New Airsoft Guns & Products

Power up your Airsoft gas pistol or rifle with the Smart Gas Airsoft Green Gas! This gas is infused with silicone lubricant, keeping your gas internals running smoothly even in temperatures as low as 5°C (using full auto will likely still cause your replica to gas out). Smart Gas™ has a composition and pressure that can provide up to 20% more power to your Airsoft platforms, as well as better consistency with rapid shots in semi.

The Smart Gas Airsoft Green Gas comes in three sizes; all have a polymer nozzle, so they won't cause damage to your magazines' o-ring seals. Each bottle comes with a cap to protect the nozzle from any damage. This is a perfect all-rounder gas for most gas Airsoft rifles. Although this gas can be used in platforms with heavy bolts, it is recommended to get something stronger.

If you need a go-to gas that can pretty much do it all, the Smart Gas Airsoft Green Gas is your best choice. With its silicone lubricant, propane mix and power-up capabilities, it keeps your replica running consistently in lower temperatures when compared to other Airsoft green gases.

Please note - The label provides two ml measurements. The canister capacity (the larger one) and actual gas volume (the smaller one) are different to allow the expansion and compression of gas based on the temperature.

Power up your Airsoft gas pistol or rifle with the Smart Gas Airsoft Green Gas! This gas is infused with silicone lubricant, keeping your gas internals running smoothly even in temperatures as low as 5°C (using full auto will likely still cause your replica to gas out). Smart Gas™ has a composition and pressure that can provide up to 20% more power to your Airsoft platforms, as well as better consistency with rapid shots in semi.

The Smart Gas Airsoft Green Gas comes in three sizes; all have a polymer nozzle, so they won't cause damage to your magazines' o-ring seals. Each bottle comes with a cap to protect the nozzle from any damage. This is a perfect all-rounder gas for most gas Airsoft rifles. Although this gas can be used in platforms with heavy bolts, it is recommended to get something stronger.

If you need a go-to gas that can pretty much do it all, the Smart Gas Airsoft Green Gas is your best choice. With its silicone lubricant, propane mix and power-up capabilities, it keeps your replica running consistently in lower temperatures when compared to other Airsoft green gases.

Please note - The label provides two ml measurements. The canister capacity (the larger one) and actual gas volume (the smaller one) are different to allow the expansion and compression of gas based on the temperature.

If you need BBs for a mix of CQB and outdoors, 0.25g BBs are what you need! The Delta Armory 0.25g EAGLE™ BBs; 1KG Bag are supplied in a resealable bulk bag of 4000 BBs approximately, ideal for those who love a mag dump!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BBs which won't break the bank, look no further!

If you're looking for affordable 0.25g BIO BBs, the Delta Armory 0.25g BIO EAGLE™ BBs; 1KG Bag is ideal. Supplied in a resealable bag of 4000, these BIO BBs are made from biodegradable PLA polymer, which allows you to magdump all day long with a clear conscience out in the wonderful woodlands.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

If you're seeking affordable heavyweight sniper rifle ammo with tight tolerances made from biodegradable materials, Delta Armory 0.43g BIO EAGLE™ BBs; 1KG Bag are the way to go! These 0.43g sniper BBs are supplied in a resealable bulk bag containing approximately 2325 BBs, which will definitely save you a few quid compared to other brands!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

If you're after an affordable LiPo charger which won't make you scratch your head, the Specna Arms EASY LiPo Battery Charger is the way to go! A simple balance charger capable of charging both 7.4V and 11.1V LiPo batteries, the EASY charger makes things exactly that, supplied with a UK power supply and with charging status indicated by LEDs on the top of the housing. 

If you're after STANAG-style mid-caps, Specna has just what you need! The Specna Arms 120rnd STANAG Mid-Cap Magazine M4/AR-15 AEGs boast a realistic steel shell and polymer internals with a steel feed spring, holding 120 BBs approximately. To load the mag, we recommend using a speed loader or loading tool; simply align your filled speed loader or loading tool with the feed/fill port and load her up! 

The benefit of mid-caps is their spring-loaded internals, feeding in the same way as a real magazine, which means no battle rattle to give you away. Compatibility-wise, this mag will work in most M4/AR-15, SCAR-L and L85 AEGs, along with other platforms which are M4 AEG mag-compatible. If your loadout requires steel STANAG-style magazines, the Specna Arms 120rnd STANAG Mid-Cap Magazine M4/AR-15 AEGs is the way to go

If you need BBs for outdoor skirmishes, 0.28g BBs are what you need! The Delta Armory 0.28g EAGLE™ BBs; 1KG Bag contains 3571 BBs approximately, plenty for even the heaviest trigger finger!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BBs which won't break the bank, look no further!

If you need BBs for CQB or use in your sidearm or shotgun, 0.20g is the ideal weight for you! The Delta Armory 0.20g EAGLE™ BBs; 1KG Bag are supplied in a resealable bulk bag of 5000 BBs approximately, great for those with a heavy trigger finger!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BBs which won't break the bank, look no further!

If you're an outdoor skirmisher with a long-range-focused setup, Delta Armory 0.36g Diamond 6mm BIO BBs are what you need to feed it! Supplied in a 1KG resealable bag of 2777 BBs, approximately, these biodegradable BBs are the most affordable way to keep your long-range build in action. Being 0.36g in weight, these BBs are best used with rifles with upgraded HOP-up parts, DMRs and sniper rifles.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

If you're seeking high-grade BBs for your DMR or accurised long-range platform, the Delta Armory 0.32g EAGLE™ BBs; 1KG Bag will serve you well! These heavy-weight BBs are supplied in a 1KG bulk bag containing approximately 3120 BBs. If you're slinging more .32s than that in a single day, we want to be on your team!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BBs which won't break the bank, look no further!

If you're seeking a sidearm with premium vibes, this bundle was made with you in mind! We paired the Umarex Glock 17 Gen.5 with 2 spare magazines, 0.25g BBs, a can of SMART green gas and a speed loader to get you ready to rock with a tasty discount as a bonus. To store your premium sidearm, we even added a HASTA Pistol Hard Case; the perfect finishing touch for this professional setup! 

If you need biodegradable BBs for your pistol or shotgun, the 0.20g BIO EAGLE™ BBs; 1KG Bag from Delta Armory is a fantastic choice. Supplied in a resealable bag of 5000 BBs approximately, these biodegradable BBs are ideal for outdoor skirmishes, allowing you to let rip without worrying about long term environmental damage!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

If you need cheap green tracer BBs for some glow-in-the-dark action, Delta Armory has you covered with the 0.25g EAGLE™ Tracer BBs; 1KG Bag; Green! Supplied in a 1KG bulk bag containing approximately 4000 BBs, these tracer BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need tracer BBs which won't break the bank, look no further!

If you need some affordable BIO BBs for your upgraded setup, Delta Armory's 0.30g BIO EAGLE™ BBs; 1KG Bag are the perfect choice for outdoor skirmishing. These biodegradable BBs are supplied in a 1KG resealable bag of 3333 BBs approximately, more than enough to keep heads down in the woods!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

If you're after cheap biodegradable tracer BBs for a mix of CQB and outdoor skirmishes, load up on Delta Armory's 0.20g Tracer BIO EAGLE™ BBs; 1KG Bag! Supplied in a 1KG bulk bag containing approximately 4000 BBs, these bio tracer BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

If you need better accuracy from your LCT AK AEG, this should do it! The LCT Rotary Hop Unit for AK AEG is designed for LCT AK replicas (LCK range) but may fit other brands, though we cannot guarantee off-brand compatibility currently.

This new HOP-up design brings the rotary adjuster style to the AK platform, offering reduced side-to-side shot deviation, improved setting retention, and finer adjustment increments. Like the original slider unit, this rotary accepts standard TM AEG spec HOP-up buckings, nubs and inner barrels.

Get your DMR or upraded rifle shooting better with some 0.32g BBs! These come in a 1KG resealable bag and contain approximately 3120 BBs, more than enough to last you a few outdoor game days! These high-grade BBs are made from well-polished polymer, meaning they will be consistent and reliable.

These BBs have a tight tolerance of +/- 0.01mm maximum size deviation, so every shot should feel the exact same when you're sending a volley of BBs at your opponents, or tin cans in the garden. Pair these with a tightbore barrel and you'll be shooting happy all day!

If you're an outdoor skirmisher with a long-range-focused setup, Delta Armory 0.32g BIO EAGLE™ BBs; 1KG Bag are what you need to feed it. These biodegradable BBs are supplied in a 1KG resealable bag of 3120 BBs, approximately, plenty for even the heaviest trigger finger!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

This LiPo battery from Specna Arms is designed to fit into crane stocks. The battery connects to your AEG via a mini-Tamiya connector and provides 2000mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 12cm, allowing some flexibility when squeezing the battery into tight spaces. The Specna Arms 7.4V 2000mAh 15C LiPo Nunchuck/Crane Battery; Tamiya would be great for any Airsoft gun which requires a 7.4V LiPo, but can also be used for other electronics hobbies.

If you're after an 8.4V NiMh for an AR36 or SMG-5 handguard battery compartment, the GFC 8.4V 1600mAh Ni-Mh Block Battery; Mini Tamiya is a perfect fit! A 7-cell rechargeable NiMh battery pre-wired to a mini-Tamiya battery connector, this Block configuration battery is ideal for fixed stock battery compartments, along with AR36 and SMG-5 handguard battery compartments. Wire length is approximately 10cm, giving you a bit of extra flexibility for easy installation. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

If you're looking for a compact hydration system to minimise weight on your rig, the 8Fields Tactical 1L Hydration Bladder with Hose & Bite Valve was designed with you in mind! A compact 1L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're running a small hydration pouch like the Novritsch ASPC MOLLE Hydration Pack, this is the ideal bladder!

If you're looking for a compact hydration system to minimise weight on your rig, the 8Fields Tactical 1L Hydration Bladder with Hose & Bite Valve was designed with you in mind! A compact 1L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're running a small hydration pouch like the Novritsch ASPC MOLLE Hydration Pack, this is the ideal bladder!

If you're looking for a compact hydration system to minimise weight on your rig, the 8Fields Tactical 1L Hydration Bladder with Hose & Bite Valve was designed with you in mind! A compact 1L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're running a small hydration pouch like the Novritsch ASPC MOLLE Hydration Pack, this is the ideal bladder!

Looking for something to kit out your M-LOK or Keymod handguard? The MGPCQB PPG-S Hand Stop is an excellent unique option! This high-density polymer attachment is a comfortable place to rest your hand and prevent it from sliding forward in front of the barrel.

It has a slightly angled design so your hand sits in the optimal position for quickly switching between targets. It mounts to M-LOK and Keymod thanks to its T-link mounting system. If you need a multi-use handstop that can be used between attachment interfaces, the MGPCQB PPG-S Hand Stop is the best choice for you!

Looking for something to kit out your M-LOK or Keymod handguard? The MGPCQB PPG-S Hand Stop is an excellent unique option! This high-density polymer attachment is a comfortable place to rest your hand and prevent it from sliding forward in front of the barrel.

It has a slightly angled design so your hand sits in the optimal position for quickly switching between targets. It mounts to M-LOK and Keymod thanks to its T-link mounting system. If you need a multi-use handstop that can be used between attachment interfaces, the MGPCQB PPG-S Hand Stop is the best choice for you!

Do you need BBs for your Airsoft DMR or sniper rifle? The BLS 0.36g Airsoft Precision BBs; 1KG are a great choice! These BBs come in a resealable 1KG bag, and they contain approximately 2780 BBs. These are a great way to ensure that you don't run out of BBs for a long time!

BLS boast tight tolerances of only +/- 0.01mm maximum size deviation, and their polished polymer construction ensures that the BBs feed consistently and reliably. Pair them with a tightbore barrel and watch these BBs soar with deadly precision! The BLS 0.36g Airsoft Precision BBs; 1KG are an excellent choice for any outdoor skirmisher.

If you need a battery for a top-wired AK platform or an SMG-5K, this one is a perfect match! The Specna Arms 7.4V 1200mAh 20C LiPo Stick Battery (Mini-Tamiya) is designed for long, narrow battery compartments, measuring roughly 18cm x 1cm x 1.5cm, with an 11cm wire length, and comes pre-fitted with a Mini-Tamiya connector.

This 7.4V LiPo is made up of 2 cells combined into a single pack, delivering a 20C continuous discharge rate, 40C peak discharge, and a 1200mAh capacity.

If you're a CQB specialist seeking cheap green tracer BBs, load up on Delta Armory 0.20g EAGLE™ Tracer BBs; 1KG Bag; Green! Supplied in a 1KG bulk bag containing approximately 5000 BBs, these tracer BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need tracer BBs which won't break the bank, look no further!

If you're looking for 0.28g BIO BBs for woodland warfare, Delta Armory 0.28g BIO EAGLE™ BBs; 1KG Bag are a fine choice. These BBs are supplied in a 1KG resealable bag of approximately 3571 BBs, more than enough to dominate a woodland environment!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Mini-Tamiya connector and provides 1300mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 1300mAh 15C LiPo Nunchuck Battery; Mini-Tamiya would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

If you need mags for the stunning new Delta Armory STRIBOG™, you've found what you need! The Delta Armory 100rnd Magazine for Grand Power STRIBOG™ SP10A3 AEGs is a spring-fed mid-cap magazine, made with a transparent polymer shell showcasing realistic mock 10mm AUTO cartridges. The mag holds 100 BBs approximately and is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool.

Being designed specifically for Delta's STRIBOG™ series, it's unlikely this mag will work in other platforms, but we will be carrying out tests to confirm when we have them in hand. Sizing-wise, this mag should be a similar size and shape to UMP and UTR45 mags, meaning UMP/UTR mag pouches should be a perfect fit.

If you're after a starter sidearm with everything you need to get stuck in, here you go! Our EU17 Pre Two-tone Pistol pack includes the sporty VORSK EU17 Vented Slide GBB Pistol, a can of SMART Green Gas, 4000 Delta Armory 0.25g EAGLE BBs, a Speed Loader and a HASTA Hard Pistol Case. 

If you need spare mags, the EU17 Vented is compatible with the RAVEN 50rnd Extended Magazine for EU series, perfect for those who need extra firepower!

This revolver is iconic! The Single Action Army, also known as the Colt Peacemaker, is a revolver that has been in production since 1873. That's over 150 years that this revolver has been in production for, and it is just as loved now as it was those many moons ago when it was the U.S Army's standard issue pistol.

The Tokyo Marui Airsoft version has a full polymer body with a metal trigger. This makes it lightweight and is perfect considering it is a springer revolver, meaning you need to cock the hammer with your thumb each time you want to shoot. It comes with shells that hold a BB each and can be loaded into the revolver's 6 chambers.

This is by no means an Airsoft pistol that will carry your next Airsoft game, but it looks incredible, is crafted by Tokyo Marui, and has that satisfying revolver feel with individual shells. It's an absolute treat!

Get the BLS 0.20g Airsoft Precision BBs; 1KG Bag for all your CQB needs! These BBs come in a resealable bag and contain roughly 5000 BBs. That's plenty for all your close quarters needs such as Airsoft assault rifles, pistols, shotguns and MOSCARTs!

They're not just good for CQB; if you have a heavy trigger finger or enjoy the support gunner role, BB specifics don't matter just so long as a lot are coming out of your gun! BLS are well known for its high-quality and reliable BBs, with a consitent polish and shape meaning that all your shots feel the same.

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this battery is the perfect fit! Electro River 7.4V 1200mAh 20/40C LiPo Slim Stick Battery; Mini-Tamiya is ideal for long, slim battery compartments, measuring approximately 18.5cm x 0.8cm x 1.4cm with a 10cm wire length, and is pre-wired to a Mini-Tamiya connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 20C continuous discharge rate, a peak discharge rate of 40C and a capacity of 1200mAh. 

These are the perfect BB for an upgraded long-range focused setup! The BLS 0.32g 6mm Perfect Tracer BIO BBs come in a 1KG resealable bag and contain roughly 3120 BBs. These BBs are the perfect choice if you want to stock up for a whole month at least and do not want to worry about running out.

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinctive aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

Their polished surface ensures consistent and reliable feeding. Plus, when used with a tightbore barrel, you get great accuracy potential. If you need biodegradable tracer BBs which won't break the bank, look no further!

If you need mags for your LCT LK-33 or LK-53, you just found them! The LCT 100rnd Magazine for LK-33/53 AEG [LK004] is a spring-loaded mid-cap magazine which holds approximately 100 BBs, loaded through the fill/feed port on the top of the magazine body. 

The magazine itself is made with a realistic stamped steel shell, polymer internals and a steel feed spring, perfectly matching the shape and appearance of real HK33 25-round magazines when inserted. Compatibility-wise, this magazine is specifically for the LCT LK-33 and LK-53 AEGs, but should also work with the Electric Blowback LCT LK-33/53 variants. 

If you're looking for comfortable full-face protection which covers the head too, the JT Premise Full Face Airsoft Mask with Headshield belongs on your noggin! Designed to protect against paintballs and Airsoft BBs, this full-face mask covers your entire face, from the chin right up to the forehead, held firmly in place with an adjustable elastic head strap and an adjustable chinstrap for extra security. 

This, the "Headshield" version, also covers the top, sides and back of your head with a removable headshield made from flexible thermoplastic, making it a far lighter, more breathable and comfortable alternative to a helmet and mask combo. The pre-installed anti-fog lens is a single-pane example made from polycarbonate, but it can be swapped out for any aftermarket lens from the JT Spectra lens lineup. The internal foam padding can also be swapped out without tools, meaning if your well-used mask doesn't have to be replaced, simply swap the foam for a fresher experience! 

With a wide range of adjustments suitable for child-sized heads right up to full adult melons, the JT Premise Full Face Airsoft Mask makes a great first face protection setup or a fantastic loaner for when your mates want to get involved. If you prefer the security and comfort of single-piece face protection but you don't fancy taking BBs to the back of the head, the JT Premise Full Face Airsoft Mask with Headshield will serve you well!

For this week only (13th-21st of September 2025), we're offering the chance to kit yourself out with an M8870 V2 Gas Shotgun, and we'll throw in an 8Fields Tactical Back Scabbard, 6 extra shotgun shell magazines, a can of SMART green gas and a 1KG bulk bag of Delta Armory EAGLE™ BBs for free!

The Golden Eagle M8870 V2 is an absolute killer up close, offering the choice of 3 BBs per shot or a stunning 6 for a realistic shotgun-style spread. If you need to land hits on moving targets quickly, this is the tool to use. Being based on the proven TM M870 design, but more immune to gas leaks, running this full metal pump action in-game is an experience without equal!

The free shotgun scabbard means you can take the M8870 with you into outdoor games and keep it handy for close encounters. Having 6 shells on tap means you'll be doing a lot of pumping before you run dry, and free BBs and gas should keep you fueled for a good few games!

As mentioned, this offer is ONLY available this week, so if you want a pump-action for a great price with a pile of freebies thrown in, now is the time!

If you need an ultra-compact SMG for kissing distance engagements, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU has your back. A rock-solid build making use of a CNC-machined aluminium handguard and buffer tube with an alloy outer barrel and Carbontech™ engineering polymer receiver, the Reaper is as strong as it is light, with realistic weight distribution and plenty of accessory options built in.

Inside, the Reaper XS EMR is well-equipped, featuring a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick-change spring guide, and a sector gear delayer to maintain reliable feeding at high speeds. Also inside is a 6.01mm tightbore inner barrel, which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

This, the Reaper XS, is the shortest of the bunch, ideal for CQB sites or running as a sniper's backup, giving you competitive performance in a more compact package. If you need a platform to deal with tight turns without slowing you down, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU suits your needs perfectly!

If you need some hefty BBs for your upgraded primary, Delta Armory's 0.30g EAGLE™ BBs; 1KG Bag are the perfect choice! These BBs are supplied in a 1KG resealable bag of 3333 BBs approximately, more than enough to give the enemy what for at the peak of Airsoft range!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BBs which won't break the bank, look no further!

If you're after cheap biodegradable tracer BBs, your needs have finally been met with Delta Armory's 0.20g Tracer BIO EAGLE™ BBs; 1KG Bag. Supplied in a 1KG bulk bag containing approximately 5000 BBs, these bio tracer BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

This tiny Specna Arms 7.4V 1300mAh 30C Micro PEQ LiPo Battery is the best fit for a PEQ box wired gun, such as the Specna Arms SA-H01. It can squeeze into some tight spots, with its dimensions of 6.5x1.5x3.5cm; it will sadly not fit in PDW stocks, but may fit in some SMG and AR36 handguards.

As it is a 7.4V LiPo, it is compatible with almost every Airsoft gun, plus, its Deans-style connector is optimal as most modern Airsoft guns are coming with Deans connectors installed due to its lower electrical resistance when compared with Tamiya connectors. If you need a small battery for your Airsoft platform, the Specna Arms 7.4V 1300mAh 30C Micro PEQ LiPo Battery; Deans could be the best choice for you!

If you're running an M4 with a crane stock and need a longer-lasting battery, the GFC 9.6V 2200mAh Ni-Mh Nunchuck Battery; Mini Tamiya is a good shout. A battery of 8 cells formed into a single long cell group, this 9.6V rechargeable NiMh battery is a perfect fit for M4 AEGs with a Crane battery stock (or similar battery stock design) and also fits great in AEGs with fixed stock battery compartments (M16, etc.). Please note, to install this battery in a Crane Stock-equipped M4, you will need to place one of the cell groups inside the buffer tube. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you have your ear to the ground on the latest Airsoft releases you have probably already seen the teaser videos of the new ARP9 3.0, which takes the ARP9 shape and breaks the mould, replacing the standard but effective version 2 gearbox internals with a new G&G gearbox, dubbed the MIG (MOSFET Integrated Gearbox).

The MIG features G&G's new MOSFET system which is smaller and more efficient than ever before, and a QD spring guide to allow for easy power tuning without needing to take the gearbox apart. Other innovations include a new side folding stock system, known as the CHFS, and a new double-feed magazine. The other awesome G&G pre-upgraded internals remain, including the epic 25,000 RPM high speed motor which is ready to provide the thunderous rate of fire the ARP9 is known for.

G&G has never heard the old saying "if it ain't broken, don't fix it", and continuously seeks to improve its products with genuine innovation despite the fact that they are already amongst the best AEGs money can buy. Other AR-9 platforms, you better watch out, the ARP9 3.0 is coming in hot!

If you're looking for finishing touches to your loadout, the ACM TD202 Dummy Knife with Sheath is a great addition! A rubber mock knife with a fabric sheath included, this dummy melee weapon has a mock blade made from flexible, harmless rubber, which bends through 90° with minimal pressure applied. 

The included sheath can be mounted to belts of 2" width or less via the Velcro loop on the rear, and you can also use the brass ring at the top if you prefer the mock knife lower on your second line (belt kit). Whether you're after a safe Airsoft melee weapon or you're looking for realistic finishing touches for your loadout, the ACM TD202 Dummy Knife with Sheath will do the trick!

If you're looking for finishing touches to your loadout, the ACM TD202 Dummy Knife with Sheath is a great addition! A rubber mock knife with a fabric sheath included, this dummy melee weapon has a mock blade made from flexible, harmless rubber, which bends through 90° with minimal pressure applied. 

The included sheath can be mounted to belts of 2" width or less via the Velcro loop on the rear, and you can also use the brass ring at the top if you prefer the mock knife lower on your second line (belt kit). Whether you're after a safe Airsoft melee weapon or you're looking for realistic finishing touches for your loadout, the ACM TD202 Dummy Knife with Sheath will do the trick!

If you're looking for finishing touches to your loadout, the ACM TD202 Dummy Knife with Sheath is a great addition! A rubber mock knife with a fabric sheath included, this dummy melee weapon has a mock blade made from flexible, harmless rubber, which bends through 90° with minimal pressure applied. 

The included sheath can be mounted to belts of 2" width or less via the Velcro loop on the rear, and you can also use the brass ring at the top if you prefer the mock knife lower on your second line (belt kit). Whether you're after a safe Airsoft melee weapon or you're looking for realistic finishing touches for your loadout, the ACM TD202 Dummy Knife with Sheath will do the trick!

If you need a NiMh battery for a top-wired AK or SMG-5K/MP5K AEG, the GFC 9.6V 1600mAh Ni-Mh Stick Battery; Mini Tamiya is the way to go! A battery of 8 cells formed into a single long cell group, this 9.6V rechargeable NiMh battery is a perfect fit in AK AEGs with a battery compartment inside the dust cover or SMG-5K/MP5K AEGs with a battery housed inside the receiver. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

If you're after cheap bio tracer BBs for long-range warfare, Delta Armory's 0.30g Tracer BIO EAGLE™ BBs; 1KG Bag is the best option out there! Supplied in a 1KG bulk bag containing 3333 BBs approximately, Delta's EAGLE™ BBs are significantly cheaper than rival brands, with no sacrifice when it comes to quality.

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

If you're after affordable bio tracer BBs for an upgraded setup, Delta Armory 0.32g Tracer BIO EAGLE™ BBs; 1KG Bag are a great shout. Supplied in a 1KG bulk bag containing 3120 BBs approximately, Delta's EAGLE BBs represent unheard-of value for money, being far cheaper than rival brands. If you're used to feeding your gats with 0.32g bio tracers, we're sure you already know too well!

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Deans connector and provides 2000mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 2000mAh 15C LiPo Nunchuck Battery; Deans would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

If you love Z Co style PT-1 and PT-3 stocks but you run a primary with a 1913/20mm interface, this adapter will put a smile on your face! The LCT 1913/20mm Picatinny to Z Stock Adapter allows LCT Z Co PT-1 and PT-3 stocks to be fitted to the up-and-coming 1913/20mm Picatinny stock interface found on MPX, MCX, VMP-2S/SD/C and Delta Armory Stribog platforms.

While the 1913 interface has plenty of stock options available, the Z Stock Adapter gives you the option of mounting multi-adjustable and aggressively styled Russian-inspired stocks for a unique style up. Compatibility-wise, this adapter is confirmed to fit LCT Z Co stocks but may require modification for 5KU, CYMA, ARCTURUS or real steel Z Co PT-1 and PT-3 stocks.

If you have serious power demands and LiPo batteries don't cut it, Titan Power has you covered with the game-changing 7.4V 3000mAh Li-Ion Stick Battery; Deans Connector! Designed to fit into AR buffer tubes (some may require the stock to be extended), this power-dense Li-Ion battery has innumerable benefits over standard LiPos, including more robust steel-cased cells, larger capacity and no chance of swelling. 

Titan Power Li-Ion batteries can be charged through a standard LiPo balance charger using LiPo settings or with a B6-style smart charger (sometimes known as 4-button smart chargers) using "LiPo Balance" settings. Titan Power advise not charging using "Li-Ion" mode as this is generally intended for higher capacity batteries. 

As always, we recommend using a LiPo Safe Charging Bag for both charging and storage, and never leaving a battery on charge unattended. If you need a battery which will definitely keep your AEG going over long durations, the Titan Power 7.4V 3000mAh Li-Ion Stick Battery; Deans Connector is the best option out there!

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

If you've been browsing modern SMG designs, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG should be on your radar! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the CHARLIE™ "Standard" version, made predominantly from Delta's fibre-reinforced polymer with alloy, aluminium and steel trim parts. Designed to be agile and robust in equal measure, this STRIBOG™ variant will be an asset to any skirmisher seeking performance in a modern, mission-ready exterior.

Inside, little is standard about the STRIBOG™! Equipped with the same upgraded SHS components as Delta's M4/AR-15 series, including a polymer piston with a full steel tooth rack, a reinforced tappet plate and sector gear delayer, this beast brings Delta Armory's impressive reinforced internals to a stylish new shape. A true quick-change spring system makes power tuning easy, requiring minimal disassembly and no need to remove the gearbox from the receiver to hone the STRIBOG™ for your needs.

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven pre-upgraded internals. Whether you’re into the latest real steel SMG designs or you appreciate a versatile, agile and hostile AEG with heaps of functional benefits, the Delta Armory STRIBOG™ should be on your shopping list!

If you love head-turning AEGs with incredible build quality, the LCT AK MOE AEG has your name on it! An almost entirely steel build with a gorgeous real wood handguard, the AK MOE is one-of-a-kind, a menacing mini AK capable of feeding from LCT PP-19-01 mags or full-fat AK mags. Whether you run it as a massive pistol in its default configuration or add a 1913/20mm Picatinny stock to serve as a mean little subgun, the smile will not leave your face running the AK MOE!

Inside, the AK MOE is equipped with a version 3 gearbox with TM-compatible internals, ready for a wide range of aftermarket upgrades. Pre-installed, we have a polycarbonate piston with a full steel tooth rack, a chrome-plated brass cylinder, steel ball bearing spring guide and 18:1 steel gears running on 9mm steel bushings. Also inside is 18AWG wiring for superb electrical efficiency, a quick-change spring system for easy power tuning, a 22K RPM motor and LCT's latest AK rotary HOP-up design.

If you've never handled an LCT AK before, you're in for a real treat! Hefty, thick stamped and milled steel throughout, a flawless, hardwearing finish, practically no mag wobble or play between parts and contrasting colour tones across the design which make LCT AKs indistinguishable from the real thing, even up close. If you have an unconventional loadout planned or appreciate a unique build based on radical US Civilian builds, the AK MOE from LCT is the mould-breaking AEG you need!

If you're a fan of the US Army M4A1 look, the Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG should suit you perfectly! Taking the classic M4A1 shape, Specna Arms has given this beastly full metal build internals to match its external quality, including a powerful Dark Mattery brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate for reliable feeding and plenty more!

The PRIME™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're looking for a highly modular primary with a military aesthetic, a hefty full metal build and pre-upgraded internals to rival the best, you've just found what you need! The Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG is about the best an M4A1 AEG can get in this price range, miles ahead of its rivals!

If you're after a high-performance primary with a militant aesthetic, check out the Specna Arms SA-P04 PRIME™ M4A1 CQBR AEG! Equipped with some of the best internals we've ever seen in an out-of-the-box AEG, the SA-P04 boasts a powerful Dark Matter brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate, and much, much more!

The Prime™ is Specna's newest line of AEGs, taking its traditional AEG silhouettes and stripping away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're into the classic M4A1 look and want the best internals an out-of-the-box AEG can hope for, Specna Arms has your six with the SA-P04 PRIME™ M4A1 CQBR AEG. A beast in terms of both build quality and performance, the SA-P04 is the ideal base for any military-style custom build!

If you're into GBBRs and want something which stands out, the Salvo Precision Rattler .300BLK GBBR should be in your sights! A full metal build inspired by the real steel Rattler PDW, this beast is internally based on the Tokyo Marui ZET system, widely regarded as the best GBBR internal system out there currently.

Inside, Salvo Precision has treated us to steel trigger group components, a 6.03mm tightbore inner barrel and a steel internal bolt catch, improving long-term durability and saving you money and time on upgrading high wear parts. Thanks to its shortened MCX-inspired bolt carrier, the Rattler boasts phenomenal gas efficiency and a surprising rate of fire, with satisfying recoil and the challenging but rewarding ultra-realistic GBBR manual of arms. To make matters even better, the Rattler is supplied in a fantastic quality hard case with custom-cut foam!

Boasting a uniquely modern exterior with an M-LOK handguard, monolithic 20mm Picatinny railed receiver, ambidextrous fire controls and a 1913/20mm Picatinny stock interface, the Salvo Precision Rattler .300BLK GBBR keeps the best bits of the venerable M4/AR-15 platform with a sprinkle of enhancements from the cutting edge of modern firearms design. If you're ready to play Airsoft on legendary difficulty to showcase your skills and experience skirmishing the most realistic way, you're ready for the Rattler!

If you're looking for a lesser-seen GBBR with pinpoint performance, the Tokyo Marui Howa Type 89 ZET System GBBR should be on your shopping list. A superb quality full metal build utilising Tokyo Marui's proven ZET system internals, this GBBR replicates the Howa Type 89 assault rifle, the standard issue rifle of the Japanese Ground Self Defence Forces (JGSDF). 

Being a Japanese rifle replicated by a Japanese company, the Type 89 GBBR boasts all the realistic features a true stitch-counter would expect, including authentic Howa markings, a four-position fire selector with 3-round burst, a sliding dust cover which opens automatically when the bolt cycles and a remarkably comfortable AR-18-based pistol grip. The handguard is made from a realistic combination of stamped steel with a polymer overmould, and beneath, we are treated to an authentic short stroke piston system which cycles with each shot and looks exactly like the real deal. 

Built with a museum-worthy exterior and ZET system internals, the Type 89 brings top-tier TM performance to an exciting and rare shape. Whether you're working on a JGSDF loadout, you've got a pile of M4 ZET system mags or you collect the most realistic replicas of modern assault rifles, the Tokyo Marui Howa Type 89 ZET System GBBR will put a big smile on your face!

If you're looking for a hydration system to provide water for long-duration operations, the 8Fields Tactical 3L Hydration Bladder with Hose & Bite Valve is what you need! A 3L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're involved in longer skirmishes and need a hydration system with significant capacity, the 8Fields 3L Hydration Bladder with Hose & Bite Valve fits the bill!

If you're looking for an affordable way to stay refreshed mid-firefight, the 8Fields Tactical 2L Hydration Bladder with Hose & Bite Valve should be on your shopping list. A 2L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. Staying hydrated is the key to performance and energy in-game. With the 8Fields Tactical 2L Hydration Bladder with Hose & Bite Valve, you can skip the water breaks and do more shooting!

If you run red tracer BBs and need a cheap reload, Delta Armory 0.20g EAGLE™ Tracer BBs; 1KG Bag; Red is the way to go! Supplied in a 1KG bulk bag containing approximately 5000 BBs, these tracer BBs glow red when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Please note, not all tracer units are compatible with red tracer BBs. Please check that your unit is compatible before ordering to avoid disappointment.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need tracer BBs which won't break the bank, look no further!

If you're after an 8.4V NiMh battery for a crane stock battery compartment, the GFC 8.4V 1600mAh Ni-Mh Crane Stock Battery; Mini Tamiya is ideal. A 7-cell rechargeable NiMh battery pre-wired to a mini-Tamiya battery connector, this Crane configuration battery is ideal for rear-wired M4/AR-15 AEGs with Crane stock battery compartments. Wire length is approximately 10cm, giving you a bit of extra flexibility for easy installation. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

If you're after World War 2 replica gear to get the look to match your primary, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt will do the trick! A highly authentic replica of the real US G.I. M1 Garand cartridge belt designed to hold real steel 8-round Enbloc clips, this belt kit is made from cotton canvas with steel hardware, just like the real thing!

Being sized to fit real Enbloc clips, the pouches on this belt unfortunately don't fit Airsoft M1 Garand magazines, though they can still be used for smaller items and filled out to give your loadout a more realistic look. Sizing-wise, this belt can fit any waist size up to 43 inches and can be adjusted by sliding the belt through the steel loops on the inside. If you're working on a US G.I. loadout, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt is essential!

If you're after World War 2 replica gear to get the look to match your primary, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt will do the trick! A highly authentic replica of the real US G.I. M1 Garand cartridge belt designed to hold real steel 8-round Enbloc clips, this belt kit is made from cotton canvas with steel hardware, just like the real thing!

Being sized to fit real Enbloc clips, the pouches on this belt unfortunately don't fit Airsoft M1 Garand magazines, though they can still be used for smaller items and filled out to give your loadout a more realistic look. Sizing-wise, this belt can fit any waist size up to 43 inches and can be adjusted by sliding the belt through the steel loops on the inside. If you're working on a US G.I. loadout, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt is essential!

If you need more affordable 0.28g bio tracer ammo, Delta Armory has your back with the 0.28g Tracer BIO EAGLE™ BBs; 1KG Bag! Far cheaper than rival brands with no compromise when it comes to quality, these biodegradable green tracer BBs are supplied in a bulk bag containing approximately 3571 BBs.

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

If you're after magazines for the super slick G&G TGM SMG, you just found them! The G&G Armament 130rnd Medium Capacity Magazine for G&G TGM AEG is made with a super-strong high-density polymer shell, transparent polymer internals and a steel feed spring, featuring witness windows on the sides so you can track your round count as you shoot. 

As with other mid-cap magazines, this mag can be loaded through the fill/feed port on the top using a speed loader or loading tool. Being an innovative four-channel converging magazine design, this mag squeezes extra capacity into a standard-length mag, similarly to G&G's newest ARP9 magazines. Compatibility-wise, this mag is designed specifically for the G&G TGM R5 AEG series and is unlikely to work with other SMG-5 AEGs. If you're after mags for G&G's reinvention of the legendary MP5 design, the TGM, load up on these!

If you need an optic on your A&K M249, this is what you need to achieve it! The A&K 20mm Picatinny Railed Top Cover for M249 AEGs is a replacement original part designed for A&K's full metal M249 series, but may also fit other brands and the A&K polymer version, potentially requiring modification.

This top cover is made from alloy and includes a pre-installed steel dust cover, so you don't have to mess about swapping your old one out and getting those fiddly springs in place. The cover also includes holes so you can mount your original rear iron sight behind the rail. If you're short of an optic mounting solution for your M249 AEG, the A&K 20mm Picatinny Railed Top Cover for M249 AEGs will sort you out!

If you're into the TTI aesthetic and want a speedy Hi-Capa with aggressive looks, the Army Armament TTI Alpha Race Hi-Capa GBB Pistol; Upgraded Version should be in your sights. This slick speed-optimised Hi-Capa platform boasts full metal construction, a pre-installed 3-gun style extended compensator and an optics-ready slide, complete with an RMR/Docter footprint mounting plate.

This, the "Upgraded Version" of the Alpha Race is equipped with CNC aluminium slides and steel hammer group components thanks to a partnership between JAG Precision and Army Armament. This provides a superior finish and improved reliability over the already impressive original version, along with the performance benefits of Army Armaments latest cold resistant nozzle and its new formula for rubber parts. If you missed out on the original Alpha Race, the Upgraded Version will make you glad you waited!

Sniper rifles don't get more stylish than this! The Tokyo Marui VSR-ONE Bolt Action Sniper Rifle; Gold Edition is the latest addition to Tokyo Marui's long line of reliable and consistent sniper rifles. This, however, is a cut above the rest with its fancy gold trimmings, sleek design and completely awesome style. 

It is the modern edition of the classic VSR-10 style, opting to ditch the fixed stock and semi pistol grip for a full shape ergonomic pistol grip and streamlined folding stock! It also boasts other useful features, such as an enlarged bolt handle, M-LOK handguard and 20mm top rail!

If you love steel in large quantities, you'll love the LK-53A3  M-LOK AEG; ETU Version from LCT! Built to an incredible standard using a stamped steel receiver and welded stamped steel cocking tube, this is about as realistic as it gets in Airsoft! Inspired by the giant MP5 or mini G3 from the real steel world, this modernised example is rocking an M-LOK handguard and 1913/20mm Picatinny stock interface at the rear, giving this boomer build some zoomer customisation options!

Inside, the LK35A3 is no slouch, based around a version 2 gearbox with 18:1 steel gears running on 9mm bushings, a polycarbonate piston with a full steel tooth rack, CNC aluminium cylinder and piston heads and a steel quick-change spring guide with ball bearings in its base to reduce wear on the gearbox shell. Also inside is an in-line MOSFET/ETU to prevent trigger lockups and 18AWG low-resistance wiring for peak electrical efficiency. 

A real beast both inside and out in a head-turning design rarely seen on skirmish sites, the LCT LK53A3 brings unique custom vibes to the table in a hefty, realistic build. If you're looking for an AEG build at the peak of realism with some modern custom touches, the LCT LK-53A3 M-LOK AEG; ETU Version should be on your shopping list!