Airsoft Magazines

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

An Electric Box Magazine for M249 Support / Light Machine Guns, that holds a total of 1500rnds and is powered by an included Rechargeable Battery. The Magazine has a variety of options and can be operated using an included Pressure Pad, can be set to wind constantly, and there is also a 'Sound Control' mode. This mode will only wind the Magazine when it can hear the Gun firing, which is the mode you'll most likely end up using. Included in the box is a Rechargeable Battery and Charger. All you need to do is charge the Battery, install it in the Magazine, pour your BBs in and set the winding mode you want to use. Easy as that.

A high capacity magazine for the AS VAL / VSS / SR-3 family Assault Rifles, which holds a total of 250rnds and is wound from the bottom clockwork wheel to feed BBs into the gun. 

A Polymer constructed High Capacity magazine for the G&G TR16 MBR .308 series of AEGs, which holds a total of 370rnds and is filled by pouring BBs in through the top Fill Window. The winding wheel on the bottom is then turned to feed BBs in to the replica.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

One of the best things about the Jing Gong LK58 Airsoft AEG series is its massive capacity yet short in length magazines, packing 500 rounds into a magazine that will still allow you to keep low in the woods and avoid getting hit. The LK58's 500rnd high-cap magazine is now available as a spare, meaning you can now rock a 1000 BB loadout with only two magazines!

This magazine is constructed with a steel shell and polymer internals and is a wheel or key wound high capacity magazine. The winding wheel can be found on the base plate, and for faster winding, the magazine can also be wound up using the included key, through the winding port on the right side of the magazine body. The fill window is located at the top of the magazine and can be opened by hand. This magazine is designed for the Jing Gong LK58 Airsoft AEG series.

Looking for Grease Gun mags? The Snow Wolf 520rnd High-Cap Magazine For M3/M3A1 Grease Gun AEG is authentically built with a steel shell and is a wheel wound high cap magazine which holds 520 BBs. The magazine can be loaded through the fill window at the top of the magazine body by pouring BBs straight in and the winding wheel is located on the baseplate and needs to be wound up to tension the mag.

This magazine is compatible with the Snow Wolf M3 and M3A1 Grease Gun AEGs but may not be compatible with other brands.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

A 530 round high capacity, wheel-wound magazine, designed for use with G&G's UMG SMG electric replica. Constructed from durable, high strength and lightweight polymers.

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading. 

A high capacity magazine designed for G&G M14 AEGs. An utterly essential piece of Airsoft kit for any G&G M14 owners, this spare high cap magazine allows you to carry more ammunition in the field without needing to make a hasty retreat to reload your magazines.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

If you are rocking the old school WW1 and WW2 support gun, the Browning Automatic Rifle, you are going to need more ammo to keep up with all the "walking fire" you will be doing! This 160rnd High-cap Magazine from S&T is designed for the S&T M1918 BAR AEG rifle and is constructed with a steel shell, polymer internals and a steel feed spring. This magazine is realistic in size, and external design, with reinforcing ribs running down each side of the steel shell and mock feed lips at the top of the magazine, concealing the feed port and the fill window below. This magazine is a wheel wound high-capacity mag, and the winding wheel is located on the base plate. The magazine can be filled using the fill window located at the top of the magazine, inset into the shell.

If you are running the Papasha and you need more firepower an extra Drum Magazine should be plenty! The Snow Wolf 2000rnd Drum Magazine for PPSh-41 AEG is constructed with a steel exterior and polymer internals and is a wheel-wound high-cap magazine with an insane 2000rnd capacity. This mag is only compatible with the Snow Wolf PPSh-41 EBB AEG and will in all likelihood not work with the S&T version.

A High Capacity Magazine for the Tokyo Marui Scorpion Mod.M Submachine Gun, that holds a total of 260rnds and is wound from the bottom of the Magazine as per any standard High Cap. To fill the Magazine, simply open the Fill Window at the top/front of the mag and pour your BBs in. Wind the clockwork wheel on the base of the mag to start feeding BBs into your gun.

If you are running the old "Papasha" SMG, either because you are a WW2 reenactor or just because you love the way the PPSH looks, having an extra drum magazine available cannot hurt your chances in-game! The S&T 2000rnd drum magazine is constructed from steel and is filled by removing the rear plate of the magazine. This can be done by loosening the knurled nut on the rear of the magazine, at the centre, and rotating the locking tab downwards, after which the rear of the magazine can be lifted free. The BBs should be loaded in the upper section, and the rear plate replaced before winding the magazine up with the winding wheel on the bottom.

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

Looking for mags for your M14 battle rifle? Jing Gong has just what you need! The 400rnd High-capacity magazine is designed for Tokyo Marui style M14 AEG rifles such as the Jing Gong JG1401 and CYMA CM.032 but is not compatible with G&G M14 AEGs.

This mag holds an impressive 400 6mm BBs and is a wheel wound high-capacity design with a winding wheel located on the baseplate. The mag can be loaded through its fill window on the top rear of the magazine body which is easy to open by hand with the help of a fingernail. This magazine has a steel shell to give a realistic feel, and has reinforcement grooves in either side for that classic M14 cold war battle rifle look.

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

A 600rnd High Capacity Magazine for the LCT LK-33 Series, made with a highly realistic Steel Outer Shell to closely match the real thing. It is filled by pouring BBs in through the top Fill Window, and wound at the base of the Magazine to feed BBs into your Gun. If you own an LCT LK-33 Series Airsoft Electric Gun and want to stay in the fight for longer without re-filling Magazines, then the LCT LK007 LR-223 600rds Magazine is ideal.

If you're running an M82A1 AEG, you need some spare mags for it, and AEGs work best with high-caps, right? This mag from Snow Wolf has a whopping 500 round capacity and is wheel wound from the bottom so you won't be switching mags any time soon.

Constructed from lightweight polymer, this mag helps keep the weight of your huge Barrett down. So grab this mag and start picking people off en masse!

The Chief wouldn't have gotten far without reloading, for that he needed additional mags and if you've found this page, we're assuming you do too!

Constructed from high density polymer, the magazine is specifically for the Replica MA5B. Holding 190 rounds, the mag is a high cap which is 'reloaded' by winding the wheel at the bottom and filled using the fill window at the top of the mag.

So reload and go slay some Covenant!

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

Every good sniper needs good mags. If you're one of the lucky few that wield the Barrett M98B M-RAD, you'll need the round to maximum picking targets off from afar.

This magazine from Snow Wolf has a 280 round capacity with a high cap design, meaning you can pop this mag in and fire for a huge period of time without the need to switch mags.

With a lightweight polymer design, the mag also helps keep your huge rifle's weight down.

If you're running the ICS TOD aka IDF Defender, load up on these magazines! The 400rnd Steel High-Cap Mag for ICS TOD/IDF Defender AEG offers realistic stamped steel construction for a realistically hefty feel, the perfect pairing for the highly realistic ICS IDF Defender. 

Like other wheel-wound Airsoft high-cap magazines, this mag is filled through the fill window on the top of the mag body by opening the hatch and pouring BBs straight in. With this done, close the hatch, wind the winding wheel on the baseplate 5-10 times or until the magazine is properly tensioned (listen out for the clicking noise made by the winding wheel changing) and you are ready to rock. If feeding ceases, wind the wheel again to get it feeding once again. If you're rocking the ICS IDF Defender, these are the mags you need!

Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

A STANAG type magazine which is designed to fit any Airsoft 6mm BB Gun which accepts this style of magazine, such as M4, L85, 416 and more. This type of magazine is perfect for regular Airsoft skirmishers as the magazine holds lots of rounds, and increases the length of time between having to stop and reload, allowing you to put more rounds down range without stopping.

Whether you are new or a regular skirmisher, who doesn't want the hassle of regularly changing magazines but still wants that authentic look, these are an essential purchase.