Airsoft Hop Up Units & Buckings

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

A soft Hop Rubber for Marui compatible AEGs offering an air-tight design, which comes supplied with a nub and is a purple colour.

Whether you're building a DMR or simply want more range from your standard AEG, an R-HOP kit can make all the difference. Unlike other R-HOP kits on the market, the Trusight Tru-Hop Gen.3 is designed to be effectively a drop-in installation, with no need for adding patches of various sizes and includes both the HOP-up bucking and a concave HOP-up nub.

The set is designed to be widely compatible and should fit most Airsoft AEG spec inner barrels, though due to its enlarged contact patch, it will only work with inner barrels with a window measuring approximately 5mm in length x 1.7mm in depth. If you are happy to get stuck in with your AEG internals and you're looking for range and accuracy improvements, the Trusight Tru-Hop Gen.3 Hop-Up Rubber is what you need!

The Maple Leaf Delayer OMEGA Nub is a HOP UP Rubber Nub For Airsoft Hop Up Units, it matches the shape of the BB to increase accuracy and overall performance of your airsoft gun. The nub gives more contact area to the BB and provides a precise amount of pressure around the BB instead of just on the top.

An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you're building a DMR or accurised AEG, the Delta Armory BERSERKER R-Hop Bucking Bundle for AEG is what you need to achieve maximum range. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the BERSERKER bucking is shaped to fill the HOP-up window on your barrel, just like home-brewed R-HOP setups of old. The advantage of using a BERSERKER set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you use heavy BBs and need a range increase, this set will do exactly that!

If you are looking for better accuracy and range, a flat HOP-up nub should do it! The Hades Airsoft Flat HOP-up nub is designed to apply a stronger HOP-up effect than standard cylindrical nubs and is available in 4mm or 5mm lengths.

The nub is constructed from 3D-printed synthetic rubber and maintains its shape regardless of any pressure applied, guaranteeing even pressure is applied across the nub and transferred to your BB without distortion. An additional advantage of using a harder synthetic rubber than the average is that performance will remain constant, even in lower temperatures.

As with other flat HOP-up modifications, this part is only recommended for those who are experienced working on HOP-ups and we suggest that you measure the window size of your inner barrel to ensure you get the correct size for your build.

The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.

If you seek more accuracy and range from your AEG, a HOP-up upgrade is the first place to start! The PTS Syndicate MEC HOP-Up Bucking for AEGs; Twin Pack includes a black HOP-up rubber and a purple one, equipped with a bridge-style contact patch to minimise side-to-side deviation and maximise accuracy. 

The black HOP-up rubber is designed for 295-360 FPS builds, being made from 60-degree hardness rubber and the purple 70-degree rubber is intended for high FPS DMR builds hitting out at 360-460 FPS on a 0.2g BB. If you're the techy type with a build on the go at all times, the PTS MEC HOP-Up Bucking for AEGs; Twin Pack is a great set to have in the toolbox!

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.

If you want your sidearm to be capable of really reaching out, a HOP-up upgrade should be top of your list! The Maple Leaf HOP-up Chamber for VFC/WE/TM EU-Series GBB is constructed from alloy and supplied with a steel HOP-up arm and aluminium "I-key" style tensioner, promising tighter tolerances than the stock HOP-up unit which should translate to better air seal qualities, consistency and thus better accuracy downrange.

This set is compatible with VFC, WE and Tokyo Marui EU-series GBB pistols but should also fit most Tokyo Marui clone EU-series pistols, though as always, we recommend upgrade parts only for the knowledgeable and confident!

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.

If you seek more accuracy and range from your AEG, the Prometheus Bridge HOP-up Tensioner for AEGs will help you achieve it! Supplied as a pack of two tensioners, these are the "Bridge" style design with a central groove designed to reduce side-to-side deviation, focussing on maximum accuracy and providing the smallest grouping possible. The contact surface provided by this HOP-up nub (another word for tensioner) is far larger than the standard, resulting in a stronger backspin effect and extended range with heavy-weight BBs. 

The two tensioners included in the set are of different colours; one purple and one black. The purple tensioner is made from softer rubber, designed for sub-350 FPS builds and the black one is slightly harder, ideal for 350 FPS and above, making it the perfect tensioner for an AEG DMR. Compatibility-wise, these tensioners should fit almost any Airsoft AEG HOP-up unit but as always is the case with internal upgrades, we only recommend these for experienced techs and those who know their way around AEG internals. If accuracy and range is your objective, the Prometheus Bridge HOP-up Tensioner for AEGs belongs in your build!

Are you having HOP-up troubles with your M4 platforms? Delta Armory has you covered! This HOP-up chamber is a replacement part and comes with all the necessary pieces for installation, except for the HOP-up rubber and nub. The main chamber is made from a sturdy plastic polymer and is compatible with all M4 style AEGs which have V2 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers. 

The Delta Armory HOP-up chamber is an affordable replacement for M4/AR-15 AEGs, fix up those old primaries and get them shooting again with this low-price solution.

*Please note that the colour of this chamber may vary; occasionally coming black, as opposed to the imaged blue.

If you want to push your VSR-10-based sniper rifle to the absolute pinnacle of accuracy, a TDC mod should do the trick! The Hades Airsoft TDC HOP-up Unit Set for VSR-10 Sniper Rifle is designed to replace the original HOP-up arm and adjuster, providing direct pressure to the top of the HOP-up nub and bucking to eliminate side-to-side shot deviation.

Installing this TDC unit will require some extensive, irreversible modifications to your base sniper rifle, so we only recommend this set for those who are confident with power tools and have a decent level of Airsoft technical knowledge.

The unit requires you to drill a hole through the top of your outer barrel using either a 5mm or 5.5mm drill bit and the included drill guide, inserting the guide into the stripped outer barrel to ensure the hole is drilled in the right place. Hades also recommends that when the modification is complete, that you glue the TDC unit to your outer barrel using super glue or another strong adhesive.

If you are the type of sniper that likes to get their hands dirty with modifications and you want your VSR to outrange and outshoot the rest, this kit will do it!

If you want to upgrade your Umarex Glock and build a sleeper of a long ranged pistol setup, this is the HOP-up unit you need! The Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is compatible with the Umarex/VFC Glock 17 Gen.5, Glock 19 Gen.4, Glock 19X and Glock 45 GBB pistols and is constructed from alloy for improved strength. The unit is supplied with two HOP-up arms with one pre-installed, giving you a spare to keep handy or modify for some experimental HOP-up setups. 

The tolerances of this unit are far more precise than the original, offering better air seal and gas efficiency, translating into better effect on target and better consistency. If you want to shock the enemy by landing a hit with your pistol at long range, the Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is the key!

If you have damaged your HOP-up unit and are looking for a replacement, CYMA are now offering their original HOP-up units as an aftermarket part. This unit is for the CM.041K and CM.041PDW AEGs, but will not fit the full sized CM.041 AEGs. The unit is constructed from polymer and comes complete other than the HOP-up rubber. The HOP unit, slider, c-clip and HOP nub are all included, so if you have lost or damaged one of these bits you are in luck!

The Maple Leaf MR HOP-up Bucking is widely regarded as the best HOP-up bucking offered by Maple Leaf, offering a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect and an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design intended to prioritise range over grouping size and the ideal pairing for the Maple Leaf I-Key. This bucking is compatible with Tokyo Marui-based GBB and VSR platforms, WE and VFC GBBRs and as always, we only recommend upgrade parts for those who are confident working on their platform's internals. If you want to extend your range out to the borderline implausible, the Maple Leaf MR.HOP HOP-up Bucking will do the trick!

Master Mods are a new Internal Parts manufacturer bringing a whole new meaning to the term reliable. The Master Mods R-Hop Contact rubber is a hardened contact for use with heavier weight BB's, increasing accuracy & performance.

This TDC hop up chamber from TTI is made from CNC aluminium, it is made for Hi-Capa GBB handgun replicas from Tokyo Marui / WE. This hop-up chamber has a TDC adjustment system operated via a notched wheel at the bottom of the chamber.

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!