Guns Featuring RIS/RAS Rail

If you ever thought the EU series was falling behind the Hi-capa platform as far as options are concerned, think again! Introducing the EMG SAI BLU, an enhanced EU17 pistol with all the bells and whistles! The SAI BLU sports a tactical slide with front and rear serrations, raised suppressor height sights, a threaded barrel with 14mm CCW adapter, and the ability to mount a red dot sight with any of the included 4 mounting plates!

Don't want to fall in line with all the other M4 users? Well then, get a rifle with a Crusader helmet on the mag well, it doesn't get any more unique or cool than this! This rifle will certainly have you feeling powerful, boasting a skeletonised handguard and a very unique Spike's Tactical Rare Breed Crusader magazine well, extremely unconventional and not seen before in Airsoft.

The CM.107 is what happens when EMG, CYMA, and Spike's Tactical join forces to make a fully licensed, full-metal Airsoft replica. It features a striking, skeletonised handguard and is complete with RIS and M-LOK rails, as well as adjustable mechanical aperture iron sights.

Stand out from the crowd with your own officially licensed, custom M4 SBR, which is perfectly weighted and perfectly balanced for a sweet look and an even sweeter skirmish experience. Plus the CM.107 comes equipped with CYMAs Platinum series internals, including a silent piston head, high-speed motor and high-speed gearset.

A Gas Airsoft 6mm Shotgun, which has a fire mode selection switch allowing you to use either a 3 round shot, or a 6 round shot and is part of the Tokyo Marui M870 Gas Shotgun Range.

A Gas Airsoft 6mm Shotgun, which has a fire mode selection switch allowing you to use either a 3 round shot, or a 6 round shot and is part of the Tokyo Marui M870 Gas Shotgun Range.

Looking for a MK18 Airsoft AEG? Who isn't these days? As the rifle of choice for US Special Forces the MK18 has been immensely popular amongst both Milsim skirmishers due to its authenticity and more casual skirmishers who appreciate the MK18s practical feature set and aggressive looks. 

The CYMA CM.105 is a fully licenced replica from the CYMA Platinum series, sporting pre-upgraded internals with a high speed motor, tight bore inner barrel and ETU/MOSFET to regulate cycling and offer battery protection. The CM.105 differs from other Platinum AEGs with its official licencing from Daniel Defense through EMG in the US. This allows CYMA to add beautifully engraved authentic trademarks and a licenced DD MK18 rail system to their already impressive Platinum setup for what might be the ultimate AEG MK18!

If you're in search of an M4/AR-15 AEG and seek a more realistic feel and weight, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is what you need. This full metal M4 platform is a unique Ares design inspired by the most modern AR platforms in the real steel world, boasting a uniquely design receiver with waffle gripping texture, an M-LOK handguard and compact PDW sliding stock. One of the coolest aspects of the externals is the Ares slim pistol grip, designed to mimic the dimensions of real AR grips for a GBBR-like realistic feel!

Inside, we are equipped with a version 2 gearbox with 18:1 steel gears, a quick change spring system and the Ares EFCS MOSFET, providing programmable fire controls using an Ares EFCS programming box (not included) and low voltage cutoff to protect your battery. The EFCS also improves electrical efficiency and pairs perfectly with the pre-installed slim high torque motor to provide a snappy trigger response in semi, ideal for pumping out suppressive fire in CQB. If you want a solidly built, realistic AR that isn't a GBBR, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is a fantastic choice!

Looking for a mid-ranged, SF-approved AEG rifle? The CM.105 is a full metal AEG with official licensing from Daniel Defense through Evike Manufacturing Group (EMG). This means it comes with perfectly engraved and absolutely authentic Daniel Defense trademarks on the magazine well, a licensed MK18 MOD1 style quad 20mm Rail System, and even more DD markings laser engraved into the side of the upper receiver. The CM.105 isn't just a looker, it also sports the same spritely rate of fire and trigger response as other AEGs in the CYMA Platinum lineup thanks to its high speed motor, and pre-installed ETU/MOSFET. This AEG looks the part, and shoots fantastically, so what are you waiting for?

If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

If you're in search of an LMG for milsim skirmishes or you're a real stickler for the details, you need the Cybergun T8 SP Systems FN Herstal MK46 MOD 0 LMG AEG! Patterned after the real steel MK46 MOD 0, the special forces optimised variant of the legendary M249/Minimi, this is a proper MK46 replica; constructed with a steel receiver, stamped FN Herstal markings licenced by Cybergun and no M4 mag feeding capability, just like the real thing. 

M4 mag compatibility was removed from the real steel MK46 to reduce weight and is correctly replicated in the Cybergun MK46, though even with the weight reduction, it is a hefty beast! This is due to its plethora of steel externals, including the lower receiver, flash hider, stock base, dust cover, rear sight and trim. The other externals are made from strong alloy, with a superb quality high density polymer stock and pistol grip and a CNC aluminium 20mm Picatinny railed handguard. Make no mistake, this is probably the best built MK46 replica out there currently!

Inside, we have a CA M4249 style gearbox, a significantly reinforced design well suited to sustained fire. The internals include 18:1 ratio CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack and a high torque motor. The gearbox shell is cut to allow for a quick change spring system, making power tuning a piece of cake compared to conventional gearboxes. 

To provide improved long range accuracy and a boost in air-efficiency, a 6.03mm tightbore inner barrel is also fitted along with an alloy rotary HOP-up and a T8 purple HOP-up bucking; a decent step up from the usual stock components. If you're after a modern LMG which is built to bomb proof standards and shoots well as a bonus, the Cybergun T8 SP Systems FN Herstal MK46 MOD 0 LMG AEG is ideal!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds.

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB.

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds.

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB.

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

A 1911 Co2 None Blowback replica by Cybergun, excellent for target practice at home or on a range. No reciprocating slide means more gas efficiency down range. However this does boost the FPS above most site limits, making it unsuitable for skirmish use.

If you're looking for a cheap and cheerful sidearm with more than its fair share of features, the Double Bell 304 Burgundy Viper Hi-Capa GBB Pistol should be right up your street! This full-metal Hi-Capa platform is based on a high-end real steel pistol we all recognise, rocking an optics-ready slide, front and rear slide serrations and a pre-installed compensator to complete the elite look.

Despite its very affordable price point, the Burgundy Viper is supplied in a wave foam equipped hard pistol case with a spare nozzle and a 20mm Weaver optics mounting plate included, giving you some elite features for one of the most affordable full metal Hi-Capa platforms on the market currently. If you're searching for high-end looks for an entry-level price, the Double Bell 304 Burgundy Viper Hi-Capa GBB Pistol is exactly that!

For those Hi-Capa fans who feel the need for speed, the Hi-Capa 5.1 High Speed Custom from Golden Eagle takes out of the box Hi-Capa performance to even greater peaks. The slide of this Hi-Capa has been reduced to practically nothing at all, giving it an incredibly fast cyclic rate with reduced recoil, resulting in a vast improvement in gas efficiency and shot to shot consistency. If you are the type of player who is all about performance, this Hi-Capa would be perfect for your needs, and would almost certainly excel with an HPA rig connected as it does with a standard green gas magazine. The skeletonised slide design and spiral fluted outer barrel would also appeal to those out there who appreciate the minimalist race-gun aesthetic.

A Gas Blowback Airsoft Pistol designed by WE Europe based off the 1911 Pistol Design, but in a more Compact form. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine and with Polymer Grips.

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

Looking for a decent all-rounder Airsoft AEG with an interesting backstory? The MC51 from Jing Gong may have what it takes! This AEG is based on the real steel MC51, a G3 based rifle designed by FR Ordanance in the UK and intended to replace the MP5 in service with the SAS. The rifle served with the SAS for a brief period before it was replaced with the much more sane HK53, a 5.56mm derivative of the G3. This was due to the uncontrollable recoil of the MC51, and though its mighty 7.62x51mm cartridge provided the power the SAS were seeking, it proved too much to make a practical close-quarters rifle. 

The MC51 may have left service in a hurry, but it still lives on in the form of customised G3 and HK91 rifles in the US, the land of the free and home of those who absolutely love hard recoiling rifles with blinding muzzle flash! 

If you are looking for a modern Hi-capa based build with speedy looks and surprising performance, keep your eye on the Golden Eagle Hi-capa 4.3 Dusty Snake! This full metal GBB pistol sports full Tokyo Marui compatibility, a 6.02mm tightbore inner barrel and an optics-ready slide with the common RMR mounting standard.

Boasting all the frills that make the modern Hi-capa platform such a competitive piece, the Dusty Snake is equipped with a stylish compensated front end, flared magazine well extension and even a hand-stippled grip; giving you exceptional gripping qualities whether you rock gloves to a skirmish or not. As a trusty sidearm or a primary pistol for CQB, you cannot go wrong with this remarkably affordable and beautiful gas blowback pistol!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

A bolt action, spring powered sniper rifle with an aggressive and modern aesthetic. This is perfect for the sniper who wants an up-to-date rifle which is easily transported thanks to the folding stock.

If you're in the market for a lightweight AR build with ultra-modern styling and advanced internals, get eyes on the Delta Armory DA-C11-EGL CHARLIE™ 10" M-LOK SilentOps M4/AR-15 AEG. This CHARLIE™ line AEG is made predominantly from robust high-density polymer with an alloy outer barrel, and if you squint, it looks a lot like the Royal Marines' latest service rifle, known as the "KS-1" or L403A1!

Inside, things get even better! The pre-installed EAGLE™ MOSFET/ETU transforms this already impressive little beast with a range of programmable fire modes, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, adjustable precocking and adjustable trigger sensitivity. Being electronic, the trigger will never suffer a dreaded semi-auto lockup, making the DA-C11-EGL a fantastic CQB tool for fire supremacy. When it comes to outdoors, this slick AR platform ain't no slouch. The pre-installed 6.03mm tightbore inner barrel and rotary HOP-up unit ensure it can reach out and give the enemy team a hard time at long range!

A great value option at barely more money than the original DA-C11, this is the ideal version to go for if you want the versatility of using burst mode one game, semi-only the next without the tech knowledge to install a programmable MOSFET yourself. Whether you're fresh to the hobby and want to start with a very competitive platform or you need a lightweight backup for your full metal platforms to keep the pace up late in the skirmish day, you'll be set to dominate with the Delta Armory DA-C11-EGL CHARLIE™ 10" M-LOK SilentOps M4/AR-15 AEG by your side!

If you dream of a 417-based DMR but are worried the incredible mass of the full metal options may compromise your in game agility, this is your dream come true! The Golden Eagle E6906 M-417 DMR is constructed almost entirely from high density polymer with an alloy outer barrel and buffer tube, making this big boy rifle as light as a feather.

Just like the full metal version, this high density polymer M-417 is equipped with an in-line MOSFET, 6.04mm tightbore inner barrel and quick change spring guide on the inside, giving you a head start when it comes to building your dream DMR with easy power tuning thanks to its quick change spring system.

On the outside, there may be far less metal than the full metal model but you have the same plethora of 20mm Picatinny rails, ergonomic pistol grip, 14mm CCW male threaded barrel and AR buffer tube paired with a 417 style wide profile stock. If you want a decked-out special forces style DMR without the ridiculous heft, this is the way to go!

A highly customised Airsoft 6mm BB Pistol based on the venerable 1911 design, combining rugged reliability with startlingly unique aesthetics. Most obviously is the aggressive Strike Face meat-tenderiser like Compensator, replacing the 1911s mundane muzzle with a far more imposing, brutal affair.

If you are a lover of classic assault rifles, you will have noticed the absence of this Swiss beauty in AEG form, especially in full metal AEG form. An oft-forgotten platform, the S-55x series are a great alternative to the wealth of AR15s and AKs used by the vast majority of skirmishers. Take the JG S-551 to a Airsoft site and you will turn heads, then when you start shooting you will turn tails!

This Gas Blowback Airsoft Pistol is a compact member of the Hi-Capa family, constructed from Full Metal, with an Alloy Slide, Frame and Magazine. This makes it very tough and realistic, whilst still retaining the awesome performance of the Hi-Capa Platform. This variant of the Pistol features several Vents on the Slide, Wave Grooves and Full Auto/Semi functionality, making it the perfect Sniper Backup or something to keep handy... for close encounters.

A Gas Blowback 6mm BB Airsoft Submachine Gun, designed to be as compact and maneuverable as possible whilst still supplying the same power and features of a full-sized rifle.

The M907E is one of the latest guns from Double Eagle (DE) Airsoft featuring their latest Electronic Fire Control System which allows for 1-5 Round Burst, a Bump fire Trigger, and boasts a gearbox and battery protection system. Not only does the replica come with an intelligent control system, it is based off he M4 platform, and comes with a full length top rail and MLOK hand guard to many customisation options.