Guns Featuring MLOK Rail

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

If you've been keeping up with anything Airsoft, you must be excited about this one! The Vorsk VMP-2D is here and this gas blowback DMR rifle is a game changer. Out of Vorsk's new line, this variant is the big boy, the full-fat DMR version. Equipped with a longer M-LOK handguard, extended outer barrel, and marksman stock with an adjustable cheek riser, this is the VMP-2 for long-range specialists. With a locked semi-auto function, this rifle delivers precise shots at up to 450 FPS with 0.2g BBs, making it a powerful choice for any marksman.

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side. It is compatible with M4/AR-15 GBBR pistol grips and features mounts for the prolific M4/AR-15 buffer tube at the rear. The D variant features a fixed marksman-style stock with an adjustable cheek riser which is exactly what you need to get a good view of your target down a rifle scope!

The HOP-up unit has a unique design with an external TDC adjuster, perfect for convenient mid-game setting changes to keep up with the versatile conditions, not to mention being an inherently accurate and precise design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options for tuning performance to meet your needs.

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're a CQB skirmisher and are looking for a new compact AR platform with a ton of nifty features all for a relatively low price, then the DA-B18-EGL BRAVO™ has you covered! This PDW-style AEG comes with a CNC aluminium handguard and a high-density polymer receiver. And of course, the star of the show, the EAGLE™ MOSFET! This ETU allows you to program your preferred firing such as burst modes, binary trigger and an AUG mode.

This AR is equipped with an M-LOK handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out on the inside with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET.

The compact nature of this AEG means that the PDW stock and buffer tube can only accommodate smaller batteries. We at Patrol Base recommend the Specna Arms 7.4V 600mAh 20/40C Battery for PDW as it is specifically designed for PDW-style assault rifles. If you want an advanced compact platform that is perfect for running around in a CQB skirmish, then the DA-B18-EGL BRAVO™ TALOS 3 PDW M4/AR-15 AEG is the one to choose!

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're looking for an Airsoft bundle based around one of the best M4 AEGs on the market, you just found one! The KRYTAC REC7 Premium Primary Pack; SBR includes the KRYTAC Barrett REC7 SBR AEG, 2 extra mid-cap magazines, a holographic style red dot sight from Guerilla Tactical with a Ghost 3x Flip to side magnifier. The set also includes the HASTA Large Wheeled Rifle Case, giving you a nice home to store your new premium primary!

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries.

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

If you're in search of an M-LOK-equipped AR AEG packed with pre-upgraded parts, the Delta Armory DA-B13-ETU BRAVO™ M4/AR-15 M-LOK AEG is one to watch. Like Delta's other BRAVO™ like offerings, the DA-B13-ETU boasts a CNC aluminium handguard and high density polymer receiver, giving you a great combination of realism and low weight. The handguard is rocking M-LOK slots at the 3, 6 & 9 o'clock positions and a 20mm Picatinny rail up top, ready for whatever accessories you need to complete your mission.

Delta's ETU AEGs are even more upgraded than the standard BRAVO™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These pre-upgraded internals give the DA-B13-ETU a super snappy trigger response and raised rate of fire from the combination of improved efficiency via the ETU and faster mechanical cycling via the high-speed gearset.

If you need a handy platform with beastly internals at the perfect length for aggressive, fast-moving playstyles, the DA-B13-ETU from Delta Armory will be an asset to your game!

If you’ve seen our videos from IWA and the G&G World Cup you must be lusting after this thing as much as we are! Introducing the G&G Armament ESG-B10 Gas Shotgun, the spiritual successor to the ill-fated FLAK-12 design, a semi-automatic gas-powered shotgun offering the choice between a punishing 5 BBs per trigger pull and a positively evil 10 BBs!

The ESG-B10 is constructed with a CNC Aluminium upper receiver and a superb quality high-density polymer lower, as G&G is known for, and takes standard M4/AR-15 AEG magazines, meaning spares are ever available. Bristling with M-LOK slots on each side and the bottom with a generously long 20mm Picatinny top rail, the ESG-B10 is ready to be kitted out with accessories despite the unique nature of its design.

If you play CQB and need something to take on those drum-mag rocking HPA tri-shot speed-softers, the G&G ESG-B10 will give them a run for their money!

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.