible 27 rounds per second. A Guarder Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and the sub-par stock piston head O-ring has been replaced with the Bolster Armouries Enhanced Piston Head O-Ring to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put into refining the mass-produced CYMA gearbox and making it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts. The bearing holes have also been smoothed out to reduce friction and prolong lifespan. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.058, precisely what a proper PP-19 Bizon replica needs!

A respectable AEG in its original form, the CM.058 really shines with some expert custom fitting and choice upgraded parts. If you always fancied running a perfectly tuned SMG with a head-turning look, the Bolster Tuned CYMA CM.058 PP-19 Bizon SMG AEG ticks all the boxes!

If you need a super-sleek Premium sidearm with all the bells and whistles, the Patrol Base X PTS Sig Air P320 X-Carry GBB Pistol w/ PTS Killer Innovations Slide Kit is exactly that! A marriage between the Sig Air P320 X-Carry GBB Pistol and PTS's absolutely incredible Killer Innovations Velocity Defense V1 Conversion Kit, this custom-built P320 cycles at an incredible pace, with a flawless feel and a Maple Leaf MR HOP pre-installed for impressive long-range effect on target.

On the outside, this P320 X-Carry is dressed in its absolute finest, rocking a flawlessly replicated Velocity Defense Compensator which dominates the front end with an aggressive, high-speed edge. The Velocity Defense V1 Slide boasts dynamic slide ports to reduce weight, flawless engraved trademarks, angled slide serrations and optics-ready functionality, with an RMR footprint red dot mount plate and steel suppressor-height iron sights, ideal for co-witnessing.

If you ever want to change things up and run a tracer unit or suppressor, you'll be happy to learn that the fluted Velocity Defense outer barrel features common 14mm CCW male threading at the tip, allowing the gorgeous comp to be swapped out for a muzzle device of your choice.

With parts professionally installed by our talented head technician, including the smoothing of the internal frame rails of the base P320 and reapplication of high-quality Perfect Airsoft-branded lubricant for super-slick cycling, the Velocity X-Carry pre-build will save you a fair amount of hassle and time compared to carrying out the installation yourself, not to mention keeping your 12-month warranty intact, and the included PARRA Quokka Premium Pistol Case with pre-picked PNP foam. If you're ready to move up to the Premium side of Airsoft, the Patrol Base X PTS Sig Air P320 X-Carry GBB Pistol w/ PTS Killer Innovations Slide Kit is ready for you!

If you need a super-sleek Premium sidearm with all the bells and whistles, the Patrol Base X PTS Sig Air P320 X-Carry GBB Pistol w/ PTS Killer Innovations Slide Kit is exactly that! A marriage between the Sig Air P320 X-Carry GBB Pistol and PTS's absolutely incredible Killer Innovations Velocity Defense V1 Conversion Kit, this custom-built P320 cycles at an incredible pace, with a flawless feel and a Maple Leaf MR HOP pre-installed for impressive long-range effect on target.

On the outside, this P320 X-Carry is dressed in its absolute finest, rocking a flawlessly replicated Velocity Defense Compensator which dominates the front end with an aggressive, high-speed edge. The Velocity Defense V1 Slide boasts dynamic slide ports to reduce weight, flawless engraved trademarks, angled slide serrations and optics-ready functionality, with an RMR footprint red dot mount plate and steel suppressor-height iron sights, ideal for co-witnessing.

If you ever want to change things up and run a tracer unit or suppressor, you'll be happy to learn that the fluted Velocity Defense outer barrel features common 14mm CCW male threading at the tip, allowing the gorgeous comp to be swapped out for a muzzle device of your choice.

With parts professionally installed by our talented head technician, including the smoothing of the internal frame rails of the base P320 and reapplication of high-quality Perfect Airsoft-branded lubricant for super-slick cycling, the Velocity X-Carry pre-build will save you a fair amount of hassle and time compared to carrying out the installation yourself, not to mention keeping your 12-month warranty intact, and the included PARRA Quokka Premium Pistol Case with pre-picked PNP foam. If you're ready to move up to the Premium side of Airsoft, the Patrol Base X PTS Sig Air P320 X-Carry GBB Pistol w/ PTS Killer Innovations Slide Kit is ready for you!

If you need a super-sleek Premium sidearm with all the bells and whistles, the Patrol Base X PTS Sig Air P320 X-Carry GBB Pistol w/ PTS Killer Innovations Slide Kit is exactly that! A marriage between the Sig Air P320 X-Carry GBB Pistol and PTS's absolutely incredible Killer Innovations Velocity Defense V1 Conversion Kit, this custom-built P320 cycles at an incredible pace, with a flawless feel and a Maple Leaf MR HOP pre-installed for impressive long-range effect on target.

On the outside, this P320 X-Carry is dressed in its absolute finest, rocking a flawlessly replicated Velocity Defense Compensator which dominates the front end with an aggressive, high-speed edge. The Velocity Defense V1 Slide boasts dynamic slide ports to reduce weight, flawless engraved trademarks, angled slide serrations and optics-ready functionality, with an RMR footprint red dot mount plate and steel suppressor-height iron sights, ideal for co-witnessing.

If you ever want to change things up and run a tracer unit or suppressor, you'll be happy to learn that the fluted Velocity Defense outer barrel features common 14mm CCW male threading at the tip, allowing the gorgeous comp to be swapped out for a muzzle device of your choice.

With parts professionally installed by our talented head technician, including the smoothing of the internal frame rails of the base P320 and reapplication of high-quality Perfect Airsoft-branded lubricant for super-slick cycling, the Velocity X-Carry pre-build will save you a fair amount of hassle and time compared to carrying out the installation yourself, not to mention keeping your 12-month warranty intact, and the included PARRA Quokka Premium Pistol Case with pre-picked PNP foam. If you're ready to move up to the Premium side of Airsoft, the Patrol Base X PTS Sig Air P320 X-Carry GBB Pistol w/ PTS Killer Innovations Slide Kit is ready for you!

Introducing the VULKAN Advanced AK AEG, Bolster Armouries first AK platform. Built to the same exacting standards as previously released ONYX, ARKOSE, ATLAS and ONYX [Blackout] platforms with a development period far longer than intended, the VULKAN performs to perfection and boasts the finest external parts available on the AK aftermarket; a perfect blend of rugged Eastern utilitarianism and luxurious Western ergonomics.

Based on the LCT LCK104 AEG with little of the original platform remaining, the VULKAN is dressed to impress with an authentic Magpul Zhukov-U Handguard paired with an MOE® AR-15 Stock, offering a highly functional marriage of sleek styling, M-LOK modularity and real steel robustness. LCT's Railed Top Cover, AR Buffer Tube and X47 Enhanced Selector Switch complete the metamorphism, with the 5KU DTK-2 Muzzle Brake enhancing the already brutal aesthetic.

Inside, you'll find flawlessly installed high-end parts from all the biggest names in the Airsoft aftermarket, including Gate Electronics, FPS Softair, Laylax/Prometheus, RetroArms, Warhead Industries, Lonex and Maple Leaf, resulting in performance to rival if not best the Bolster Armouries flagship AEG, the incredible ONYX. Each trigger press produces an instant response with incredible accuracy and range, reaching out to 60 meters comfortably with an impressively tight grouping. Flick the fun switch and all hell breaks loose as the VULKAN emits an astonishing 30 rounds per second with flawless feeding and minimal heat build-up, meeting the Bolster Armouries performance parameters and then some!

As with previous Bolster Armouries platforms, the VULKAN allows you to unleash pure performance guilt-free, knowing your primary was assembled and tuned by talented techs who take pride in their work and simply will not let anything less than perfection leave the workbench, evidenced by the Bolster Armouries 24-Month Dedicated After-Sales Service Programme supplied with each Bolster AEG. This is the premium Airsoft experience, now in AK flavour!

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series is uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series is built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS electronic trigger unit and a rotary HOP-up unit, with programmable fire mode options through the Ares Programming Box (available separately).

The AR-308L Deluxe Version is the full-length member of the Ares AR-308 family and comes ready for DMR duty straight out of the box, including the superb Ares 1-6x24 Illuminated scope, a dual ring scope mount, the Ares QD suppressor and two mid-cap magazines, all served to you in an excellent quality hard rifle case. 

The AR-308L is electronically locked to semi-automatic, hitting out at an impressive 420 FPS average straight out of the box, meaning you don't need the Ares programming box to change this to a DMR role; it's already ready to rock. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what's better, the external quality or the ferocious performance of this big boy AR!

Bolster Armouries presents the FARRAR Precision Hi-Capa, built on the bedrock of multiple successful iterations of Bolster’s MOONSTONE and QUARTZ platforms with design specs laid out by Bolster Armouries resident IPSC shooter to meet the performance requirements and aesthetic of an Open Division race gun.

Forged from the well-respected Tokyo Marui Hi-Capa Gold Match outfitted with the Airsoft Masterpiece “Smoking Holes” CNC Slide and Frame Kit, the FARRAR Precision Hi-Capa boasts the best of the best when it comes to external quality and is bristling with CNC machined steel and aluminium internal parts, with little of the original Gold Match remaining.

Beneath the gorgeous Smoking Holes kit, you’ll find all of the best parts unearthed during the Bolster R&D process from top-tier brands such as Maple Leaf, AIP, Airsoft Masterpiece and EDGE Custom, all professionally fitted by one of the most talented pistol techs in the country and backed up by the Bolster Armouries 24-Month Warranty and Service Programme.

To make matters even sweeter, this beast of a custom Hi-Capa is topped off with a Vector Optics Frenzy-X Red Dot Sight mounted via the superb JL Progression Amphibious Mount, giving you everything you need to get stuck into Open Division IPSC or skirmish with a truly incredible primary pistol platform that will outshoot any other GBB pistol you can buy off the shelf.

Available in two striking colour schemes with a look unlike anything else out there, the FARRAR Precision Hi-Capa is an absolutely stand-out platform, even alongside other top-tier Hi-Capa builds. If you've always dreamt of wielding a custom GBB pistol which can go toe to toe with rifle platforms in-game and outcompete the best IPSC Hi-Capa builds around when shooting against the clock, set your sights on the Bolster Armouries FARRAR Precision Hi-Capa!

Bolster Armouries presents the FARRAR Precision Hi-Capa, built on the bedrock of multiple successful iterations of Bolster’s MOONSTONE and QUARTZ platforms with design specs laid out by Bolster Armouries resident IPSC shooter to meet the performance requirements and aesthetic of an Open Division race gun.

Forged from the well-respected Tokyo Marui Hi-Capa Gold Match outfitted with the Airsoft Masterpiece “Smoking Holes” CNC Slide and Frame Kit, the FARRAR Precision Hi-Capa boasts the best of the best when it comes to external quality and is bristling with CNC machined steel and aluminium internal parts, with little of the original Gold Match remaining.

Beneath the gorgeous Smoking Holes kit, you’ll find all of the best parts unearthed during the Bolster R&D process from top-tier brands such as Maple Leaf, AIP, Airsoft Masterpiece and EDGE Custom, all professionally fitted by one of the most talented pistol techs in the country and backed up by the Bolster Armouries 24-Month Warranty and Service Programme.

To make matters even sweeter, this beast of a custom Hi-Capa is topped off with a Vector Optics Frenzy-X Red Dot Sight mounted via the superb JL Progression Amphibious Mount, giving you everything you need to get stuck into Open Division IPSC or skirmish with a truly incredible primary pistol platform that will outshoot any other GBB pistol you can buy off the shelf.

Available in two striking colour schemes with a look unlike anything else out there, the FARRAR Precision Hi-Capa is an absolutely stand-out platform, even alongside other top-tier Hi-Capa builds. If you've always dreamt of wielding a custom GBB pistol which can go toe to toe with rifle platforms in-game and outcompete the best IPSC Hi-Capa builds around when shooting against the clock, set your sights on the Bolster Armouries FARRAR Precision Hi-Capa!

If you plan to move up to a premium sidearm, the Patrol Base X PTS Sig Air ProForce M18 GBB Pistol w/ PTS Killer Innovations Slide Kit should be in your sights! A marriage between the Sig Air M18 GBB Pistol and PTS's absolutely incredible Killer Innovations Velocity Defense V1 Conversion Kit, this custom-built M18 cycles at an incredible pace, with a flawless feel and a Maple Leaf MR HOP pre-installed for impressive long-range effect on target.

On the outside, this M18 is dressed in its absolute finest, rocking a flawlessly replicated Velocity Defense Compensator which dominates the front end with an aggressive, high-speed edge. The Velocity Defense V1 Slide boasts dynamic slide ports to reduce weight, flawless engraved trademarks, angled slide serrations and optics-ready functionality, with an RMR footprint red dot mount plate and steel suppressor-height iron sights, ideal for co-witnessing.

If you ever want to change things up and run a tracer unit or suppressor, you'll be happy to learn that the fluted Velocity Defense outer barrel features common 14mm CCW male threading at the tip, allowing the gorgeous comp to be swapped out for a muzzle device of your choice.

With parts professionally installed by our talented head technician, including the smoothing of the internal frame rails of the base M18 pistol and reapplication of high-quality Perfect Airsoft-branded lubricant for super-slick cycling, the Velocity M18 pre-build will save you a fair amount of hassle and time compared to carrying out the installation yourself, not to mention keeping your 12-month warranty intact, and the included PARRA Quokka Premium Pistol Case with pre-picked PNP foam. If you have an appetite for a sidearm from the Premium side of Airsoft, the Patrol Base X PTS Sig Air ProForce M18 GBB Pistol w/ PTS Killer Innovations Slide Kit is exactly that!

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. We can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky.

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET or HAL MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET or HAL MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

If you're looking for the best out-of-the-box Airsoft sniper rifle around, you just found it! The Novritsch SSG11 Airsoft Sniper Rifle is the next evolution of Novritsch's SSG10 platform, boasting improved ergonomics, more quality-of-life features and far more power potential than the previous SSG10 thanks to its increased cylinder volume and compatibility with piston weights and FPS tuning rings.

The SSG11's advantages over legacy sniper rifle designs are almost too numerous to list! Its CNC aluminium TDC HOP-up allows for heavy ammo weights while providing a strong HOP-up effect with minimal side-to-side deviation. Its "bull" inner barrel has thicker walls than the usual, reducing the effects of vibration for a considerable accuracy edge. Its left/right swappable bolt handle makes it uniquely suited to left-handed shooters, and its ergonomic chassis design is ready to be customised with Harris-style bipods, M4 GBBR pistol grips and M4 sliding stocks to make the SSG11 truly yours.

If you held off on the SSG10, the SSG11 will make you glad you did! Feature-packed with a modern aesthetic, top-tier performance and loads of customisation options, the Novritsch SSG11 Airsoft Sniper Rifle is the ultimate player-friendly sniper platform!

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you're into the 416 vibe but want an AEG you'll never need to upgrade, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG is the way to go! Based on the original 416 with its 20mm Picatinny quad rail handguard, this full metal AEG is packed with pre-upgraded parts the likes of which you won't find in other out-of-the-box Airsoft guns. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding at high speeds.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

If you're working on a special forces loadout or a GWOT DEVGRU kit, this is practically the perfect primary! With solid build quality, pre-upgraded internals leaps and bounds ahead of the rest and advanced technology inside, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG ticks all the boxes!

If you're into the 416 vibe but want an AEG you'll never need to upgrade, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG is the way to go! Based on the original 416 with its 20mm Picatinny quad rail handguard, this full metal AEG is packed with pre-upgraded parts the likes of which you won't find in other out-of-the-box Airsoft guns. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding at high speeds.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

If you're working on a special forces loadout or a GWOT DEVGRU kit, this is practically the perfect primary! With solid build quality, pre-upgraded internals leaps and bounds ahead of the rest and advanced technology inside, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG ticks all the boxes!

The latest from the Airsoft Gods at Tokyo Marui, the AK Storm is a reinvention of the original TM AKM NGRS rifle from many years ago. The Storm takes the classic AK design and outfits it for a more modern era, complete with a 6-position retractable stock, both M-LOK and 20mm Picatinny rail mounting interfaces and an ergonomic pistol grip which will leave you not wanting to put this rifle down! 

The most notable addition to this new AK NGRS is its "stop firing on empty" feature, which will never leave you guessing as to when your magazine has run dry. If this happens, the AK Storm does what a real AK does, absolutely nothing - meaning you must quickly insert a loaded magazine and pull back the charging handle to allow the Storm to continue to unleash a storm of BBs upon the enemy team!