EU Warehouse Stock

If you're running a P90 and want to spice it up a notch, the Perun Optical MOSFET/ETU for P90 AEG is what you need to take your P90 to the next level. This advanced MOSFET/ETU uses optical sensors to speed up your P90 and provide programmable functions, including burst mode, binary trigger, adjustable active braking, adjustable pre-cocking, trigger sensitivity adjustment and compatibility with dual sector gear setups. 

Make no mistake, this MOSFET rivals the incredible Gate TITAN and ASTER series in the functions and performance it provides. Unlike the Gate 'fets, the Perun is designed specifically for TM P90-based AEGs, meaning no compatibility worries and a relatively easy installation process. If you want your P90 to shoot like an upgraded M4 platform, this is how you do it!

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength. 

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines. 

LAYLAX - PSS10 VSR10 Spring - is a spring designed by LAYLAX for VSR bolt action sniper rifles and other compatible platforms.

If you don't want to overheat but you also don't want those painful hand shots, the 8Fields Tactical Shooting Gloves should keep your hands relatively cool while providing plenty of protection. These gloves are constructed with a microfibre mesh upper and synthetic leather palm, giving you a great balance of breathability and strength. The wrists are adjustable and elasticated and are retained by velcro to keep the gloves as snug as you need them. If you need a pair of lightweight, low-profile gloves for either hot weather skirmishing or extra dexterity, the 8Fields Tactical Shooting Gloves will do the trick!

Building a gearbox from scratch? You'll need a shell to get started! The ARCTURUS Version 3 Alloy Gearbox Shell is a reinforced design with a radiused cylinder window, additional material surrounding the cylinder for extra strength and 8mm bearing holes. The rear of the gearbox is also cut for a quick change spring guide. 

The version 3 shell is common to AK, AUG, AR36 and SMG-5K AEGs (not the regular SMG-5, though) so if you need a gearbox shell for any of these platforms this one will be compatible in most cases. 

This one's for all you AK lovers looking to treat your rifle to a new receiver and stock. Constructed entirely from durable steel, this will undoubtedly give you AK a nice sturdy feel with a good weight balance. The stock itself is skeletonised to keep the weight balance and to allow it to fold into the receiver and lock in place with a latch.

The receiver has all the hallmarks of a classic AK body, with its signature level style mag release and angular trigger guard and is even complete with the iconic AK dovetail side mount, to which you can attach the tactical accessories of your choice.

Whether your looking to spruce up your AK47 with a new receiver and folding stock, or fancy creating some Frankenstein's monster of a rifle by attaching this to a non Russian rifle (we won't judge), this solid piece of gear is a great buy at the price.

If you need a new nozzle for your CYMA CM.057 or Real Sword Dragonov SVD, CYMA has you covered! The Aluminium Nozzle for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and compatible with the CYMA CM.057 SVD/SVU AEG series and the Real Sword Dragunov SVD AEG. 

This is a replacement original part specifically designed for the Real Sword pattern SVD gearbox used in the CYMA CM.057 series and is not compatible with A&K SVDs or others. If you've built a beast of a DMR with your SVD and you want to get ahead of any potential parts failures this is a great part to have in the toolbox!

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

If you are having trigger issues with your ARCTURUS AK AEG this replacement original part set should cure it! The ARCTURUS Microswitch V3 for ARCTURUS AK series includes the microswitch itself, a Deans/T-plug battery connector and spade connectors all wired together for a relatively simple installation procedure. The set should not require soldering to install, but as always, we recommend a certain level of confidence and expertise if you plan on installing this part.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your AEG running for longer at high speed thanks to its reinforced polymer construction. 

Does your plate carrier get a bit hot and sweaty in summer? If so, the Skeletal Cummerbund with QR system from EmersonGear could be the solution to your temperature issues. This cummerbund is designed to replace the original cummerbund on most plate carriers which use a Velcro secured cummerbund, and provide skeletonised sides for better airflow and a quick-release system, so you can get your carrier off quickly and cool down after the skirmish! This cummerbund attaches via velcro at the front, and elastic cord at the rear.

This 8Fields gun bag is designed to accommodate one full size Airsoft rifle, and one smaller SMG type gun in the smaller compartment, and space for tools and accessories in the two side sections. With its 1000D Polyester construction and water proofing, this is the perfect case for those with multiple AEGs looking for a robust case to transport them.

Take your shooting to the next level with the Perun Front Wired MOSFET V2 Hybrid, which gives you access to many advanced features such as adjustable trigger sensitivity, active brake, binary trigger, system diagnostics and many more!

The unit is a drop in MOSFET, meaning that it is far easier to install than many other MOSFETS and you won't need to modify your gearbox in the majority of cases, do be aware we recommend this for experienced technicians only.

If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!

The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function

If you have seen the impressive performance of the EU series of GBB pistols, but you have also seen the way they look and you aren't a fan, Double Eagle has something you may appreciate! The Double Eagle JDG Polymer 80 PFS9 GBB pistol takes the superb EU series internals and puts them inside a slide and frame with a dynamic modern look. The PFS9 sports an aggressively textured pistol grip, a 20mm Picatinny frame rail, an optics ready slide and an 11mm CW threaded barrel, making the pistol ready for any task you set for it. This GBB pistol is based on the real PFS9 which is quickly rising in popularity in the US, and its redesigned "Polymer 80" frame.

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

An adjustable magnified telescopic sight for Airsoft weapons, featuring a 32mm lens, with variable 3x to 9x magnification. The scope is constructed from Alloy and comes with removable covers to protect the lenses when not in use. 

A B10 Style tactical lower AK handguard, designed to allow you to expand the versatility and modularity of your Airsoft AK by providing a 20mm lower and side rail for the addition of Foregrips and Laser / Light modules and any other accessories to suit your playstyle.

Looking for a lightweight, simple and small profile method of keeping your pistol mag safe and accessible at all times? Look no further!

This elastic insert is perfectly sized to house a range of pistol magazines and can be attached anywhere on your loadout with some spare Velcro so you can customise your setup to how you play. Fits to kangaroo pouches of a lot of plate carriers and also features front facing Velcro.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

If you like to shoot a lot you will need an affordable source of BBs to keep the bank balance healthy! The PJ PROSLICK 0.20g 6mm BBs are provided in a resealable bag which holds approximately 4000BBs, complete with a resealable easy pour opening to minimise spillages. With tight tolerances of +/- 0.01mm and a polished surface for smooth feeding, these BBs are a great value alternative with no compromises when it comes to in game performance!

If you want to push your VSR-10-based sniper rifle to the absolute pinnacle of accuracy, a TDC mod should do the trick! The Hades Airsoft TDC HOP-up Unit Set for VSR-10 Sniper Rifle is designed to replace the original HOP-up arm and adjuster, providing direct pressure to the top of the HOP-up nub and bucking to eliminate side-to-side shot deviation.

Installing this TDC unit will require some extensive, irreversible modifications to your base sniper rifle, so we only recommend this set for those who are confident with power tools and have a decent level of Airsoft technical knowledge.

The unit requires you to drill a hole through the top of your outer barrel using either a 5mm or 5.5mm drill bit and the included drill guide, inserting the guide into the stripped outer barrel to ensure the hole is drilled in the right place. Hades also recommends that when the modification is complete, that you glue the TDC unit to your outer barrel using super glue or another strong adhesive.

If you are the type of sniper that likes to get their hands dirty with modifications and you want your VSR to outrange and outshoot the rest, this kit will do it!

A replacement or spare Gas Tank for the Golden Eagle Type 870 Series M870 Gas Airsoft Shotguns. Made to the original specifications, this Gas Tank will pop into the Stock of a Type 870 Series M870 Gas Shotgun and keep you in the fight for longer. If you own a Gas Golden Eagle M870 and want to carry Spare Tanks rather than a large Bottle of Gas in the field, then these Gas Tank replacements are ideal for you.

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you need a slim stick battery for your ASG Scorpion, M4/AR-15 AEG buffer tube or top-wired AK AEG this will do the trick! The Gen's Ace 7.4v 1500mAh 25C LiPo Stick Battery measures approximately 12x1.5x1.6cm which makes it perfect for rear wired M4 platforms with the standard buffer tube battery compartment, top wired AKs which house their battery beneath the top cover and SMG-5K platforms. The battery is pre-wired to a Mini-Tamiya connector and the length of wire between the cell group and the connector is approximately 6cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C, making it great for almost any Airsoft AEG and a perfect fit for the ASG Scorpion EVO 3A1, though make sure you measure before ordering!

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

If you have been looking for an affordable sidearm or base gun for your next build, the Golden Eagle Hi-capa 4.3 GBB is a fantastic choice. This Hi-capa boasts full metal construction, full Tokyo Marui compatibility and a price that is hard to believe!

Though it is based on the Tokyo Marui 4.3, the Golden Eagle Hi-capa has a 6.02mm tightbore inner barrel, adding to its accuracy potential, improving gas efficiency and raising FPS slightly. Golden Eagle also saw fit to add an 11mm CW female threaded outer barrel, meaning you don't need a new outer barrel to fit a tracer or suppressor, just an 11mm CW to 14mm CCW adapter. Unlike many other cheap GBB pistols, the Golden Eagle Hi-capa feels buttery smooth when cycling and is remarkably consistent, pointing to well-made internals and tight tolerances.

Whether you are building it out for speedsoft use or you want a cheap, full metal holster filler, the Golden Eagle Hi-capa is a great value and a great performer!