Airsoft MOSFETS

If you're the techy type running a Gate TITAN II and want more realism, this part is the key! The GATE Bolt Catch Button with Cable for TITAN II will bring the usual dummy bolt catch on any TITAN II equipped AEG to life, providing PTW-like functionality and realism!

Naturally, this part will require considerable modification to your receiver, bolt catch and gearbox shell, so make sure you either know what you're doing or consult a professional tech before ordering. This set includes the internal Bolt Catch button and the cable to connect it to your TITAN II, but doesn't include the external bolt catch itself.

If you're planning to take full advantage of your Gate TITAN II ETU's advanced features, check this out! The Gate Divider Cable for TITAN II ETU; 1x Power & 2x I/O allows you to connect two accessories from the Gate ecosystem via a single port, perfect for those who want the bolt catch button, magazine catch sensor and more!

Naturally, this part will require some expertise to install and use correctly, though it is pre-wired, so you won't need the soldering iron. If you're the techy type looking for a seriously advanced AEG, the Gate Divider Cable for TITAN II ETU; 1x Power & 2x I/O is an integral part!

If you plan to upgrade your M4/AR-15, SMG-5 or G3 AEG with a high-end MOSFET filled to the brim with programmable features, the Perun MOSFET V2 Hybrid, Rear Wired is what you want! This optical MOSFET/ETU system replaces your conventional trigger contacts with optical sensors, improving trigger response and reliability while adding an absolute litany of programmable fire mode and MOSFET functions.

Fire mode options include burst modes of varying duration, reconfigurable fire selector positions, semi-automatic only, DMR/sniper delay, binary trigger and two-stage trigger. The V2 Hybrid also offers adjustable trigger sensitivity, adjustable active braking, pre-cocking with spring release and DSG mode, a specific mode for Dual Sector Gear setups. Make no mistake, the V2 Hybrid is every bit as advanced as its rivals with the added benefit that all of the programming can be carried out using the fire controls of your AEG, with no need for PC or app connectivity!

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you are looking for an affordable way to add advanced functionality to your M4/AR-15 AEG, this is worth a look! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox replaces your conventional trigger assembly and offers burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

If you want to turn your M4, SMG-5, G3 or other V2 gearbox-equipped platform into an advanced space gun, the Double Eagle FALCON 2.0 Programmable MOSFET for V2 Gearbox should do the trick! This is the same FALCON EFCS system installed in Double Eagle's superb M90x range, including the UTR45, UTR556 and AX//15 rifles. Once installed, the FALCON offers a wide range of programmable fire mode options along with adjustable trigger sensitivity and the usual improvements in rate of fire and trigger response a MOSFET provides. 

Available fire modes include 1-5 round burst, binary trigger (fire on trigger pull and on release), and 3 levels of trigger sensitivity, from a super short hair trigger to a more realistic full trigger pull. The FALCON will also warn you of any electrical anomalies by vibrating your motor 3 times and cutting off power to protect itself and will also cut power if your battery is running too low, indicating with 5 motor vibrations. The only thing the FALCON doesn't do is shoot the AEG for you!

If you are experiencing issues with semi-automatic as your AEG gets older, the likelihood is your switch assembly/trigger contacts have become corroded and need replacing. Fortunately KRYTAC are here to provide a complete pre-wired switch assembly, complete with their in-line MOSFET which provides protection to the circuitry and prevents the AEG from firing if the battery voltage drops too low. The assembly comprises of the trigger contacts, MOSFET, automotive fuse, male Deans connector, and spade connectors, all wired together and ready to go once installed.

A drop-in trigger, ETU & MOSFET for Version 2 compatible rear-wired Airsoft replicas, which includes features like a programmable trigger, low battery cutoff, shot sensor and comes included with a vertical 'speed trigger'.

If you're running an AEG equipped with a microswitch V2 gearbox and need a faster trigger, the Cybergun JeffTron Switch Brake MOSFET with Wiring is what you need! This Active Braking MOSFET is designed to replace the original microswitch trigger system and comes pre-wired with high-quality AWG16 and AWG24 wiring. As with any internal upgrade, we suggest consulting a tech before attempting installation if this is your first time!

This MOSFET is designed to prevent the piston from stopping in a random position when you take your finger off the trigger when shooting full auto and ensures only a single cycle is completed in semi-auto. Rate of fire and trigger response should also improve thanks to electrical efficiency advantages when compared to standard microswitches. This MOSFET is only designed for microswitch trigger-equipped V2 gearboxes and isn't likely to work with standard V2 or other gearbox types.

If you need a replacement for your G&G MOSFET or want the latest version with its more compact design, the G&G Armament ETU/MOSFET for G2 Gearbox; Rear Wired is ideal. This set is pre-wired for relatively easy installation and is the latest G&G MOSFET 4.0 with its more compact form, saving you space in your battery compartment.

Installing this set gives your AEG the option of programming 3-round burst instead of full auto, great for those who keep running out of ammo due to a heavy trigger finger! Other features include low-voltage cutoff and cycle completion, ensuring both your gearbox and battery are kept healthy in the long term. Worth noting is that this set will require 11.1V LiPos to be used and if you're installing this in a non-G&G G2 AEG you will need to carry out modifications to ensure your setup does not pre-engage (AOE correction at the least).

If you're running a TITAN II ETU equipped AEG and are sick of dry-firing, add the GATE Magazine Sensor & Cable for TITAN II ETU! This sensor plugs into the TITAN II ETU sensor ports and detects when your magazine runs dry and stops it from firing. This part requires extensive modification, so we only recommend it for experts!

The Magazine sensor is programmable through the TITAN II itself and Gate Control Station App, allowing you to set the round count of your magazine so it cuts off when you run out of rounds. The sensor will also prevent firing when a magazine is not inserted, but this function can be turned on and off via the GCS app.

If you've fitted your AEG with a Gate TITAN II MOSFET but you now want to go HPA, the Cables for TITAN II MOSFET Equipped Dual Solenoid HPA Engines will save you from buying a new MOSFET! Designed to allow the AEG version of the TITAN II to be used with dual-solenoid HPA engines such as the Gate PULSAR Dual-Solenoid and the Polarstar F2, this cable is ideal for upgraded AEG users who seek to join the dark side without replacing their TITAN II with the HPA version.

If you're a realism fan running a TITAN II-equipped M4 AEG, this will please you! The GATE Magazine & Bolt-catch Sensor w/ Single Connector for TITAN II ETU combines the Gate bolt catch sensor and magazine sensor into a single unit, meaning you save a power port on the TITAN II for other accessories.

This set will require extensive modification to install, so we only recommend this set for advanced users and experience technicians willing to break out the power tools!