All Airsoft Submachine Guns

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If you're an AK fan but are looking for a submachine gun style Airsoft AEG we have a treat for you! The Arcturus PP-19-01 Vityaz AEG sports superb build quality with a large number of steel external parts, a pre-installed MOSFET for improved trigger response, a 6.01mm tight bore inner barrel and a new style of AK HOP-up chamber using a rotary style adjuster for precise tuning and greater projectile stability. For those looking for a CQB AEG with a Russian twist, or those AK fans who love the platform and want an AK of all sizes in their collection, the PP-19-01 Vityaz is calling your name!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

Whether you are a sniper looking for a compact AEG backup or want something short and light to take advantage of your agility, the Cybergun P90 is perfect for the job. This AEG boasts full metal construction, realistic trademarks licenced by FN Herstal itself and ambidextrous controls, perfect for left-handed shooters or those who like to shoot from both shoulders to make the best use of cover.

The internals are based around the TM P90 design, meaning a version 6 gearbox, rotary HOP-up unit and full compatibility with aftermarket upgrades for the TM P90. Also fitted are a 6.03mm tightbore inner barrel for an improvement in accuracy potential and 8mm bushings for a smoother gearbox report and a slight increase in rate of fire. If you like to move fast and crawl in the woods, the P90 is your best friend!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring. 

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

An Airsoft Electric Pistol replica of the MAC-10 Sub Machine Gun, which comes included with a Battery & EU Pin Charger, as well as the proprietary suppressor which this SMG is rarely seen without.

The CYMA CM.041G is a new model in the Platinum Series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC Steel Gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

A compact, lightweight and extremely awesome Gas Blowback Airsoft Submachine Gun, which is the perfect tool for dominating CQB and other tight arenas, as well as a backup to a Primary Gun (such as a Sniper Rifle). If you need a pocket rocket that can splurge a 42rnd Magazine in literal seconds, then the HFC HG-203 Submachine Gun is exactly that.

An Electric Powered SMG-5 replica with a High Cycle Gearbox, which can output 6mm BBs at a muzzle velocity of 325FPS, at a Rate of Fire of over 1000RPM. Built to a very solid standard, this Full Metal replica weighs a surprising amount which makes it feel very realistic in the hands. If you love the SMG-5 shape, but have been put off by the poor performance of previous models, then the CYMA CM.041J High Speed will definitely appeal to you.

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.