- Strong gas blowback recoil
- Full metal construction
- Front rail for attachments
Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.
A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.
- High density polymer construction
- 6.03mm Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!
The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.
With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!
- High density polymer construction
- 6.03mm Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!
The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.
With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!
- High density polymer construction
- 6.03mm Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!
The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.
With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!
- Easy To Work Bolt
- Lightweight & Tough
- Scope & Bipod Included
A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.
- Easy To Work Bolt
- Lightweight & Tough
- Scope & Bipod Included
A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.
- Easy To Work Bolt
- Lightweight & Tough
- Scope & Bipod Included
A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.
- Easy To Work Bolt
- Lightweight & Tough
- Scope & Bipod Included
A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.
If you're looking to get into the sport of Airsoft and want something ready for the battlefield, this is the perfect beginner rifle for you. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easily!
The alloy version 2 gearbox the CM.507 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!
This cheap AEG is a great choice for any player looking to start their Airsoft journey with a budget-friendly option that will have no trouble competing either in CQB or the wide spaces of outdoor sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to make the gun unique and truly yours. Whether this is your first step into the world of Airsoft or if you're a pro looking for a cheap project gun to customise, we are sure you will be impressed with the CM.507!
- 2 Magazines included
- VORSK's first GBB SMG platform
- Quick Detachable suppressor included
The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself.
If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!
- 2 Magazines included
- VORSK's first GBB SMG platform
- Quick Detachable suppressor included
The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself.
If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!
- 2 Magazines included
- VORSK's first GBB SMG platform
- Quick Detachable suppressor included
The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself.
If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!
- Alloy slide, polymer frame
- Licenced by Taran Tactical Innovations
- MOSFET Pre-installed - Snappy!
If you love the John Wick look but want to skirmish in the cold, this is the JW3 pistol you need! The EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP boasts official licencing from Taran Tactical Innovation which, of course, means gorgeous authentic TTI trademarks across the design. Being an AEP, this JW3 does not have a moving slide and is powered by an internal battery, meaning solid cold-weather performance keeping it on the field long after GBBs have gone into hibernation!
As much a looker as the GBB version, the JW3 AEP is internally based around the Tokyo Marui AEP gearbox design, enhanced with steel gears running on steel ball-bearing bushings. This improves trigger response and rate of fire while giving the JW3 a much smoother firing noise than other AEPs, not to mention a longer lifespan due to reduced stress on the gearbox shell.
Also inside is CYMA's AEP MOSFET, allowing 7.4V LiPo batteries to be used for a genuinely competitive semi-auto response rate and respectable full-auto fire rate, ideal for snipers looking for a compact and reliable backup platform or pistol aficionados wanting to skirmish to full effect without worrying about GBB cool-down in winter. If you're still wearing your tux when the frost sets in, the EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP belongs in your holster!
- 6.03mm Tightbore inner barrel
- Available in RIF or Pre Two-Tone
- High torque motor pre-installed
If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.
Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!
The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!
- 6.03mm Tightbore inner barrel
- Available in RIF or Pre Two-Tone
- High torque motor pre-installed
If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.
Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!
The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!
- Lever Action M4/AR-15 Platform
- Compatible with G&G M4/AR-15 upper receivers
- Gas powered - KWA type fill valve
If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.
The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. We can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky.
- 6.03mm Tightbore inner barrel
- Pre-upgraded version 2 gearbox
- High density polymer construction
If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".
The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.
Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!
- Full metal construction
- Licenced FN Herstal trademarks
- ARES EFCS Gearbox with MOSFET pre-installed
If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.
Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.
The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Pre-installed slide mounted red dot sight
If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.
This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.
The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!
- 6.03mm Tightbore inner barrel
- High density polymer construction
- EAGLE™ Programmable MOSFET pre-installed
If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.
For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.
If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!
- Full metal construction
- EAGLE™ MOSFET/ETU Pre-installed
- FREYA™ Gen.2 - 16:1 Gearset, High torque motor
If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!
Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.
The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!
- Full metal construction
- EAGLE™ MOSFET/ETU Pre-installed
- FREYA™ Gen.2 - 16:1 Gearset, High torque motor
If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!
Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.
The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!
- Full metal construction
- EAGLE™ MOSFET/ETU Pre-installed
- FREYA™ Gen.2 - 16:1 Gearset, High torque motor
If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!
Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.
The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!
- Full metal construction
- EAGLE™ MOSFET/ETU Pre-installed
- FREYA™ Gen.2 - 16:1 Gearset, High torque motor
If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.
Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.
If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!
- Full metal construction
- EAGLE™ MOSFET/ETU Pre-installed
- FREYA™ Gen.2 - 16:1 Gearset, High torque motor
If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.
Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.
If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!
- Full metal construction
- EAGLE™ MOSFET/ETU Pre-installed
- FREYA™ Gen.2 - 16:1 Gearset, High torque motor
If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.
Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.
If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!
- Full metal construction
- 6.01mm Tightbore inner barrel
- Luxurious ergonomic stock/chassis
Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.
All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!
- Full metal construction
- 6.01mm Tightbore inner barrel
- Luxurious ergonomic stock/chassis
Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.
All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!
- 6.03mm Tightbore inner barrel
- Available in RIF or Pre Two-Tone
- High torque motor pre-installed
If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!
Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!
The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!
- Full metal construction
- Licenced FN Herstal trademarks
- Ambidextrous fire controls
If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.
Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!
About 20mm Picatinny RIS/RAS Rail Equipped Airsoft Guns
Many Airsoft guns use 20mm Picatinny rails as their primary attachment interface, offering a wide variety of accessory options which can be mounted to suit the users' preferences. 20mm Picatinny rails can be used to mount vertical or angled foregrips, tactical flashlights, lasers, red dot sights and scopes, and even 40mm grenade launchers, offering easy customisation and the ability to change configurations quickly and with minimal tools.
If you need access to the widest pool of Airsoft accessories, a 20mm Picatinny rail-equipped gun would be the right call. Some 20mm equipped rifles have individual rails on the handguards, and others have four-point RIS/RAS style quad rail handguards with rails at the 3, 6, 9 and 12 o'clock positions. The advantage of a quad rail handguard is the ample rail space you have to mount accessories, though a quad rail may make the front end of the rifle heavier as a result, especially if you deck it out!
From US Army style M4A1s with RAS quad-railed handguards to AR36s with individual rails mounted to the handguard, you have all the options when it comes to 20mm rail equipped guns here at Patrol Base. Whether you are a milsim skirmisher looking for a MK18 or HK416, or you are an AK fan looking for a PMC-style AK with 20mm rails, you will find them here!