Airsoft Under £25

If you need a slim stick battery for your ASG Scorpion, M4/AR-15 AEG buffer tube or top-wired AK AEG this will do the trick! The Gen's Ace 7.4v 1500mAh 25C LiPo Stick Battery measures approximately 12x1.5x1.6cm which makes it perfect for rear wired M4 platforms with the standard buffer tube battery compartment, top wired AKs which house their battery beneath the top cover and SMG-5K platforms. The battery is pre-wired to a Mini-Tamiya connector and the length of wire between the cell group and the connector is approximately 6cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C, making it great for almost any Airsoft AEG and a perfect fit for the ASG Scorpion EVO 3A1, though make sure you measure before ordering!

If you are less of a loud and proud skirmisher and more of a low-profile and stealthy kind of player then you need to make sure your primary is also dressed for the part! The Novritsch Camo Cover - SSQ22 fits perfectly on the Novritsch SSQ22 rifle and is designed so that it doesn't interfere with any of the controls of the platform.

It helps to break up the highly recognisable outline of an Airsoft platform with its woodland colours and irregular shape. The Cover is constructed from Nylon fabric mesh, complete with 3D leaves to make it truly disappear in a natural environment. The cover mounts to your SSQ22 via Velcro straps and an adjustable bungee cord, allowing you to get a snug fit and keep the controls accessible regardless of your choice of mission essential accessories.

If you intend to defeat millions of years of evolved threat recognition instincts, getting ghillied up with the Novritsch Camo Cover - SSQ22 on your primary will give you your best shot at remaining invisible on the battlefield!

If you are less of a loud and proud skirmisher and more of a low-profile and stealthy kind of player then you need to make sure your primary is also dressed for the part! The Novritsch Camo Cover - SSQ22 fits perfectly on the Novritsch SSQ22 rifle and is designed so that it doesn't interfere with any of the controls of the platform.

It helps to break up the highly recognisable outline of an Airsoft platform with its woodland colours and irregular shape. The Cover is constructed from Nylon fabric mesh, complete with 3D leaves to make it truly disappear in a natural environment. The cover mounts to your SSQ22 via Velcro straps and an adjustable bungee cord, allowing you to get a snug fit and keep the controls accessible regardless of your choice of mission essential accessories.

If you intend to defeat millions of years of evolved threat recognition instincts, getting ghillied up with the Novritsch Camo Cover - SSQ22 on your primary will give you your best shot at remaining invisible on the battlefield!

If you are less of a loud and proud skirmisher and more of a low-profile and stealthy kind of player then you need to make sure your primary is also dressed for the part! The Novritsch Camo Cover - SSQ22 fits perfectly on the Novritsch SSQ22 rifle and is designed so that it doesn't interfere with any of the controls of the platform.

It helps to break up the highly recognisable outline of an Airsoft platform with its woodland colours and irregular shape. The Cover is constructed from Nylon fabric mesh, complete with 3D leaves to make it truly disappear in a natural environment. The cover mounts to your SSQ22 via Velcro straps and an adjustable bungee cord, allowing you to get a snug fit and keep the controls accessible regardless of your choice of mission essential accessories.

If you intend to defeat millions of years of evolved threat recognition instincts, getting ghillied up with the Novritsch Camo Cover - SSQ22 on your primary will give you your best shot at remaining invisible on the battlefield!

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

If you need a replacement bolt handle for your CM.707 Sniper rifle you are in luck! This CYMA part is an original replacement, intended for the refurbishment of an old and worn out sniper rifle. The handle is constructed from steel and does not include the polymer end piece so you will need the original end piece from your rifle to complete it.

If you're looking for SAIGA-12 mags for your Double Bell SAIGA-12 AEG or want to give your AK a different look, the Double Bell 300rd Hi-Cap Magazine for SAIGA-12K AEG is what you need. This polymer high-capacity magazine holds approximately 300 BBs and is filled through the fill window at the top of the magazine body. Simply pop the fill window door open, pour your BBs in, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're good to go!

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction.

An Aluminium constructed folding rear iron sight for 20mm rails which is fully adjustable for windage and elevation.

If you are looking for an excellent replacement piston for your AEG then look no further! The RetroArms 14.5 Steel Tooth Piston is the perfect piston upgrade. Its injection moulded carbon-reinforced polymer ensures premium quality and consistency, the fourteen-and-a-half steel teeth are highly wear-resistant and greatly extend the lifespan, and it also keeps your Airsoft rifle performing up to standards. The half-tooth allows the piston to be picked up by the gears more easily and minimises the chance of the teeth bouncing off the gear and causing internal damage.

The RetroArms 14.5 Steel Tooth Piston is great for high-performance builds and is designed for version 2 and version 3 gearboxes. Make your AEG premium with this simple upgrade piece!

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

A replacement or spare Gas Tank for the Golden Eagle Type 870 Series M870 Gas Airsoft Shotguns. Made to the original specifications, this Gas Tank will pop into the Stock of a Type 870 Series M870 Gas Shotgun and keep you in the fight for longer. If you own a Gas Golden Eagle M870 and want to carry Spare Tanks rather than a large Bottle of Gas in the field, then these Gas Tank replacements are ideal for you.

If you need a battery for your AR36 AEG or polymer handguard equipped M4/AR-15 AEG this one will do the trick! The 7.4v 1800mAh 20C LiPo Flat Nunchuck Battery from Electro River is a flat nunchuck style battery, also known as a "butterfly" configuration. Unlike other nunchuck batteries, this won't inside a crane stock and is more suitable for large polymer handguards such as those found on AR36 and M4A1 AEGs and will also fit nicely in most fixed rifle stocks.

The battery itself is a 2-cell 7.4V LiPo with a wire length of approximately 9cm between the cell groups and the connector, and each of the two cell groups measures 10 x 0.6 x 3.5cm approximately. The pre-wired connector is the common mini-Tamiya type and the continuous discharge rate is 20C, with a maximum discharge rate of 40C.

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

If you are having trigger issues with your ARCTURUS M4/AR15 AEG this replacement original part set should cure it! The ARCTURUS Microswitch V2 for ARCTURUS AEG series includes the microswitch itself, a Deans/T-plug battery connector and spade connectors all wired together for a relatively simple installation procedure. The set should not require soldering to install, but as always, we recommend a certain level of confidence and expertise if you plan on installing this part.

Fixed up your faulty platform and get it back on the battlefield in no time!

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

A high quality 11.1V LiPo battery with a 1200mAh capacity, suitable for both Airsoft and RC use.

If you want to make your AK a little more... AK. Then the LCT AK104 Flash Hider is for you! This flash hider is a replica of the real steel AK104 trumpet-style flash hider. It attaches to 24mm CW threading and is constructed from steel, giving it a hefty weight and a realistic feel. It has a wear-resistant finish and its sturdy construction ensures that it will survive more than its fair share of skirmish-related bumps.

To fit this flash hider on more common threads you will need a 24mm to 14mm thread adapter. Give your AK the classic look with a real steel-styled flash hider and keep your AK in the 20th century, right where it belongs.

The Shadow Foam Hot Foam Smoother is similar to a soldering iron and is perfect for adding some final smoothing touches or creating some personalised designs such as engraving your name into your Shadow Foam. It includes three different tips, a circular tip, a pointed tip and a leaf tip. These are extremely useful for brushing over bumps and removing foam fluff.

The product also includes a stand for your tool, so you do not have to risk burning your table whilst using this tool. Remember to operate this tool safely, it gets extremely hot and the correct safety procedures must be followed whilst using it.

If you want to reload faster while keeping your eyes up, the Delta Armory Flared Magazine Well Extension for P-Series GBB Pistols is the key! This flared magwell is constructed from CNC machined aluminium and is compatible with the Delta Armory DA-P series EU17 GBB range. It may fit other brands, but we cannot guarantee it! 

Flared magazine wells have been a popular upgrade for competition pistols for decades now but have recently found their way onto high-end tactical sidearms intended for combat. Designed to guide your magazine in so you can reload "eyes-up" or speed up your reloads without risking missing the magwell, a flared magazine well can save you hours of training and get you back online faster, ready to bag that all-important kill!

On either side, Delta's Flared Magazine Well Extension includes discretely yet cleanly engraved Delta Armory branding, matching well with the aesthetic of the DA-P series for a professional, completed look. The front features a slight extension designed to function as a palm rest, ensuring you have a consistent grip and thus maximum accuracy every time you draw your sidearm. If you want to reload like John Wick but don't have time to train all day and night, the Delta Armory Flared Magazine Well Extension for P-Series GBB Pistols will give you the edge you need!

If you're rocking the impressive Acetech Genesis or Genesis Lite Tracer Unit and need a way to holster it, here you go! The Acetech Genesis Holster Adapter mounts to Genesis-equipped EU17/18 and Glock 17/18 pistols or EU19/Glock 19, depending on the variant you choose. This allows them to be holstered in the Novritsch Universal Holster Base. The set includes the Holster Adapter and a pair of M4x12mm screws used to mount the adapter to your Genesis or Genesis Lite tracer unit.

While a Genesis-equipped Glock or EU series makes a killer primary for CQB, if you want to use it alongside a rifle and aren't a talented juggler, this adapter is essential!

A complete Switch Assembly for a variety of AEGs, which includes Low Resistance Wiring with either a Mini Tamiya or Deans Connector on the end.

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

A Steel manufactured Fire Selector for LCT branded AKM models; ideal as a spare part or replacement.

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

This LiPo battery from Gens Ace is designed to fit into flat and long battery compartments, such as those found inside the handguards of an AR36 or SMG-5. The battery connects to your AEG via a Deans connector (aka a T-Plug) and provides 1300mAh capacity with a 25C discharge rating. The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 8cm, allowing some flexibility when squeezing the battery into small spaces. This battery would be great for any Airsoft gun which requires a 7.4V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

Constructed from aluminium, this speed style flat surface trigger is great for quicker trigger manipulation and providing your rifle with the SPEEDQB aesthetic. It also features a ridged front texture for additional handling and grip. Lightweight, with a sweet metallic shine, this trigger is designed for Ares AMOEBA series.