Full Metal Airsoft Guns

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 19X. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

If you like a slick, licenced Hi-Capa platform, the EMG STACCATO series should be right up your street! This, the R618 STACCATO 2011 Hi-Capa XC is based on the real steel STACCATO 2011 XC, boasting full metal construction, a pre-installed compensator and official licencing from STACCATO Firearms via EMG and 6mm Pro Shop. This, of course, means full trademarks across the design and unrivalled authenticity; perfect for realism fans!

On the inside, the STACCATO XC is based around the Tokyo Marui Hi-Capa internal system, which should mean most aftermarket upgrades will be compatible, potentially with some fitting required. As it comes, the XC is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability, meaning it is a bit of a beast straight out of the box! If you're in search of a unique Hi-Capa with high-end styling and a respectable real steel pedigree, the EMG R618 STACCATO 2011 Hi-Capa XC belongs on your belt!

If you're in the market for a new CQB primary and need a full metal build with a fancy programmable MOSFET, your standards are certainly high! Lucky for you, Delta Armory has what you need with the DA-A18-EGL ALPHA™ TALOS 3 PDW M4/AR-15 AEG!

This full metal M4/AR-15 AEG boasts full metal externals with the ultra-modern Delta Armory receiver design, a sleek and compact PDW stock and the Delta Armory EAGLE™ programmable MOSFET at the heart of the internals, offering the option of burst mode, binary trigger, semi-auto only, sniper delay, progressive trigger (AUG mode), precocking and trigger sensitivity adjustment. A seriously advanced bit of kit, the EAGLE allows you to program all of these modes using the trigger and fire selector only, with no need for apps, programming cards or other hidden costs!

The EAGLE™ joins the reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings, SHS piston and tappet plate, and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, resulting in a superb firing experience with far more pre-upgraded parts than a platform in this price range deserves! If you like to move fast in CQB with a full metal primary, the Delta Armory DA-A18-EGL ALPHA™ TALOS 3 PDW M4/AR-15 AEG is the ideal primary!

If you are getting tired of CQB skirmishes with an AEG or GBB pistol, a tri-shot shotgun will spice things up! The CYMA CM.373M M1014 M4 Super 90 Shotgun boasts full metal construction and an M1014/M3 Super 90 hybrid design, giving us the looks of the M1014 to complete our British Army or USMC kit with a proven pump-action tri-shot shotgun internal design from Tokyo Marui.

The CM.373M is compatible with standard TM style Airsoft shotgun shells and shoots 3 BBs with each trigger pull, giving you a bit of realistic spread down range, improving hit probability considerably, especially when facing down with fast-moving targets. Make no mistake, using a spring pump action in CQB is similarly challenging to using a sniper rifle outdoors, but if you have what it takes, the CM.373M is one of the best options out there!

If you're looking for a DMR style build ready for locking to semi with a quick change spring system, this bundle is for you! We paired Delta Armory's 14" R15 FREYA™ Gen.2 with their superb 1.5-5X40BE LPVO scope with mount and the Swiss Arms QD Suppressor! A couple of extra mags, a bag of BBs and a speed loader are also included in this bundle to get you going.

This thing looks the business, a proper modern DMR/SPR build, but also gives the option to lock the R15 FREYA™ to semi-auto only, switch out the spring and make it a proper DMR! If you had a DMR build planned, why not save a few quid with the DMR Dominator Bundle?

If you have been looking for the best GLOCK 17 replica around, you will want to consider this! The GLOCK 17 Ultimate Edition from Umarex is the most realistic Glock Airsoft replica on the market by a significant margin. This Glock sports a CNC machined steel slide which is absolutely 1:1 with the real GLOCK 17, unlike others which are GLOCK 21 sized. The outer barrel is also steel, and the magazine is polymer! The result is a GLOCK replica unlike any other, with a completely different feel which perfectly matches the balance and handling of the real thing. This is the Ultimate Glock for collectors!

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

A Gas Blowback Airsoft Pistol designed by WE Europe based off the Traditional 1911 Pistol Design. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine and with Polymer Grips.

If you're looking for a full metal AEG with great DMR potential, the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG is one to watch. As with the other Delta Armory ALPHA™ line AEGs from Delta, the DA-A15-EGL boasts full metal construction with the unique Delta Armory receiver and flawless machining throughout.

Unlike the standard DA-A15, this version is rocking the EAGLE™ programmable MOSFET, offering a wide range of programmable fire modes including semi-auto only and sniper delay. Being a relatively long platform, the inclusion of the EAGLE™ makes the DA-A15-EGL a relatively easy DMR conversion, thanks in part to its quick change spring system. The EAGLE™ MOSFET's other tricks include burst modes of various durations, binary trigger, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you loads of advanced features for a remarkably affordable price.

If you like to skirmish in the great outdoors with a primary at the cutting edge of external design, bristling with accessory attachment points with full compatibility with aftermarket upgrades and an impressively advanced starting point, you'll love the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG!

If you like your sidearms to stand out, the VORSK EU18 Solid Slide GBB Pistol; Metallic Edition sure does! This is the proven VORSK EU18 Solid slide we have all seen before but treated to a gorgeous metallic finish on its slide and trim parts, setting it apart from the usual boring black EU series pistols and allowing those without UKARA to get it right away!

Like the other VORSK EU series offerings, the EU18 Solid Slide Metallic Edition boasts full metal construction, a 6.03mm tightbore inner barrel and a full compliment of upgraded externals, including a pre-installed thread adapter, flared magazine well and an enhanced frame with comfortable faux-stippling texture. Available in a range of metallic colour options including red, purple and V-blue; if a sidearm with a side of style is on the menu, the VORSK EU18 Solid Slide Metallic Edition should suit your tastes!

An Electric Powered SMG-5 replica with a High Cycle Gearbox, which can output 6mm BBs at a muzzle velocity of 325FPS, at a Rate of Fire of over 1000RPM. Built to a very solid standard, this Full Metal replica weighs a surprising amount which makes it feel very realistic in the hands. If you love the SMG-5 shape, but have been put off by the poor performance of previous models, then the CYMA CM.041J High Speed will definitely appeal to you.

If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form.

Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight.

If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!

If you fancy trying the sniper playstyle and you are into your military platforms, the CYMA CM.702 M24 should suit you perfectly. This spring bolt action sniper rifle is based on the real steel M24 SWS, the primary sniper rifle of the US Army and many Law Enforcement agencies in the US. The M24 marries the classic bolt action sniper rifle styling with enhancements which set it apart from VSR-10-based rifles, including its M700 style "long action" and its adjustable stock.

The CYMA CM.702 is based on the Classic Army CA/M24 internally and boasts a 6.03mm tightbore inner barrel straight out of the box, hitting out at an impressive 500FPS +/- 10% using 0.2g BBs. Packaged with a 14mm CCW male thread adapter and with a bipod lug and scope rail built-in, the CM.702 is ready to be kitted out with whatever you need to complete your mission!

This compact and awesome Gas Airsoft Shotgun is constructed almost entirely from Alloy, with the exception of a Polymer Pistol Grip and Stock. It takes standard Airsoft Shotgun Shells and is powered by an Internal Gas Tank just like the TM870 models. If you're looking for a highly realistic and grin-inducing Airsoft Shotgun experience, then this should be very high on your list.

Double Bell brings us a replica of the pistol from the incredibly popular Sword Art Online Alternative Gun Gale, a custom 1911 with souped-up futuristic furniture. The pistol features compensator extensions, which mount to the lower frame, in addition to a flared magazine base plate for that blocky, experimental, anime-style look.

The body and slide of the pistol are constructed from aluminium alloy and sports the classic 1911 design, including serrated grooves on the slide for ease of racking, but with several unique tweaks. With a skeletonised hammer and flat, speed trigger, this pistol is a sure fire hit for those of you looking for that cyber sci-fi and futuristic aesthetic.

Double Bell brings us a replica of the pistol from the incredibly popular Sword Art Online Alternative Gun Gale, a custom 1911 with souped-up futuristic furniture. The pistol features compensator extensions, which mount to the lower frame, in addition to a flared magazine base plate for that blocky, experimental, anime-style look.

The body and slide of the pistol are constructed from aluminium alloy and sports the classic 1911 design, including serrated grooves on the slide for ease of racking, but with several unique tweaks. With a skeletonised hammer and flat, speed trigger, this pistol is a sure fire hit for those of you looking for that cyber sci-fi and futuristic aesthetic.

If you're looking for a unique compact sidearm, the WE Makarov PMM GBB Pistol w/ Silencer should suit you well! This full metal Makarov PMM replica is supplied with a compact suppressor and threaded inner barrel extension, giving you the sneaky look and the option to boost FPS by adding the inner barrel extension. 

The real steel Makarov PMM was conceived in the 1990s as a modernisation of the Soviet-era Makarov PM, the Eastern equivalent to the Walther PPK. The PMM variant added a higher capacity magazine and new ergonomic grip panels but maintained all of the unique Makarov features, including its double action/single action trigger and sleek, snag reducing slide. 

A small sidearm with a big bang thanks to its ferocious gas blowback recoil and full metal build, the Makarov PMM definitely stands out amongst the hoards of Hi-Capa and Glock-wielding skirmishers. Whether you need a sidearm for your Russian mobster look or you want a change from the usual Western designs, the WE Makarov PMM GBB Pistol w/ Silencer should be your sidearm of choice!

The 9mm market is riddled with different variants & styles of guns, from GLOCK's to Vector's, it's about time .45 ACP got some love don't you think? Introducing the UMAREX Heckler & Koch USP .45, a fully licensed Gas Blowback USP .45 replica, one of H&K's finest creations.

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. 

On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

If you're into the British Army look, this should be your primary! The Ares SA80/L85A3 AEG; Deluxe Standard Issue Set includes everything you'll need to recreate the iconic L85A3 rifle as it is issued to the British Army, including a fantastic replica of the ELCAN Specter LDS 4x optic with the Shield RMS piggyback red dot sight and a Grip Pod replica in desert tan.

Just like the standard version, this beast boasts full metal construction and incredible attention to detail, making it as suitable for skirmishing as it is for display in a museum! The lower and upper receivers are both made from stamped steel, with the modernised A3 handguard and 20mm Picatinny top rail being CNC machined from aluminium for a flawless form and perfectly in-spec attachment interfaces.

Inside, the L85A3 is based around a unique gearbox shell with the Ares EFCS MOSFET, providing programmable fire controls through the Ares EFCS Programming Box (available separately) and preventing trigger lock-ups for a ferocious semi-auto response rate. A high torque motor drives the 18:1 steel gearset, allowing for stronger springs to be installed and further improving trigger response. To add a side of realism to the firing experience, the L85A3 also boasts an electric blowback system, cycling the mock bolt carrier back and forth with each shot and drowning out the gearbox report with a violent "clack-clack-clack".

If you're working on a modern British Army loadout and need a primary to finish it off, you can't ask for much better than the Ares SA80/L85A3 AEG; Deluxe Standard Issue Set. With the correct optic and vertical grip, 2 magazines and a superb quality hard case to store it all in, this is the L85A3 replica package for the skirmisher who wants the most realistic look without any problems sourcing the correct bits!

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series.

If you have a Hi-Capa-shaped hole in your heart and are seeking a realistic experience, the EMG R611-3 STACCATO 2011 Hi-Capa P GBB is what you need. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 P, complete with licensed trademarks across the design in engraved, laser engraved and embossed form, very fancy.

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO P is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with premium styling and stand out from the crowd, the R611-3 STACCATO 2011 Hi-Capa P GBB from EMG belongs in your loadout!

The CYMA CM.041H is a new model in the Platinum series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC steel gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

An iconic platform! The Novritsch SSR77 A1 AUG AEG is based on the Austrian standard-issue rifle, used by Christoph from Novritsch himself. It features a full metal construction, although, on an AUG that doesn't mean a lot of metal. The proportions of polymer to metal used for the SSR77 correspond perfectly with the iconic, real steel StG 77 AUG. Novritsch has once again proven that they are really thinking of the players, with its programmable electronic trigger unit, CNC Hop-Up chamber and an infinity flat-hop AEG bucking, the Novritsch SSR77 A1 AUG AEG is a treat for any Airsoft skirmisher!

The programmable electronic trigger unit features modes such as semi-auto, burst, binary, full auto deactivation and adjustable pre-cocking. The ability to alter fire modes makes the SSR77 A1 a very versatile platform and when combined with the lighter-weight high-density polymer, it makes for a premium rifle that is ready for both outdoor and CQB skirmishes. If you are looking for a rifle to complete your military look, or you simply want to get your hands on a great performing AUG, the Novritsch SSR77 A1 AUG AEG is one of the best Airsoft AUGs available on the market!