All Airsoft Assault Rifles

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

While the internals of the DA-C06-EGL are similarly equipped to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

Those seeking a lightweight yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is one to watch!

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news!

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

If you're seeking a light and fast M4 platform to handle engagements at all ranges, the DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG should be right up your street. This M4/AR-15 AEG boasts an elite look on the outside, rocking a pre-installed aluminium micro suppressor, mock KeyMod handguard complete with modular rail sections and the latest and greatest stock/grip combo featured on the Delta Armory R15 FREYA™ series.

While the internals of the DA-C07-EGL are similarly equipped to the original CHARLIE™ series, the addition of the new EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

If you like the idea of a lightweight polymer build with the ability to run burst mode, customise trigger sensitivity and much more, the Delta Armory DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG belongs in your arsenal!

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

If you are in search of a full metal, licenced AEG replica of the latest HK416 variant to hit the market, this is the one! The Umarex H&K HK416 A5 AEG Rifle is built like a tank and looks absolutely incredible thanks to its high-quality finish and borderline insane attention to detail. Boasting officially licenced Heckler & Koch trademarks via Umarex along with precisely machined CNC aluminium parts and a steel outer barrel, it comes as no surprise that this HK416 is the best built on the market right now!

On the inside, the HK416 A5 features the VFC version 2.1 gearbox, meaning an ambidextrous fire selector lever and bolt catch are also present to give the realism fans what they deserve, together with full compatibility with version 2 gearbox internals. The HOP-up unit is a modern rotary design, keeping pace with rival platforms, and the internal MOSFET system keeps electrical efficiency at its peak and prevents the usual issues with electrical arcing occurring over time. If you are looking for an HK416 A5 AEG replica that is nearly impossible to tell apart from the real thing, this is what you need!

If you've been weighing up your options in search of an M4/AR-15 PDW to take on those tight corners in CQB, your decision just got harder! The Double Eagle M923A DEK762 AEG is packing the same awesome FALCON EFCS MOSFET as the previous D.E UTR series releases in a uniquely designed AR PDW body with an M-LOK handguard, sound amplifying muzzle device and compact PDW stock which doesn't compromise when it comes to battery space.

With Double Eagle's usual compliment of pre-upgraded internals including a 6.04mm tightbore inner barrel, 8mm ball-bearing bushings, a quick change spring system, a rotary adjustable HOP-up unit and 11.1V LiPo compatibility, the DEK762 absolutely meets the mark when it comes to performance and is ready for any M-LOK or 20mm accessories you can throw at it. Whether you are seeking a new CQB primary or you need a backup to your sniper rifle with a bit more firepower, the DEK762 would be a serious asset in game!

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament KU905 AUG Full Rail AEG is a unique modern take on the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard.

The KU905 boasts full metal construction, a pre-installed MOSFET and a quad-railed handguard with an integral suppressor, and is a more modern iteration of the AUG with plenty of 20mm rails on the stock/chassis for the addition of accessories. If you need an AUG that can be kitted out like an M4 and has a unique look as a bonus, the KU905 will do everything you need it to!

Don't worry, it won't bite! This AUG certainly defies the conventional style of most common assault rifles, even most AUGs themselves and they're pretty unconventional! It brings aggression and style to the battlefield, with a fierce front end, the muzzle device is sharp and pointy, menacing to look at and overall gives this AUG a hint of danger. This pairs with the handguard, which is styled to look like a set of jaws with sharp fangs, again, adding to the brutal look of this AEG.

As it is an AUG, it boasts some of the usual features that, like Marmite, you either love or hate. It boasts modern ergonomic features, ambidextrous controls and ultra-slick quick disassembly it's almost impossible to believe that the first AUG rifle was designed way back in 1977! It was known originally as the STG 77 when it was introduced to the Austrian service and it has been seen with numerous armed forces and police units around the world.

If you're a discrete skirmisher in search of an AEG which can be an assault rifle one day and a DMR the next, check out the Delta Armory DA-A10-EGL ALPHA™ SilentOps DMR M4/AR-15 AEG! This full metal ALPHA™ line AEG is rocking the latest and greatest MOSFET/ETU from Delta Armory, known as the EAGLE™, and is dressed to impress on the outside with a CNC aluminium KeyMod handguard, integral suppressor and the latest Delta Armory furniture.

The EAGLE™ ETU adds a whole new level of functionality to the Silent Ops DMR setup. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. The result is an incredibly advanced M4 AEG with the option to quickly change the spring, lock to semi and run it as a DMR without needing extensive internal work!

The EAGLE™ joins the reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. If you've always fancied a DMR but want a flexible setup in case you change your mind, the Delta Armory DA-A10-EGL ALPHA™ SilentOps DMR M4/AR-15 AEG is the ideal does-it-all platform for you!

For those in search of a beefy DMR base platform, this is the one. The East Crane EC-204 G-417 Semi-Automatic DMR AEG is ready to be converted straight into a DMR with its quick-change spring system and preinstalled Kestrel Basic Eshooter MOSFET. As it comes this rifle does not have full-auto enabled, this can however be turned back on using the MOSFET. The omission of full auto straight out of the box is the cherry on top and solidifies this platform as the perfect DMR replica.

This unique-looking rifle is based on a German-manufactured service rifle, the extended handguard is great for longer scope setups and any additional attachments you may require to complete your operations. If you require an outstanding DMR-ready platform for your milsim escapades, your prayers have been answered with the East Crane EC-204 G-417 Semi-Automatic DMR AEG, all you need is a massive scope and sneaky suppressor and you will be ready for the battlefield!

Whether you are doing a US Army Sniper impression or you simply appreciate a big boy 7.62x51mm style AEG which is ready for DMR duty right away, the East Crane EC-901 SASS SR-25 DMR should suit you well. This AEG is styled after the real steel M110 Semi-Automatic Sniper System (SASS) which replaced the M24 Sniper Rifle in US Army service and is finished in Flat Dark Earth to match the real thing.

Not content with simply looking like a DMR, the EC-901 is locked to semi-automatic only and is rocking a 6.04mm tightbore inner barrel, rotary HOP-up unit and quick change spring system, making for an easy switch to true DMR capability for anyone who can master the super slick quick change spring. The heart of this beast is a version 2 long gearbox (aka V2.5) and an in-line MOSFET to improve trigger response and electrical efficiency, coupled with steel gears running on 8mm ball bearing bushings. If you have an appetite for DMRs, this is the DMR which made Western militaries fall in line and follow suit with their own semi-automatic sniper rifles!

If you seek realism and want to challenge yourself in game, the EMG Noveske N4 "Ghetto Blaster" 10.5" MWS ZET System GBBR will scratch that itch! This Gas Blowback Rifle boasts full metal construction, licensed Noveske trademarks and some incredible internals modelled from the best when it comes to GBBRs; the Tokyo Marui ZET system.

This rifle is definitely a step up from a battery-powered M4! A GBBR provides unparalleled realism with its realistic operations such as loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While it may seem like a lot to learn and get used to, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licensed by Noveske through EMG and manufactured by Double Eagle, the "Ghetto Blaster" has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks. It also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR up and running.

The Double Eagle M9XX range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an exceptional exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture. The M916G is equipped with an ergonomically designed M-LOK handguard which includes gripping surfaces, and provides a slick, snag-free AR15 design cast in high density polymer. This AEG also sports Double Eagle's highly advanced FALCON FCU, offering binary trigger, burst mode and other advanced features which can be programmed with the rifle's trigger and fire selector.

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

If you're looking for a new CQB primary at the cutting edge of real steel rifle design, the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU should be right up your street! Based on the real steel DDM4 PDW, this compact M4/AR-15 platform boasts full metal construction, official licencing from Daniel Defense via EMG and CYMA's Platinum E-Edition internals, making it a world beater in every way!

Inside, you'll find a reinforced V2 gearbox equipped with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges despite the short overall length of the DDM4 PDW setup!

Improving on the previous DDM4 PDW AEG, this version is equipped with the EShooter Kestrel Basic ETU, offering programmable fire modes including 3-round burst, binary trigger and 6 levels of adjustable pre-cocking. This is a major improvement over the Zeus MOSFET of the original, not only enhancing reliability in the long term but giving you more exciting options and the ability to crank semi-auto response speed up to near GBBR levels!

Both internally and externally, the DDM4 PDW is at the top tier of Airsoft platforms, ideal for CQB players or aggressive playstyles outdoors. If you love licenced trademarks, a high quality metal build and plenty of attachment and customisation options in a compact, menacing form, you'll love the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU!

If you're in search of an affordable, easy to master and fully upgradable primary, the NUPROL Delta Pioneer Recon M4/AR-15 AEG should be in your sights! This M4/AR-15 AEG replica is constructed predominantly from high density polymer and equipped with plenty of attachment interfaces, from its 20mm Picatinny railed receiver to its mock KeyMod handguard with pre-installed rails and 14mm CCW male threaded barrel. Whether you want to rock a red dot sight, rifle scope, tracer unit, suppressor, vertical grip or bipod, the M4/AR-15 Recon is ready!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If you need a cheap and cheerful beginner platform with plenty of upgrade and customisation options or a reliable, lightweight back-up platform to loan to mates or use when your arms get tired, the NUPROL Delta Pioneer Recon M4/AR-15 AEG is a fantastic option!

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

If you want a 7.62x51 style AEG and want something precise and surgical, the East Crane EC-203 M-417 SDMR Semi-Automatic DMR AEG is calling your name! This unique-looking rifle is based on a German-manufactured service rifle, its extremely long handguard is great for longer scope setups and will easily accommodate any additional attachments you may require to complete your operations.

As it comes, the EC-203 is ready to be converted straight into a DMR with its quick-change spring system and preinstalled Kestrel Basic Eshooter MOSFET. Out of the box, this rifle does not have full-auto enabled, this can however be turned back on using the MOSFET. The omission of full auto straight out of the box is the final piece of the jigsaw that solidifies this platform as the perfect DMR replica.

Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

If you're a fan of the real steel firearm scene and love tactical platforms, you must be well aware of the Noveske N4! This Airsoft replica boasts full metal construction and a plethora of pre-upgraded parts from CYMA Platinum, the N4 hits the enemy team where it hurts, with an astonishing trigger response and rate of fire thanks to its E-Edition high-speed internals and MOSFET combination.

To get your rounds out there accurately and consistently, a 6.03mm tightbore inner barrel is installed, coupled with an alloy rotary HOP-up unit for impressive long-range performance, especially for such a compact platform. This 10.5" rifle, is the perfect length for any Airsoft scenario with a performance that can challenge anything else on the skirmish site.

Being an EMG-licenced replica, the N4 Shorty is adorned with flawlessly engraved and laser-engraved Noveske trademarks, making it genuinely hard to tell apart from the real thing. If you want one of the most realistic-looking platforms available on the market, you don't want to miss the EMG Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle; Kestrel Basic ETU!

The DIPLOMAT: a person who can deal with others in a sensitive and tactful way. Well, we can assure you that there is nothing sensitive about this AEG, but it is certainly tactful! Tactful in the sense that it shows skill when dealing with others or difficult issues... on the battlefield. This short and snappy rifle is loud, proud and better than the rest of the crowd.

It features a pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal. A CYMA Platinum E-Edition gearbox, complete with a pre-installed Kestrel ETU, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barrelled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for!

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're into advanced real steel rifles and are a realism fan, you're going to love this one! The EMG Noveske N4 "Ghetto Blaster" 7" MWS ZET System GBBR boasts a fantastic quality full metal build with authentic licenced trademarks across the design thanks to EMG's cooperation with Noveske Rifleworks. All of the details are a perfect match for the real Ghetto Blaster, down to its "Cherry Bomb" muzzle brake, "Super Badass" charging handle, NHR M-LOK handguard and Noveske 4th generation billet receiver.

Internally, the Ghetto Blaster is based on the legendary Tokyo Marui MWS/ZET system, meaning impressive gas efficiency, a wide range of aftermarket upgrade options and compatibility with what is widely regarded as the best M4 GBBR magazine design available today. The recoil is snappy and strong, the bolt catch and charging handle are fully functional and long range performance is very impressive thanks to its VSR/GBB spec HOP-up bucking and excellent efficiency.

A feast for the eyes with an exciting aesthetic and a firing experience which cannot be imitated by any AEG, the Ghetto Blaster GBBR is a cutting-edge piece of kit, ideal for realism focussed skirmishers. Whether you're into the distinctive Noveske aesthetic or you're looking to get to work with one of the most realistic Airsoft platforms available, the EMG Noveske N4 "Ghetto Blaster" 7" MWS ZET System GBBR will put a big smile on your face!

If you're ready to start your Airsoft adventure, the NUPROL Delta Pioneer Jackal M4/AR-15 AEG is a great option. Made primarily from high density polymer with steel and alloy trim parts, this build is ideal for younger skirmishers with less physical strength and those seeking a simple and bombproof backup to lend to mates or use near the end of the skirmish day when post-battle fatigue sets in!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If you're seeking a compact and sleek AR platform in a beginner-friendly format, the NUPROL Delta Pioneer Jackal M4/AR-15 AEG is a great call!

New to Airsoft and seeking a sneaky primary? Check out the NUPROL Delta Pioneer M4/AR-15 SD AEG! This lightweight beginner-focussed M4 AEG is made predominantly from high density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, making it ideal for younger skirmishers and those who don't like to be held back by a hefty full metal build.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If you prefer a covert look for your M4/AR-15, the NUPROL Delta Pioneer M4/AR-15 SD AEG should keep you happy!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK17 SCAR-H replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-H. Externally, this SCAR-H is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-H into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET will do the trick!