Airsoft Mounts

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

MGP brings us a high quality Quick Detach (QD) sling adaptor, allowing you to connect your weapon of choice to a sling. The QD system is locked in place by 4 steel ball bearings which are lowered with a push of the centre button to lock in place and release, again by pressing down the same button.

This version supports 20mm RIS / RAS rail system. Simply loosely screw the fixtures together using the Allen key included, then slide them onto your RIS rail, then tighten to lock the fixture in place and voila! Now you can attach and detach your sling swivel with ease, allowing for a dynamic and efficient playstyle on the battlefield.

No more unslinging your rifle from your back or shoulders!

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

If you want to add a western red dot sight or scope to your AK platform this adapter will do it! The M-ETAL 20mm Picatinny Railed Scope Mount for AK Side Rail fits AK-style side rails present on most AK-74 and AK-10x style AEG and GBB rifles and provides a 20mm Picatinny rail of approximately 17cm in overall length.

The mount attaches via a QD locking mechanism constructed from steel, meaning you can quickly add and remove your optic to suit the requirements of the mission and even switch between a red dot sight and telescopic sight if you have a mount for each optic. If your AK needs the benefits of western 20mm Picatinny sight options this adapter is a must!

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

A very simple and innovative design. This adaptor secures onto the SMG-7 or SMG-5 sling point of your choice. You can then equip your sling of choice onto the polymer buckle. 

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on GBB Gas Blowback Rifles between the Receiver and the Buffer tube allowing the attachment of Slings. 

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

The perfect mount for your torch, able to fit to any 20mm RIS/RAS rail and with 5 adjustable positions.

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

A set of two High Profile Scope Rings for 30mm Optics, that will easily connect to 20mm RIS/RAS Picatinny Rail Systems. They have a two-piece design which makes installation very easy, and comes included an Alley Key to aid installation. They are High Profile Rings which will hold the Scope higher than standard, making it easier to aim whilst wearing Lower Face Protection.

A set of Alloy constructed Scope Rings for 30mm Optics, that has a 20mm Mount on each ring for easy installation to a 20mm RIS/RAS/Picatinny Rail System. They are Low Profile Rings, which will hold your Optic low against your rail rather than reaching for the sky.

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.