Airsoft Silencers, Suppressors & Tracer Units

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

If you're in the market for a small tracer unit but want one with a muzzle flash, the Eshooter Flare Cube BT Tracer Unit with Muzzle Flash is your best bet. This compact tracer unit has an ultra-low profile design, measuring approximately 6cm long with a 4cm height and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE Cube BT is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE Cube BT is ready to be mounted on 14mm CCW male threaded outer barrels but also includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare Cube BT. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter so you can rock the FLARE Cube BT too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE Cube BT charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE Cube BT is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

This Alloy Suppressor is designed for Airsoft Guns with a 14mm CCW Male Thread, and features Foam Baffles on the inside, supported by a spring core to provide rigidity. The dimpled end cap of the Suppressor can be removed to access the internals. Whether you need to hide an Inner Barrel extension or you just want to add some 'tactical' to your replica, this Suppressor is perfect.

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

Looking for a mini-suppressor you can add and remove when you feel like it? Check out the Dummy Special Force Sound Suppressor from 5KU! Mimicking a real firearm suppressor, this thing functions more like a sound amplifier for Airsoft purposes and gives your primary and intimidating muzzle report.

An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.

This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot.

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot.

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

A foam filled Airsoft mock suppressor, designed to be attached to Airsoft 14mm threaded outer barrels, and is specially with adaptors allowing the suppressor to fit both Clockwise (CW) and Counter Clockwise (CCW) threads. 

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR.

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!

If you want to give your primary a sneaky look, a suppressor is the way to go! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

5KU brings us an imitation of the Russian SF 9x19 flash suppressor made high quality CNC aluminium, known as the KP-9. With a large, rounded and aggressive aesthetic, the very front of the suppressor sports cut grooves and port holes to conceal muzzle flash in the real-world equivalent.

Most often seen on SMGs such as AK47s, KP9s, MP5s and Scorpions, this Airsoft replica suppressor utilises a 14mm CCW female thread so it can be fitted to any thread or adaptor that sports the corresponding male 14mm thread. With a padded foam interior that muffles your shots, this suppressor gives you what you need to sneak around and get those stealth kills in style!

A gorgeous and well constructed Mock Suppressor for Airsoft Guns which have a 14mm CCW Thread. It features trademarks from KRISS USA and comes included with a threaded spacer with O-Ring for the perfect fit.

If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (GeneralPurpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point.

The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!

The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!

If you're looking for a clean yet effective muzzle attachment, with the added bonus of being a tracer unit as well, then you need the FMA Mod.2 Silencer Tracer Unit! This affordable piece of kit is perfect for tracking your BBs more easily in a dark environment and also for better identifying hits on enemy players.

It has 14mm CCW threads, meaning it attaches to most common Airsoft barrel threads. The unit's shell is constructed from CNC aluminium, making it durable and lightweight. To power the tracer, you will need 3 AAA batteries, these are NOT included with the product. It is activated by pushing the on/off toggle switch located on the user side of the tracer.

Give your Airsoft platform a tactical face-lift, as well as the gameplay benefits of a tracer unit with the FMA Mod.2 Silencer Tracer Unit!

If you want to furnish your primary with stealthy styling, the Umarex ELITE FORCE C4 Mock Suppressor; 14mm CCW will do the trick! Constructed from aluminium with a knurled collar for easy attachment and removal, this mock suppressor is hollow on the inside, making it ideal for running an extended inner barrel through to enhance accuracy and squeeze a bit more air efficiency from your primary.

The C4 Suppressor mounts to common 14mm CCW male barrel threads, making it ready to mount on almost any Airsoft rifle or SMG. Being made from aluminium keeps the C4 lightweight, ensuring you don't end up with a sleek-looking primary which handles like a pig. Tipping the scales at only 160 grams, this suppressor should also be suitable for mounting on GBB pistols, minimising the usual sacrifice in gas efficiency, but make sure you have a 14mm CCW male thread on your pistol before purchasing!

If you are looking for a suppressor for your lil' AK, you have found the right one. The real world PBS-4 is designed for use on the AKS-74U rifle, but has also been seen in use on full length AK74s!

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you have had your eye on one of the super cool new spitfire tracers on the market but would prefer it in a more AK-friendly design, we have just what you need! The Vityaz Spitfire Tracer unit from 5KU combines the awesome functionality of a spitfire tracer unit, with its realistic muzzle flash effect and tracing function when used with tracer BBs with the unique looks of a Russian designed suppressor.

For those in the market for a suppressor for their AAP-01 Assassin GBB pistol, or for that matter any pistol requiring a slim style suppressor, consider the DDW Suppressor from Action Army. This suppressor attaches to any 14mm CCW male thread and is a lightweight aluminium design with attractive vents and a foam filling for some suppression effect.

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762 Dummy Suppressor belongs on your gat! Well suited to Sig MCX and Rattler builds but compatible with any Airsoft platform with a 14mm CCW male threaded barrel, the SRD762 makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Externally, the SRD762 takes a walk on the wild side, equipped with a menacing spiked front end designed for breaching doors in real steel form. The exterior profile is ribbed to match the real thing, intended to help dissipate built-up heat but serving in Airsoft terms to keep the SRD762 looking faithful to its real steel counterpart. 

Inside the SRD762 you'll find a spacer designed to accommodate a 34mm diameter tracer module and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762 Dummy Suppressor is as well-made and good-looking as they come! 

You've heard of the legendary Bifrost tracer unit, but this new Acetech X Lancer Tactical special edition takes the most stylish tracer unit on the market and bumps it up a notch with a gorgeous heat gradation/rainbow effect finish which is sure to draw eyes in game and would be the perfect companion to a loud and proud high rate of fire build.

As with the original Bifrost, this compact Acetech tracer unit offers a plethora of functions including muzzle flash simulation, selectable colours for the LED array, Rainbow and Dynamic Rainbow mode as well as the option to run the unit as a simple tracer unit for when you want to be more discrete and sneaky. The unit mounts to 14mm CCW male threaded barrels but also comes with an 11mm CW to 14mm CCW adapter, meaning it can also be mounted on any pistol with 11mm CW female threads. With all the options under the sun and the ability to keep pace with extremely high rates of fire (up to 35 rounds per second!), this is probably the ultimate Airsoft Tracer unit!