All Two-Tone Airsoft Guns

This is the most iconic assault rifle! There is a reason why this rifle has so many variations and is seen everywhere in Airsoft, it looks good, has plenty of rail space and is just a great overall platform for skirmishers. The Specna Arms SA-K02 ONE™ M4A1 AEG; Kestrel Basic ETU is an excellent choice for any Airsoft player, it shoots great out of the box, but there is also plenty of room for upgrades to take this rifle to the next level.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the SA-K02 ONE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M4A1 AEGs on the market!

If you are building a special forces loadout for your skirmishes and you're in search of an iconic platform to match the look, the Specna Arms SA-K02 ONE™ M4A1 AEG; Kestrel Basic ETU is the Airsoft replica for you!

If you are in the market for an M4/AR-15 optimised for woodland warfare this one would suit you well! The Specna Arms SA-B03 ONE™ replicates the real-world SR-16 rifle, a high-end M4/AR-15 rifle from the US. Like the original SR-16, the Specna Arms version boasts a 10.5-inch free-floated handguard known as the "URX2", an extended handguard with ample rail space, QD sling sockets built-in and perfectly suited to the modern C-clamp grip technique.

On the inside, the SA-B03 has been upgraded to handle stronger springs, sporting a steel quick change spring guide mounted on ball bearings for reduced rotational stress, an aluminium cylinder head and piston head, reinforced steel gears and a lightweight polymer piston with a full rack of steel teeth, plus the added benefit of the programmable Kestrel Basic MOSFET. If you are looking for a base gun for a DMR project this would do the job perfectly thanks to its 16-inch outer barrel and the Enter & Convert™ quick change spring system!

If you are into WW2 reenactment and fancy a Red Army loadout, then S&T has just the thing for you! The Mosin-Nagant M1938 Bolt-Action Rifle is a near-immaculate replica of the Mosin-Nagant M1938 Carbine that the Soviet Army used during WW2. It was less common than its older brother, the Mosin-Nagant M1891/30, but it is still an iconic platform nonetheless. It is made from real wood giving it that authentic feel and weight.

S&T's Mosin M1938 replica follows a similar format to its longer counterpart, the M1891/30, boasting a beautiful antique finish on its metal components and stunning real wood furniture to make a rifle that would be equally at home in a glass cabinet as it would be on the skirmish field. From a performance standpoint, this M1938 is no joke, coming out of the box shooting at approximately 400 FPS when we tested it, and it's also compatible with VSR-10/GBB type inner barrels and HOP-up rubbers. If you need a Mosin-Nagant replica that shoots as exquisite as it looks, this is one of the finest available!

If you've been waiting for the perfect Minigun for a fast-moving playstyle, the WELL PRO WE23-MINI Compact Rotary Minigun AEG is exactly that! Based on the innovative WE23-S Rotary Minigun, this more agile alternative is equipped with a sliding minimalist stock and conventional pistol grip setup, giving it handling more similar to an assault rifle but with firepower that is hard to beat!

On the inside, the WE23-MINI is rocking the same awesome internals as the -S model. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

If you're looking for a head turner of an Airsoft support weapon which really brings the pain in-game, the WE23-MINI is one to watch. With the same incredible 36 RPS fire rate as its bigger brothers in a more compact and practical form, the WELL PRO WE23-MINI Compact Rotary Minigun AEG is ready to change your game!

If you're looking for a high-end base for your dream DMR build, the KRYTAC Trident MK3 SPR-M AEG is one of the best options out there! Boasting flawless full metal construction, a flawless finish and an external redesign with KRYTAC's latest furniture, this is the KRYTAC SPR in its ultimate form, offering better performance and handling than ever before!

If you're looking for a high-end base for your dream DMR build, the KRYTAC Trident MK3 SPR-M AEG is one of the best options out there! Boasting flawless full metal construction, a flawless finish and an external redesign with KRYTAC's latest furniture, this is the KRYTAC SPR in its ultimate form, offering better performance and handling than ever before!

The SCAR-L CQC is part of Tokyo Marui's Next Generation Recoil Shock series, meaning it has a mechanical blowback system inside that moves a weight when you fire, simulating realistic recoil. Not only this, but it has a functional bolt-stop that will stop the Gun from firing when it is empty, until the Bolt Release is pressed, as per a real firearm.

An Airsoft Electric Pistol which features a MOSFET for a rapid rate of fire and consistent performance.

Feel the weight of this absolute classic! With a full metal build and incredibly satisfying pump action, this shotgun features the original full-length build with beautiful faux wood stock and pump.

The shotgun is single shot, firing at roughly 370 FPS, which is incredibly reliable for taking people out on the field at close range or at a distance.

If you're from the old school of Airsoft and a fan of Chris Costa and Travis Haley, this AK will get you excited! The Golden Eagle 6832C MAG-K Tactical AK-105 AEG Rifle is styled after the real steel "MAG-K", a custom AK rifle made by Travis and Chris back in the day, complete with a unique ambidextrous charging handle setup only found on this rifle and never put into mass production.

The Golden Eagle MAG-K boasts full metal construction with loads of steel, giving it the realistic weight and heft an authentic AK replica deserves. At the rear, we have a 6-position M4/AR-15 buffer tube with an LE stock pre-installed, though if you're replicating the real MAG-K build, we suggest swapping it out for a real steel CTR stock. Up front, we are equipped with a 20mm Picatinny railed handguard and replica "UltimAK" railed gas tube, ready for any 20mm Picatinny accessories you need to add, whether for aesthetics or functionality.

Whether you're specifically after a MAG-K replica or simply seeking a modernised tactical AK with a unique look, the Golden Eagle 6832C MAG-K Tactical AK-105 AEG Rifle should suit you perfectly!

If you're a fan of real steel pistols then surely the STACCATO C2 frame has you interested! This compact, cutting-edge Hi-Capa 3.8 looks like a real premium sidearm. Boasting full metal construction with licensed STACCATO trademarks and its aggressive hand-stippled grip, this pistol looks elite and will make your friends and foes jealous of your sexy sidearm.

Externally, the STACCATO C2 is equipped with an optics-ready slide with an RMR footprint red dot mount plate pre-installed, a light enhancing front iron sight paired with an anti-glare rear sight, forward slide serrations and an undercut trigger guard, providing everything a modern Hi-Capa needs to compete with the best on the field.

Inside, this upgraded STACCATO C2 features the same 6.03mm tightbore inner barrel, redesigned nozzle made of cold-resistant polymer, and a magazine valve that maximises gas efficiency and reliability. But now, the upgraded version has steel components in key areas that are most likely to suffer from wear and tear. This includes the hammer assembly and recoil spring guide. If you're seeking a sidearm with no performance compromises, the EMG R612A STACCATO 2011 Hi-Capa C2 GBB; Upgraded Version is for you!

A dense and well constructed G36 family Airsoft replica, which is powered by electric features an integrated telescopic sight as part of the carry handle, as well as a multi-position sliding and folding stock.

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

If you're into the latest high-end American rifles, the EMG Daniel Defense M4A1 RIII™ 14.5" should be right up your street. This full metal M4/AR-15 AEG is based on the carbine length option in the Daniel Defense RIII™ line and is a near-perfect match for the real thing. On the outside, we are treated to a perfectly replicated M4A1 RIS III M-LOK  handguard, DD Tornado pistol grip, Grip-N-Rip charging handle and the latest DD Buttstock, along with flawlessly engraved Daniel Defense trademarks.

The M4A1 RIII™ is built around a reinforced version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor, resulting in a very impressive rate of fire and a near-instantaneous trigger response. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, giving you the right core parts to get the job done at long range.

As a platform for outdoors skirmishing or Airsofters who find themselves in a mixed environment, the DD M4A1 RIII™ is a fantastic choice. With a longer barrel than the average coupled with a lightweight and agile M-LOK front end, the M4A1 RIII™ can tackle the enemy team at range and still be whipped around at break-neck speed when clearing rooms!

If you're into the latest high-end American rifles, the EMG Daniel Defense M4A1 RIII™ 14.5" should be right up your street. This full metal M4/AR-15 AEG is based on the carbine length option in the Daniel Defense RIII™ line and is a near-perfect match for the real thing. On the outside, we are treated to a perfectly replicated M4A1 RIS III M-LOK  handguard, DD Tornado pistol grip, Grip-N-Rip charging handle and the latest DD Buttstock, along with flawlessly engraved Daniel Defense trademarks.

The M4A1 RIII™ is built around a reinforced version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor, resulting in a very impressive rate of fire and a near-instantaneous trigger response. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, giving you the right core parts to get the job done at long range.

As a platform for outdoors skirmishing or Airsofters who find themselves in a mixed environment, the DD M4A1 RIII™ is a fantastic choice. With a longer barrel than the average coupled with a lightweight and agile M-LOK front end, the M4A1 RIII™ can tackle the enemy team at range and still be whipped around at break-neck speed when clearing rooms!

We have all been drooling over the real KelTec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES. 

We have all been drooling over the real KelTec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES. 

Stylish modern AKs are a gorgeous way to take your Russian loadout into the 20th century! The CYMA CM.113B AKS-74U Zco Custom AEG is a compact powerhouse designed to dominate the battlefield and look good whilst doing so. This beast boasts full metal construction with a hefty steel receiver along with flawlessly machined external enhancements inspired by real steel Zco parts. With a dynamic and individualistic style, the CM.113B is perfect for any contemporary AK-themed loadout!

Internally, we're treated to CYMAs high-speed E-Edition internals, including 13:1 high-speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high-speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

So, if you're keen on a modern Russian loadout or you like the one-of-a-kind Zco style, the CYMA CM.113B AKS-74U Zco Custom AEG; Kestrel Basic ETU should be just the platform for you, plus, its compact but highly adjustable design makes it great for pretty much any playstyle!

For those looking for an AR36 that can be kitted out like a railed M4, the G608-7 would be a great choice. This AR36C has had some external upgrades added to give it a unique look and some enviable functionality, with 20mm Picatinny rails available wherever they are needed, and a pre-installed suppressor which is partially covered by the handguard for a sneaky special forces inspired look. This AR36 can also boast "full metal construction", despite being made mostly from polymer as its metal-to-polymer proportions match the real rifle perfectly. If you want something other than a boring old M4 that doesn't compromise on modularity or customizability and sports fully ambidextrous controls, this is it! 

WE Europe brings us the ever popular F226 based on the iconic pistol used by British Forces and many more around the world. This Airsoft replica comes with a whole host of features including realistic gas blowback recoil, front rail and functional decocker. 

Constructed high density polymer with a sturdy alloy slide, this F226 continues on from WE Europe's trend of putting together reliable and gas efficient pistols with a quick cycle rate , snappy recoil and robust internals.

if you're looking for an exciting new sidearm that nobody has yet, the ASG CZ P-10C CO2 GBB Pistol is exactly that! Based on the real steel CZ Firearms P-10C, complete with official licencing, the ASG P-10C boasts full metal construction, ferocious recoil, a beastly muzzle report and impressive slide speed thanks to its CO2 power source. As we might expect from an officially licensed platform from ASG, the P-10C is adorned with flawlessly engraved trademarks and built like a tank, making it a fantastic choice for collectors and skirmishers alike. 

Internally, the P-10C is a unique design but is similar to Glock and EU series pistols in the layout of the controls, meaning an easy transition for EU series users and no training scars to work around. Meeting the bar set by the best modern semi-automatic pistols out there, the P-10C also boasts interchangeable back straps, an ambidextrous slide lock/release, a comfortable ergonomic pistol grip with aggressive texturing and front slide serrations for flawless wet weather handling. If you're the type of skirmisher who appreciates a unique, lesser-seen platform with top-notch build quality, the CZ P-10C from ASG belongs in your holster!

A Gas Blowback fully automatic Airsoft Pistol, featuring 'Racoon City Police' trademarks. This pistol has a Black finish with Raccoon City trademarks and a impressive kick to it.

The JW3 Combat Master is back and it's better than ever before! The Army Armament TTI JW3 Hi-Capa Combat Master; Upgraded Version boasts a CNC machined slide and frame, steel hammer group parts and a redesigned cold-resistant nozzle, resulting in the best pre-built JW3 we've handled yet. 

Naturally, the Upgraded JW3 is full metal, just like the original, but its super fine CNC machining really makes the details pop, with a varied finish on the slide serrations which matches the real thing perfectly. The usual JW3 compliment of enhanced externals is still present, including its light-enhancing iron sights, flared magazine well, trigger guard undercuts, extended mag catch and stipple textured grip. As with the original, the Upgraded JW3 handles like a dream!

Whether you're into licenced John Wick replicas or you love a flawlessly made Hi-Capa, the Army Armament TTI JW3 Hi-Capa Combat Master; Upgraded Version is a fantastic choice with more than its fair share of premium perks!

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform.

Whether you are building up a British Army LMG gunner loadout or you just want to increase your in game firepower, the Cybergun M249 SAW PARA would be a fine choice. The M249 PARA, also known as the L110A1 Minimi, was designed to provide a man portable light machine gun optimised for airborne troops and mechanised infantry, boasting a collapsible stock and shortened barrel to facilitate this.

This M249 is Cybergun's polymer receiver variant, meaning reduced weight with absolutely no compromises regarding performance. Like its far heavier full metal relative, the M249 PARA polymer version boasts the volume of fire optimised V249 gearbox which is reinforced and absolutely up to the task of sending out long bursts to dominate any outdoor skirmish environment. Complete with a steel bipod, 2400rnd electric auto-winding box magazine and quick detachable barrel, the M249 PARA is perfect for a more portable LMG solution!

Do you have the need to feel thunderous recoil? Nothing will do it quite like a Gas Blowback rifle! The WE G39C gas blowback rifle operates just like the real thing, with a fully moving bolt carrier which cycles back violently with each shot. The G39C boasts full metal construction despite being made predominantly from high-density polymer and can be field stripped in seconds just like the real rifle.

GBBRs aren't for the faint of heart as this rifle feeds from 30rnd real capacity magazines and needs to be operated like a real rifle; requiring cocking to load the first round. When the mag runs dry, the bolt will lock back which is your cue to reload and hit the bolt release catch inside the trigger guard. No AEG can match the realism provided by a GBBR, and with its reputation for great performance and impressive cool-down resistance, the WE G39C is the perfect tool for the experienced Airsofter who likes a challenge. Consider this a GBB pistol on steroids!

If you have your ear to the ground on Airsoft new releases you will have heard about Krytac's stunning new pistol, the first Krytac GBB pistol to hit the market! The SilencerCo Maxim 9 is a fully licenced replica, complete with immaculate SilencerCo trademarks and an absolutely flawlessly realistic look.

The Krytac Maxim 9 boasts full metal construction, an ambidextrous slide release and an ultra-ergonomic textured pistol grip with subtle finger ridges to help you control the pistol when shooting in its full auto fire mode. As it comes, the Maxim 9 is an exceptional Airsoft pistol which is sure to be very competitive in the game, and even more so now the Maxim 9 Tracer unit/Extension kit is available! 

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

Perhaps you have heard of the MK16? No, not the SCAR MK16, the other one! The ARCTURUS MK16 Saber is a near perfect replica of one of the latest and greatest custom AR platforms to come from the real steel shooting world in the US. The Saber marries ARCTURUS' high end internals with an ultra modern external look, boasting full metal construction and a large proportion of steel parts.

The MK16 Saber is a full length M4 platform with a 14.5-inch outer barrel and a steel 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, making it a beast outdoors, and perhaps even a potential DMR with the right upgrades. If you choose to challenge yourself with a long rifle indoors, you can't do much better than the Saber; its super light aluminium handguard gives you plenty of space for a nice C-clamp grip, making it easy to steer between targets at an impressive pace. No matter what you plan to do with it, the MK16 Saber from ARCTURUS would make a great addition to your armoury!

If you're into the Noveske aesthetic but want something a bit longer than the N4 Gen.3 Shorty, check out the Noveske 13.7" Gen.3 INFIDEL AEG from EMG! This carbine-length AR platform is a perfect replica of the real steel Noveske Infidel Gen.3, a cutting-edge modern rifle at the pinnacle of the real steel AR tier list.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades and a platform that is both laserbeam accurate and minigun fast!