EU Warehouse Stock

If you are getting a bit hot under the collar wearing a plate carrier when skirmishing in summer, or you want a rig that combines flexibility and low weight for a high speed CQB loadout the 8Fields Tactical Buckle Up/MOLLE chest rig would be ideal. This chest rig is constructed from 1000 denier Polyester giving it strength and water resistance thanks to its high stitch density. If you use a buckle-up plate carrier as your primary rig, this chest rig can make a great alternative for summer skirmishing, allowing you to quickly move your buckle-up front panel from plate carrier to chest rig and benefit from better cooling and more airflow.

If you are getting a bit hot under the collar wearing a plate carrier when skirmishing in summer, or you want a rig that combines flexibility and low weight for a high speed CQB loadout the 8Fields Tactical Buckle Up/MOLLE chest rig would be ideal. This chest rig is constructed from 1000 denier Polyester giving it strength and water resistance thanks to its high stitch density. If you use a buckle-up plate carrier as your primary rig, this chest rig can make a great alternative for summer skirmishing, allowing you to quickly move your buckle-up front panel from plate carrier to chest rig and benefit from better cooling and more airflow.

The Military Knee and Elbow Pads set from EmersonGear provide heavily padded externally worn knee and elbow protection, with polymer reinforcement on the exterior. The pads are secured via one elastic strap and one nylon strap, allowing you a decent amount of flexibility when running and preventing the pads from slipping down. One of the best features of these pads is the extended section below the polymer reinforcement, which functions to protect your forearm/shin and help ensure your knee/elbow is protected should the pads shift. The polymer reinforcement on the outside also facilitates knee sliding, if you are the "showy" type!

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

A Velcro-secured holder for 6 x Airsoft Shotgun Shells which can attach anywhere that has a free space of Velcro available, and has six elasticated loops for Shotgun Shells, Pyro and other similarly sized articles.

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! 

This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. 

To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.

The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.

Keep your mags safe with the 8Fields Tactical Buckle Up Triple AK/Pistol Magazine Pouch Panel. This panel offers 5x AK47 magazine pouches, 2 of which are double stacked and are retained via elasticated loops, in addition to 2x pistol magazine pouches, retained by Velcro flap covers.

The panel features MOLLE loops on the front of the AK pouches for additional with the panel itself being held in place by 2x heavy duty polymer clips and a Velcro rear, which means that your mags are kept safe and secure with easy access at all times.

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!

Now here's a shotgun with some serious functionality for all you operators out there, looking to dominate any CQB environment

With it's satisfying pump action, tri shot spread, this shotty lets you deal with any potential insurgents with ease.

Also featured are raised sighs for that extra bit of accuracy and adjustable, rotating stock that can be set to your build and playstyle, with it's lightweight build and manoeuvrable playstyle, while still pack some heat!

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

If you are after the latest and greatest bump helmet available, you have found it! Complete with the latest variant of the ARC helmet accessory rails and an alloy insert in the pre-installed NVG/ action camera mount, the Next-generation Spec-Ops bump helmet is ready to be tarted up to suit your loadout!

If you are after the latest and greatest bump helmet available, you have found it! Complete with the latest variant of the ARC helmet accessory rails and an alloy insert in the pre-installed NVG/ action camera mount, the Next-generation Spec-Ops bump helmet is ready to be tarted up to suit your loadout!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

Looking for a solution to quick radio adjustment on the fly? This Open-Top MOLLE Radio Pouch from 8Fields Tactical allows you to securely store your radio on your rig with full access to any controls on the top, and controls on either side. Comms during skirmishing are important, something 8Fields understands with their quality pouch.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

An Airsoft modular rail panel designed to fit onto KeyMod hand guards, providing a 2'' 20mm RIS / RAS rail. The product comes as a kit and is easily built and can quickly be installed to KeyMod hand guards to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is a perfect purchase for any Airsoft player who has got their hands on a new rifle and is looking to take their gun to the next level by attaching parts and accessories.