Delta Armory Airsoft

If you're looking for an affordable long-range AR with a unique modern look, the DA-B12 BRAVO™ from Delta Armory is one to watch. This M4/AR-15 AEG is based on real steel LVOA-style AR-15s, boasting a 16.2-inch outer barrel and handguard along with an equally long 6.03mm tightbore inner barrel, ideal for outdoor skirmishing or a DMR build. 

Inside the DA-B12, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. 

The result is an AEG which shoots far better than one would expect for the price with full TM compatibility for the upgrade addicts. Whether you just wack a big scope on it and get to work or you build it out into a fully-fledged DMR, the DA-B12 makes a fantastic outdoors platform! 

If you've been checking out MK18 MOD.1 AEG platforms, the Delta Armory DA-A07-ETU ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic option to weigh up. This MK18 MOD.1 AEG adds an enhanced receiver to the Milspec MK18 mix, providing a tasty combination of a proven design with extra consideration given to ergonomics and handling. 

Being an AEG of the ALPHA™ line, this beast boasts full metal construction and the best internals Delta Armory has to offer, including the impressive programmable MOSFET/ETU system. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The ETU expands on these superb internals by allowing for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. 

If a MK18 MOD.1 will be your next buy, you have one heck of a decision to make! If you like advanced internals to go with the MK18 aesthetic, you cannot go wrong with the DA-A07-ETU ALPHA™ from Delta Armory!

If you're looking for affordable 0.28g tracer BBs, the Delta Armory 0.28g 6mm Tracer BBs are a great call. Supplied in a 1KG bulk bag containing approximately 3571 BBs, Delta's 0.28g tracers glow green when shot through an Airsoft tracer unit, giving you an instinct aiming advantage, particularly in low-light situations. 

These BBs weigh 0.28g, making them ideal for outdoor skirmishes and long-range engagements with Airsoft guns with upgraded HOP-up parts. Despite being some of the cheapest tracer BBs on the market, the Delta Armory 0.28g tracers have very tight tolerances, measuring 5.95mm +/- 0.01mm which is great for accuracy and consistency. If you need 0.28g tracers to light the enemy up at long range, the Delta Armory 0.28g 6mm Tracer BBs will do exactly that!

If you have a night game in the great outdoors or you run 0.28g BBs in a tracer-equipped platform in CQB, Delta Armory 0.28g Diamond 6mm BIO Tracer BBs should be on your shopping list! These BBs are supplied in a 1KG resealable bag of 3571 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

When shot through a tracer unit, these BBs will illuminate in bright green so you can see where your shots land and adjust accordingly. Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 

If you like the integrally suppressed AR look but want something pre-upgraded with more competitive internals than the average, the Delta Armory DA-C05-ETU CHARLIE™ M4/AR-15 Silent Ops 7 AEG is the one. This is the ETU-equipped version of the DA-C05 Silent Ops 7, boasting the same strong high density polymer build but with the best internals Delta has to offer currently.

Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response

This marriage of a lightweight beginner-friendly build with top-notch internals makes this a beast of a backup AEG, and perfect for a new or younger skirmisher who seeks no compromise when it comes to performance. If sneaky ARs are your thing, the DA-C05-ETU Silent Ops 7 will see you well-equipped!

If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!

The set includes the DA-B04, 2 extra 140rnd Mid-caps, a JPC Tactical Vest, a pair of NUPROL Pro Mesh Goggles, a NUPROL Tactical Half Face Mask, a speed loader, 3300 ASG Devil Blaster 0.25g BBs, a LiPo battery, a LiPo balance charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go! 

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries. 

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you have a taste for the classic Military configurations but move fast or primarily play CQB, this bundle should suit you perfectly! The CHARLIE™ M4 CQBR Bundle pairs the DA-C02 CHARLIE™ CQBR with 2 extra spare magazines, a speed loader, a LiPo battery, a smart charger and a battery charging bag. All you need now is your choice of eye/face protection and some BBs to shoot! We recommend 0.25g BBs for a good balance between affordability and performance. 

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals. 

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

If you're looking for high-grade tracer BBs, the Delta Armory 0.25g Diamond 6mm Tracer BBs are the right tool for the job. Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential. These are the tracer versions and will glow brightly when shot through an Airsoft gun with a tracer unit, adding an instinct aiming and psychological warfare advantage, especially up close!

If you want to start your Airsoft journey with something that shoots a little better than the usual beginner platform, this bundle is ideal. The Silent OPS CQB Bundle is based around the pre-upgraded DA-B03-ETU with its integral suppressor, hybrid aluminium/high-density polymer build and programmable fire controls including burst mode, pre-cocking and binary trigger. 

We paired the DA-B03-ETU with 2 spare mags and a speed loader so you can keep it topped up, a Red Dot Sight for fast target acquisition (lens protector recommended) and a LiPo battery, charger and charging bag to keep it fueled up.

This setup would be ideal for a sneaky CQB specialist or an aggressive outdoors skirmisher who wants to start with the edge over other newcomers. The DA-B03-ETU is a cut above standard beginner AEGs thanks to its electronic trigger unit which gives it a frightening semi-auto trigger response and killer rate of fire!

If you're after an MK18 and a full complement of accessories, this is what you need! The Delta Armory MK18 BRAVO™ Binary Bundle pairs the Delta Armory DA-B15-ETU MK18 with 2 extra magazines, a red dot sight (lens protector recommended), BBs, a speed loader, LiPo battery, charger, and a battery charging bag, giving you everything you need to get going with a slick Military style setup!

This bundle is named for the Binary Trigger function of the pre-installed ETU system inside the MK18, though it can also provide burst mode and pre-cocking for a faster trigger response. If you do a mix of indoor and outdoor skirmishing, this setup will see you well-equipped!

If you're looking for a rock-solid DMR base gun with real-world foundations and pre-upgraded internals, check out the Delta Armory PROARMS® PAR MK3 16". This full metal M4/AR-15 AEG platform is based on the real PROARMS PAR MK3, a cutting-edge AR-15 platform which simply cannot be built from Airsoft aftermarket parts. 

Like the real thing, the majority of the Delta PAR externals are constructed from CNC 6063 aluminium, sidestepping the usual Airsoft alloy for a stronger, more long-lasting external build. As we might expect, the machining quality is absolutely flawless, as are the authentic licenced PROARMS trademarks precisely engraved on each side of the modernised receiver. 

At the heart of the PAR MK3, we are treated to Delta Armory ALPHA ETU series internals, meaning reinforced SHS parts sit side by side with a CNC aluminium piston head and cylinder head and a CNC steel spring guide and cylinder, powered by a high torque Neodymium magnet motor and kept in check by the Delta Armory programmable ETU/MOSFET system. Whether you build it out into a high FPS DMR or keep it stock, the Delta Armory PROARMS® PAR MK3 16" will be an asset to any long-range objective!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you love the looks of the DA-C05 Silent Ops but wish it was longer with more metal parts, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG is just what you need! BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

The Silent Ops 9" is rocking a quad rail handguard styled after the KAC Freefloat RIS paired with a suppressor hidden beneath, giving it the stealthy styling of shorter suppressed ARs with enough length to hide a 400mm 6.03mm tightbore inner barrel inside for maximum long range effect. The tightbore is paired with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, resulting in a build focussed on reliability and strength with a slight accuracy advantage for good measure!

Whether you're looking for a DMR base gun or a long-barreled AR platform which won't weigh you down, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG will suit your needs perfectly!

If you're in search of a new CQB platform or a compact PDW-style AR for your quick and slick playstyle, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG should be high on your list of options. This full-metal M4 platform boasts an extremely compact front end, ideal for close-quarters skirmishes or woodland warriors who prefer to move fast with a bite-sized M4 with full-sized firepower. 

Being an AEG of the ALPHA™ range, this beast boasts pre-upgraded internals and a high-quality metal receiver paired with a  CNC aluminium handguard and micro suppressor. Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness despite its short overall length. 

If your aim is to refute the "size matters" philosophy and prove it truly is how you use it, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG is the perfect AEG to do it!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode. 

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you're in search of an M-LOK-equipped AR AEG packed with pre-upgraded parts, the Delta Armory DA-B13-ETU BRAVO™ M4/AR-15 M-LOK AEG is one to watch. Like Delta's other BRAVO™ like offerings, the DA-B13-ETU boasts a CNC aluminium handguard and high density polymer receiver, giving you a great combination of realism and low weight. The handguard is rocking M-LOK slots at the 3, 6 & 9 o'clock positions and a 20mm Picatinny rail up top, ready for whatever accessories you need to complete your mission. 

Delta's ETU AEGs are even more upgraded than the standard BRAVO™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These pre-upgraded internals give the DA-B13-ETU a super snappy trigger response and raised rate of fire from the combination of improved efficiency via the ETU and faster mechanical cycling via the high-speed gearset. 

If you need a handy platform with beastly internals at the perfect length for aggressive, fast-moving playstyles, the DA-B13-ETU from Delta Armory will be an asset to your game!

If you're looking for a modernised full metal M4A1, the DA-A02-ETU ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts Delta Armory's best internals yet, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 16:1 steel gears and a high torque motor, backed up by the Delta Armory programmable MOSFET/ETU system. The Delta ETU offers the option for burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

On the outside Delta has added a gunfighter mod.3 style pistol grip, a slimline crane-style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a refresh without ruining its iconic outline and maintaining suitability for both casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02-ETU ALPHA™ M4A1 RAS AEG is ideal!

If you have the itch for a new AR but you want something rare, the Delta Armory PROARMS® PAR MK3 AEG is exactly that. Based on the real steel PROARMS® PAR MK3, this full-metal AEG is constructed with a CNC 6063 aluminium receiver and handguard and is equipped internally with the same fantastic pre-upgraded parts as the Delta Armory ALPHA ETU series. 

This means we are treated to a 6.03mm tightbore inner barrel, rotary HOP-up unit, SHS piston and tappet plate, a high torque motor and the Delta Armory programmable ETU, allowing for burst mode, binary trigger and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, pre-upgraded internals and build quality that is a cut above the usual full metal M4, the Delta Armory PROARMS® PAR MK3 10" is one to watch!

If you're looking at high-end AR options and you want something rare, the Delta Armory PROARMS® PAR MK3 14.5" M4/AR-15 AEG is worthy of your scrutiny! This cutting-edge modern AR design boasts more than its fair share of perks when compared to other M4/AR-15 platforms, most notably its CNC aluminium receiver and handguard, mimicking the real PAR with its angled receiver surfaces and super-modern look perfectly. If you can call any AR-15-derived rifle unique, it's this one!

On the inside, we are treated to Delta Armory ALPHA ETU internals, featuring SHS reinforced parts, a CNC steel spring guide and cylinder, a CNC aluminium piston head and cylinder head and a mighty high torque Neodymium magnet motor, backed up by the advanced Delta Armory ETU/MOSFET. If a rarely-seen AR with top-notch performance is what you need to expand your arsenal, the Delta Armory PAR MK3 is the right call!

If you appreciate a well-built, unique AR platform bristling with pre-upgraded parts, the Delta Armory DA-PAR-12 PROARMS® PAR MK3 12" fits the bill. This uniquely styled AR platform is built like a tank, boasting a CNC 6063 aluminium handguard and receiver with immaculate licenced PROARMS trademarks and the uniquely modern PROARMS receiver design. 

The fun doesn't end on the outside, either. Internally, we are treated to the top of the line when it comes to Delta Armory internals, including a high torque motor, 6.03mm tightbore inner barrel, SHS piston and tappet plate combo and CNC aluminium cylinder group parts. 

The cream of the crop is the Delta Armory ETU/MOSFET system which offers programmable fire controls including burst mode, binary trigger and adjustable pre-cocking along with protecting from power surges and warning you when your battery's voltage drops too low. For an advanced exterior and equally advanced internals, the Delta Armory PROARMS® PAR MK3 12" is what you need!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking. 

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding. 

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!