Viewing 30 of 381.
From £109.99
  • High density polymer construction
  • 6.03mm Tightbore inner barrel
  • HAL¹  ETU Pre-installed - Programmable fire modes

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

From £109.99
  • High density polymer construction
  • 6.03mm Tightbore inner barrel
  • HAL¹  ETU Pre-installed - Programmable fire modes

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

From £109.99
  • High density polymer construction
  • 6.03mm Tightbore inner barrel
  • HAL¹  ETU Pre-installed - Programmable fire modes

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

From £119.99
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

From £119.99
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

From £119.99
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

£119.99
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

From £79.99

If you're looking to get into the sport of Airsoft and want something ready for the battlefield, this is the perfect beginner rifle for you. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easily!

The alloy version 2 gearbox the CM.507 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

This cheap AEG is a great choice for any player looking to start their Airsoft journey with a budget-friendly option that will have no trouble competing either in CQB or the wide spaces of outdoor sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to make the gun unique and truly yours. Whether this is your first step into the world of Airsoft or if you're a pro looking for a cheap project gun to customise, we are sure you will be impressed with the CM.507!

From £239.99
  • 2 Magazines included
  • VORSK's first GBB SMG platform
  • Quick Detachable suppressor included

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

From £239.99
  • 2 Magazines included
  • VORSK's first GBB SMG platform
  • Quick Detachable suppressor included

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

From £239.99
  • 2 Magazines included
  • VORSK's first GBB SMG platform
  • Quick Detachable suppressor included

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

From £99.99
Was £129.99
Save £30.00
  • Alloy slide, polymer frame
  • Licenced by Taran Tactical Innovations
  • MOSFET Pre-installed - Snappy!

If you love the John Wick look but want to skirmish in the cold, this is the JW3 pistol you need! The EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP boasts official licencing from Taran Tactical Innovation which, of course, means gorgeous authentic TTI trademarks across the design. Being an AEP, this JW3 does not have a moving slide and is powered by an internal battery, meaning solid cold-weather performance keeping it on the field long after GBBs have gone into hibernation!

As much a looker as the GBB version, the JW3 AEP is internally based around the Tokyo Marui AEP gearbox design, enhanced with steel gears running on steel ball-bearing bushings. This improves trigger response and rate of fire while giving the JW3 a much smoother firing noise than other AEPs, not to mention a longer lifespan due to reduced stress on the gearbox shell.

Also inside is CYMA's AEP MOSFET, allowing 7.4V LiPo batteries to be used for a genuinely competitive semi-auto response rate and respectable full-auto fire rate, ideal for snipers looking for a compact and reliable backup platform or pistol aficionados wanting to skirmish to full effect without worrying about GBB cool-down in winter. If you're still wearing your tux when the frost sets in, the EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP belongs in your holster!

From £264.99
  • Full metal construction
  • EAGLE™ MOSFET/ETU Pre-installed
  • FREYA™ Gen.2 - 16:1 Gearset, High torque motor
Please be aware, our current batch of Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEGs are supplied in a box marked 13". This is a mistake from the factory; inside, you'll find the correct FREYA 14" variant.

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

From £264.99
  • Full metal construction
  • EAGLE™ MOSFET/ETU Pre-installed
  • FREYA™ Gen.2 - 16:1 Gearset, High torque motor
Please be aware, our current batch of Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEGs are supplied in a box marked 13". This is a mistake from the factory; inside, you'll find the correct FREYA 14" variant.

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

From £264.99
  • Full metal construction
  • EAGLE™ MOSFET/ETU Pre-installed
  • FREYA™ Gen.2 - 16:1 Gearset, High torque motor
Please be aware, our current batch of Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEGs are supplied in a box marked 13". This is a mistake from the factory; inside, you'll find the correct FREYA 14" variant.

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

From £153.99 Pack price
Normally £169.94
Save £15.95
  • Affordable beginner bundle
  • Everything you need to get started
  • M4 SD, Battery, Charger, charging bag, BBs & eye pro!

If you're just getting into Airsoft and don't want to break the bank, our CM.513 M4 SD Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.513 M4 SD, a 1KG Bag of 0.25g BLS BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

From £94.99
Was £109.99
Save £15.00
  • 6.03mm Tightbore inner barrel
  • Available in RIF or Pre Two-Tone
  • High torque motor pre-installed

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

From £99.99
Was £109.99
Save £10.00
  • 6.03mm Tightbore inner barrel
  • Available in RIF or Pre Two-Tone
  • High torque motor pre-installed

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

From £99.99
Was £114.99
Save £15.00
  • 6.03mm Tightbore inner barrel
  • Available in RIF or Pre Two-Tone
  • High torque motor pre-installed

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

From £104.99
Was £119.99
Save £15.00
  • 6.03mm Tightbore inner barrel
  • Available in RIF or Pre Two-Tone
  • High torque motor pre-installed

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

From £109.99
  • Retractable Stock
  • Rubberised Foregrip
  • Integrated Supressor

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

From £254.99
  • Full metal construction
  • EAGLE™ MOSFET/ETU Pre-installed
  • FREYA™ Gen.2 - 16:1 Gearset, High torque motor

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

From £254.99
  • Full metal construction
  • EAGLE™ MOSFET/ETU Pre-installed
  • FREYA™ Gen.2 - 16:1 Gearset, High torque motor

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

From £254.99
  • Full metal construction
  • EAGLE™ MOSFET/ETU Pre-installed
  • FREYA™ Gen.2 - 16:1 Gearset, High torque motor

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

From £134.99
  • 6.03mm Tightbore inner barrel
  • Pre-upgraded version 2 gearbox
  • High density polymer construction

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

From £109.99
  • Licenced Desert Eagle markings
  • TM Desert Eagle based design
  • Comes in a hard storage case

If you are a baller on a budget, this will interest you! The latest Desert Eagle Airsoft GBB pistol from Cyber Gun has its sights set on the beginners' market, aiming squarely at keeping the realistic Desert Eagle firing experience in a full polymer pistol. This Desert Eagle is based on the original Tokyo Marui Desert Eagle design and boasts the same strong blowback feel and intense recoil that can only come from a Desert Eagle GBB, but is considerably less of a burden on the wallet than other options, and comes in its own nifty hard storage case!

From £109.99
  • Licenced Desert Eagle markings
  • TM Desert Eagle based design
  • Comes in a hard storage case

If you are a baller on a budget, this will interest you! The latest Desert Eagle Airsoft GBB pistol from Cyber Gun has its sights set on the beginners' market, aiming squarely at keeping the realistic Desert Eagle firing experience in a full polymer pistol. This Desert Eagle is based on the original Tokyo Marui Desert Eagle design and boasts the same strong blowback feel and intense recoil that can only come from a Desert Eagle GBB, but is considerably less of a burden on the wallet than other options, and comes in its own nifty hard storage case!

From £99.99
Was £109.99
Save £10.00
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Pre-installed slide mounted red dot sight

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

From £154.99
  • 6.03mm Tightbore inner barrel
  • High density polymer construction
  • EAGLE™ Programmable MOSFET pre-installed

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

From £119.99
  • High-density polymer/CNC alu handguard
  • Keymod handguard
  • HAL¹ ETU Pre-installed - Programmable fire modes

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. 

This, the latest version of the SA-C08 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

Airsoft Beginner Guns at Patrol Base

There is no best beginner Airsoft rifle; it's not a one-size-fits-all hobby. The best Airsoft starter kit is personal to you, based on your budget, style and where you plan to play. At Patrol Base, you can choose from Assault Rifles, SMGs, Pistols and much more. Explore our range of new player-friendly Airsoft replicas and start your new hobby today!

Important things to consider when looking for a beginner replica are its weight, size, style and price, make sure they match your interests for maximum fun. To go along with your new starter platform, you should look at getting a couple of spare magazines, suitable eye protectionBBs and a power source - such as a battery and charger for an AEG or a bottle of Airsoft gas for Gas Pistols.

As well as beginner guns, you’ll also find all the other new player Airsoft essentials such as BBs, tactical clothing, pistol holsters, Airsoft grenades and more. We offer 24-hour UK Dispatch and Pay Later options with Klarna, so you can get everything you need in no time.

Shop your airsoft beginner kit with Patrol Base UK today. If you're interested in reading more about Airsofting and getting to grips with the basics, check our our handy and insightful Airsoft Beginner Guide.