Two-Tone Airsoft Assault Rifles

At long last, the humble AR36 platform has received the attention it deserves! This stunning replica features the finest construction materials, an updated combo handguard and an Earth-shattering electric blowback function. 

At long last, the humble AR36 platform has received the attention it deserves! This stunning replica features the finest construction materials, an updated combo handguard and an Earth-shattering electric blowback function. 

An Airsoft 6mm BB Gun which takes a base platform M4, then adds a fancy Handguard System to give this AEG a unique look and feel. This M4 replica is constructed mainly from Polymer, with a Polymer Receiver, Stock, Buffer Tube, Handguard, Flash Hider and Sights, with an Alloy Outer Barrel and Internals.

For those looking for an AR36 that can be kitted out like a railed M4, the G608-7 would be a great choice. This AR36C has had some external upgrades added to give it a unique look and some enviable functionality, with 20mm Picatinny rails available wherever they are needed, and a pre-installed suppressor which is partially covered by the handguard for a sneaky special forces inspired look. This AR36 can also boast "full metal construction", despite being made mostly from polymer as its metal-to-polymer proportions match the real rifle perfectly. If you want something other than a boring old M4 that doesn't compromise on modularity or customizability and sports fully ambidextrous controls, this is it! 

If you are keeping your eye out for a modernised 416 style AEG platform, the Specna Arms SA-H12 ONE™ Carbine would be a fantastic choice. As part of Specna Arms' ONE™ range, the SA-H12 boasts full metal construction and flawless sand blasted and anodised finish across all parts, offering you the choice of tactical black or stylish and modern multi-bronze finish, matching the real rifle perfectly. 

On the inside, the SA-H12 is equally impressive, with a reinforced version 2 gearbox equipped with steel gears, 8mm ball bearing bushings, a steel spring guide and the Enter & Convert quick change spring system, allowing for quick and easy power tuning without opening the gearbox. 

The most recent batch of SA-H12s has also been upgraded with the latest rotary HOP-up unit design for the M4/AR-15 platform, offering finer increments of adjustment and improved ability to hold its setting under the vibrations of full auto fire. All of the internals are Tokyo Marui AEG spec, opening up almost limitless upgrade potential, from adding a MOSFET to an HPA engine. If you are after a 416 but want something slicker and quicker than the usual quad-railed configuration, the SA-H12 ONE™ is the one to go for!

The Specna Arms SA-H03 is a full Zinc/Aluminium Alloy electric powered Airsoft replica of a popular 'Special Forces' favourite. Internally and externally, Specna Arms haven't compromised on quality at any point.

An electric powered replica of the classic M4A1 platform, complete with a shorter barrel than standard. The Specna Arms EDGE series of replicas has loads of features that set them apart from any other out-of-the-box AEG.

Perfect for CQB combat and manoeuvrability, the Arcturus AT-ST01 sports an ultra-light full polymer build complete with a slimline 10-inch hybrid M-LOK and Picatinny handguard, that offers you the best of both worlds, ready for any type of attachment you can throw at it.

The rifle also features a full length monolithic top rail and sling plate in addition to slimline low-profile stock, which further keeps you agile on your feet in tight spaces. This AEG has everything you'd hope for in a modern AR, especially in a fast-paced CQB environment.

Perfect for CQB combat and manoeuvrability, the Arcturus AT-ST01 sports an ultra-light full polymer build complete with a slimline 10-inch hybrid M-LOK and Picatinny handguard, that offers you the best of both worlds, ready for any type of attachment you can throw at it.

The rifle also features a full length monolithic top rail and sling plate in addition to slimline low-profile stock, which further keeps you agile on your feet in tight spaces. This AEG has everything you'd hope for in a modern AR, especially in a fast-paced CQB environment.

Introducing the latest version of the Evolution Airsoft E-416 AEG, sporting the usual Evolution Airsoft upgraded internals, now with their latest ETU, the ETS III pre-installed. The E-416 is equipped with a high torque motor, 6.01mm tight bore inner barrel with the latest rotary adjustable HOP-up unit, and a quick change spring system, granting you flexibility without having to mess with the finely tuned internals. The ETS III adds some major functionality to the platform, enabling a plethora of advanced functions including burst mode, binary trigger and ramping automatic fire, all of which can be programmed using the fire controls on the weapon itself.

If you can't decide whether you want something modern or an AK, with the CYMA CM.103 AK Alfa you can have both! This AK has been modernised throughout to the point that it is barely recognisable as an AK, boasting an advanced side folding retractable stock similar to SCAR and ACR stocks, an aluminium monolithic upper receiver, plenty of 20mm Picatinny rails and ambidextrous controls across the design, allowing it to go toe to toe with the most modern platforms available to Airsofters.

As one of CYMA's Platinium Edition AEGs, the CM.103 is equipped with CYMA's pre-upgraded Platinum Edition gearbox, featuring 13:1 ratio high speed CNC steel gears, a high torque motor, and a MOSFET to allow for 11.1V battery use. The MOSFET also improves electrical efficiency which translates to even better performance down range and the high rate of fire and trigger response it provides pairs perfectly with the 6.03mm tightbore inner barrel and alloy HOP-up unit to create a true beast in the performance department.

If you are looking for a uniquely styled Airsoft AEG which hybridizes modern SCAR like construction with AK mag compatibility and CYMA Platinum performance, the CM.103 AK Alfa does all that while confusing even the veterans and drawing the eye of curious skirmishers wondering what on earth it is!

If you love the standard issue US Army M4A1 carbine, this should suit you! The Delta Armory DA-C03 CHARLIE™ M4A1 RAS AEG is styled after the M4A1 as it is issued to the US Army, featuring a RAS style quad 20mm railed handguard, M4A1 barrel profile with M203 cutout and the iconic AR-15 triangular front sight, along with some thoughtful modern ergonomic enhancements to improve handling. 

On the outside, Delta has added a gunfighter mod.3 style ergonomic pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C03 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight and maintain peak agility in game. 

On the inside, the DA-C03 is kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. Needless to say, this platform is superb value considering its features and is the perfect AEG for a new skirmisher who wants a cost-effective primary without any performance compromises!

If you are looking for a starting point for a Milsim appropriate DMR rifle, you have found one of the best options! The Double Bell MK12 MOD.0 SPR is modelled closely on the real MK12 MOD.0 Special Purpose Rifle issued to the special operations forces of both the US Army and US Navy. This rifle features an 18-inch outer barrel with an OPS Inc. style muzzle brake, a PRI Gen2 style free-floated tubular handguard with removable rail sections and an ARMs style "Swan" rail riser sleeve, making it a perfect match for DMR rifles issued to USSOCOM during the global war on terror era.

CQB Experts and ARP9 fans, you're going to want to check this out! The ARP556 3.0 is here, bringing the same energetic performance as the ARP9 3.0 but with a 5.56 style receiver for compatibility with standard M4/AR-15 magazines. If you held out on the ARP9 3.0 because you don't want to buy more mags, get this one, it's just as epic!

Inside the ARP556 3.0, you will find a generous selection of pre-upgraded parts, including G&G's new MOSFET integrated gearbox, known as the "MIG". The MIG features G&G's new MOSFET system which is smaller and more efficient than ever before, and a QD spring guide to allow for easy power tuning without needing to take the gearbox apart. Other innovations include a new side folding stock system, known as the CHFS, and a new double-feed magazine. The other awesome G&G pre-upgraded internals remain, including the epic 25,000 RPM high speed motor which is ready to provide the thunderous rate of fire the ARP9 and ARP556 are known for.

If you're searching for the ideal CQB primary, this is practically it. With a bite-sized external form but king-size performance, the ARP556 3.0 is a piece to contend with up close and will be an asset to any aggressive outdoors skirmisher who values an intense rate of fire and lightweight yet rock-solid build!

For those of you that like going Commando! Lancer's M933 is a replica of the lesser-seen Commando length M4/AR15, rocking a tightbore inner barrel, quick change spring system and threaded outer barrel as well as adjustable stock and removable railed sights. Bridging the gap between outdoor and CQB environments.

For those of you that like going Commando! Lancer's M933 is a replica of the lesser-seen Commando length M4/AR15, rocking a tightbore inner barrel, quick change spring system and threaded outer barrel as well as adjustable stock and removable railed sights. Bridging the gap between outdoor and CQB environments.

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

Fans of the SR-25 platform rejoice! This Airsoft Electric Gun is the finest replica of the firearm we have seen without breaking the bank or doing a tonne of modification out of the box. Featuring a MOSFET, Microswitch Trigger and Quick Change Spring to name a few, this is the perfect out-of-the-box gun.

This Airsoft Electric Gun is based on the M4A4 Assault Rifle and features a 'Superlite Carbontech' Polymer material that is tough, looks and feels great to the touch and provides a decent balance between realism and overall weight. With amazing features like a Quick Remove Spring Guide, cutout-slot for a MOSFET or Electronic Trigger Unit, Steel Gears and other uprated internals, this AEG represents serious value for money. Whether you're brand new or been in the game for decades, you don't want to miss out on the Evolution Airsoft Recon S MK18 Mod 0 Carbontech.

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

Based off the rifle length M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms as part of their CORE beginner rifles range.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

Entirely ambidextrous controls on an AR platform, giving the ultimate in usability to every shooter. The Perfect length for CQB and still a fantastic performer outside too.

If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it.

On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed. 

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs. 

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

If you have been on the lookout for an affordable starting point for a DMR build project, or you are working on your Vietnam war or Blackhawk Down loadout, the JG1401 will be of interest! This M14 AEG sports full metal construction, and is patterned after the superb Tokyo Marui M14 AEG with its excellent "V-HOP", extremely long barrel and marksman rifle style good looks.

Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism. 

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed. 

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs. 

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

This AKM Platform Airsoft Gun is powered by a battery in the stock and features realistic construction with Real Wood Furniture, as well as a Dovetail Side Rail for AK specific attachments.